Change IP address

Wilmslow · 25-01-2006, 20:44

Hi, I have NTL broadband and would like to change my IP address. Can this be done? Thanks.

Chris W · 25-01-2006, 20:48

have a look at the article here for details

Wilmslow · 25-01-2006, 20:51

Thanks for the link - this is a little above my head though! Could anyone translate into laymans terms for me? Thanks!

Chris W · 25-01-2006, 21:01

Well the first important question, is why do you want to change your ip address?

Wilmslow · 25-01-2006, 21:04

Somebody used my PC and I cannot access a couple of forums I should be able to.

Chris W · 25-01-2006, 21:54

ahhh... you've been ip banned from some forums, and you want to change your ip so you can get back on them again. You'll probably get noticed and banned again quite quickly but anyway....

are you using usb or ethernet at the moment?

Wilmslow · 25-01-2006, 22:14

Using Ethernet.......

Chris W · 25-01-2006, 22:15

Then you need to change the mac of the Network Card... instructions from the article:

Changing a NIC's mac address

Windows
Go into device manager and then the properties of the network card. In the "advanced" section there is an option to change the network address/ physical address/ mac address. Check the current mac address using ipconfig /all from a command prompt and then increase the mac address by one digit. Reboot everything and you should have a new ip.

Wilmslow · 25-01-2006, 22:20

Not sure how to find the network card.......

---------- Post added at 22:20 ---------- Previous post was at 22:18 ----------

Quote:

Originally Posted by Wilmslow

Not sure how to find the network card.......

I see something called network adapter - is this it? There are lots of IP addresses in this ipconfig list.......

Chris W · 25-01-2006, 22:24

The mac address will be something like 00:02:8a:15:af:3e

Wilmslow · 25-01-2006, 22:28

Quote:

Originally Posted by Chris W

The mac address will be something like 00:02:8a:15:af:3e

1. I see nothing in this format.
2. Am I looking in the right place when I am in Network Adapters / Intel Network Connection? Thanks.

Chris W · 25-01-2006, 22:41

no you need to be in a command prompt and type

ipconfig /all

take a note of the mac, then head into the device manager

Wilmslow · 25-01-2006, 22:44

There is no mac.

Physical address
IP Address
Subnet mask
Default gateway
DHCP
DNS x 2

Chris W · 25-01-2006, 22:46

it's the physical address. the only thing in the format like i gave above- a series of 12 numbers and letters.

SnoopZ · 25-01-2006, 22:48

Quote:

Originally Posted by Wilmslow

1. I see nothing in this format.
2. Am I looking in the right place when I am in Network Adapters / Intel Network Connection? Thanks.

I can't find or change my MAC address that way either. I always change my IP by using ipconfig and releasing the IP then unplugging the modem and leaving it off atleast 18hrs. This method has worked for me everytime i've tried it.