digital picture quality via cable box

jinshah · 10-07-2006, 15:38

just bought a new panasonic plasma viera37px60.i wud like to know why the picture quality on my freeview is better than through the STB Cable box.i would have expected it to be the other way round. i keep getting these horizontal and vertical lines across the picture causing distortion.
i know for a fact this tv is fantastic.i ahd areally good tech install the tv so no chance of any ill connections as he double checked everything.please help.
jinshah

kfridge · 11-07-2006, 12:37

may be a silly question, but have you set the STB output to be RGB rather than the default composite?

11-07-2006, 12:40

to the forum

good advice from above

if the box is set to RGB is the scart capable of transmitting it? is it a good quality scart?

jinshah · 11-07-2006, 15:00

thanks kfridge.
you may have a point there.i think the tech may have set STB output to be RGB done that.
yes the scart is good quality.

11-07-2006, 15:40

What kit do you have connected to the TV? Maybe other scarts etc. Is the interference recognisable as coming from one of the other sources (VCR/DVD etc) It sounds like crosstalk to me, another source is interfering with the STB picture signal.

Neil · 11-07-2006, 15:43

Is the scart input on the TV an RGB one (not all scart sockets can handle true RGB)?

popper · 11-07-2006, 17:35

as creative said, its crosstalk, perhaps a bad ground someware, to test it , simply disconnect the other scart connector(s) when you see the 'horizontal and vertical lines across the picture causing distortion'.

you can see crosstalk best as the current picture cuts to black between sections of content, so tune your STB to one of the ntl 'unsubscibed channels' to see it better to try and cure it.

you should instantly see an improvement and indeed they should disappear, then its a case of working out the grounding etc.

as neil said, however you should always get RGB on at least scart 0 as thats the standard, you may or not get it on the other scarts