Linksys WRT54GS Bricked? Flashing firmware. Help! - Page 2

MissCroft2U · 25-02-2007, 16:30

Quote:

Originally Posted by Cobbydaler

Did you try this reset procedure, which fixed a similar problem?

Yes, never worked.

pedantic · 25-02-2007, 16:36

Quote:

Originally Posted by MissCroft2U

How?

Try here near the bottom of the page.

SnoopZ · 25-02-2007, 16:36

Incase you have bricked it Pcworld are selling them for ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â£41.

http://www.pcworld.co.uk/martprd/sto...ory_oid=-28361

MissCroft2U · 25-02-2007, 16:58

It'll work if the ethernet on the machine worked as when I put the ethenet plug into the router from the computer, it comes up limited or no connectivity.

---------- Post added at 16:58 ---------- Previous post was at 16:48 ----------

Help please!

SnoopZ · 25-02-2007, 17:17

You're putting the ethernet into the router with the computer and router switched off?

1) Connect the computer to the router and switch on the router and let it settle.

2) Switch on the computer and you should have internet unless you've bricked the router of course or something else is wrong.

Remove all software firewalls just to make sure.

MissCroft2U · 25-02-2007, 17:21

Quote:

Originally Posted by SnoopZ

You're putting the ethernet into the router with the computer and router switched off?

1) Connect the computer to the router and switch on the router and let it settle.

2) Switch on the computer and you should have internet unless you've bricked the router of course or something else is wrong.

Remove all software firewalls just to make sure.

Yes, I've been doing that. It just doesn't work. I could re-do the firmware with the Linksys firmware if the ethernet cable was working!

SnoopZ · 25-02-2007, 17:24

If you connect the ethernet from the computer directly to the modem bypassing the router does it work?

MissCroft2U · 25-02-2007, 17:26

Quote:

Originally Posted by SnoopZ

If you connect the ethernet from the computer directly to the modem bypassing the router does it work?

Yup.

SnoopZ · 25-02-2007, 17:33

Quote:

Originally Posted by MissCroft2U

Yup.

So the ethernet does work then, so the routers the problem and not the ethernet. I'm guessing it's bricked if you've tried all of whats been said in this thread and nothings worked.

pedantic · 25-02-2007, 17:45

Don't take this the wrong way, but is everything connected up properly ?

A friend of mine called me round to hers once, because of similar problems, and she had plugged the modem into one of the Lan ports.

Modem--------> router internet port

Router Lan port-------> pc is how it should be.