You are currently viewing our boards as a guest which gives you limited access to view most of the discussions, articles and other free features. By joining our Virgin Media community you will have full access to all discussions, be able to view and post threads, communicate privately with other members (PM), respond to polls, upload your own images/photos, and access many other special features. Registration is fast, simple and absolutely free so please join our community today.
I simply cannot get my Router to work with the Cable Modem.
If i plug the Modem in via RJ45, straight into 1 PC it works fine.
Im using Dynamic IP WAN and DHCP is enabled on the router. But i get nothing at all. All the PCs are setup to recieve IPs, and it is assigning them correctly. The problem is between the Router and Modem.
You dont use PPPoE on NTL do you?
What model is the router?
As long as its set to auto detect ip and dns,it should work ok.
Connect modem to router and pc then reboot in sequence
cable modem>router>pc.
As above (you need to reboot the CM, etc). Also, a silly question, but you have connected the CM to the correct port on the router? (There have been one or two posts on here where people have connected the CM to one of the LAN ports on the router).
Services: Depends on the person and the price they're offering
Posts: 12,384
Re: NTL BB on router
Like John and maverick say, you need to do a complete reboot of all items:
Turn everything off and then back on in the following order (waiting until the device has completely rebooted and activity lights have settled before moving on to the next):
Join CF
You are here: 
NTL BB on router
You're welcome 
