10 meg levels

gadge · 01-08-2010, 15:47

Can someone please have a look at my signal levels please to see if they are fine please.

Cable Modem Upstream
Upstream Lock : Locked
Upstream Channel ID : 2
Upstream Frequency : 22200000 Hz
Upstream Modulation : QPSK
Upstream Symbol Rate : 2560 Ksym/sec
Upstream transmit Power Level : 46.5 dBmV
Upstream Mini-Slot Size : 2

Cable Modem Downstream
Downstream Lock : Locked
Downstream Channel Id : 6
Downstream Frequency : 586750000 Hz
Downstream Modulation : QAM64
Downstream Symbol Rate : 6952 Ksym/sec
Downstream Interleave Depth : taps12Increment17
Downstream Receive Power Level : -9.4 dBmV
Downstream SNR : 35.0 dB

Peter_ · 01-08-2010, 16:36

Your Downstream at -9.4dBmV is a bit low are you having any issues.

gadge · 01-08-2010, 17:24

Quote:

Originally Posted by Masque

Your Downstream at -9.4dBmV is a bit low are you having any issues.

Not sure was getting a steady 9.39 meg up to friday but has seemed to have dropped to around 5 to 6 meg.

broadbandking · 02-08-2010, 18:06

Quote:

Originally Posted by gadge

Not sure was getting a steady 9.39 meg up to friday but has seemed to have dropped to around 5 to 6 meg.

Your best to ring them, as masque said you downstream level is too low, a tech should sort that out rather quickly, if you still have same issue then it another problem.

gadge · 03-08-2010, 15:46

Well spoke to tech support he had a look and said everything seemed fine but he did mention something about being on the borderline and our area was due to be upgraded hadn't got a clue what he was on about so agreed.

broadbandking · 03-08-2010, 17:04

Upgrading the area is prob a resegment of the UBR, this will relief the stress and stop oversubscription for a while.

gadge · 03-08-2010, 17:56

Quote:

Originally Posted by broadbandking

Upgrading the area is prob a resegment of the UBR, this will relief the stress and stop oversubscription for a while.

How does 20meg and 50 meg work is the 20 still on the same system as 10 or is that on the 50 meg system now?sorry if it sounds confusing.

Peter_ · 03-08-2010, 18:55

Quote:

Originally Posted by gadge

How does 20meg and 50 meg work is the 20 still on the same system as 10 or is that on the 50 meg system now?sorry if it sounds confusing.

2Mb, 10Mb and 20Mb are all on DOCSIS 1/1 and 50Mb is on DOCSIS 3.

broadbandking · 03-08-2010, 18:58

I throught only 20Mb users was moved to DOCSIS 1.1 to relief the stress of the lower tiers?

Peter_ · 03-08-2010, 19:03

Quote:

Originally Posted by broadbandking

I throught only 20Mb users was moved to DOCSIS 1.1 to relief the stress of the lower tiers?

I did put a slash not a dot in between the two ones, and was waiting to see who would post first.