ntl home:120 hanging from today - Page 11

deadite66 · 24-01-2006, 17:07

still ntlhm120_ntl0003.cpr for me

phoenix__ · 24-01-2006, 17:12

My ntl home 100 has just been downgraded to revision 2 firmware - although in the last 5 mins all network access (including 192.168.100.1) just stopped then started again - perhaps that was just at the point that it did downgrade.

Got an engineer booked for Saturday - hopefully I'll get a new modem anyway.

Rik · 24-01-2006, 17:12

I now have the ntlhm120_ntl0002.cpr
I will see if this makes any difference

mcmanic · 24-01-2006, 17:33

yippie back to ntlhm120_ntl0002.cpr

and now downloads back to 10meg and no disconnects.

Remember NTL - If it ain't broke don't fix it

cheers for all who have posted this problem and the good outcome

rebel · 24-01-2006, 17:34

Hi
Modem= Home 120
Mac= 00.02.8a
Town= Basingstoke

the last week i have had troubles with my modem going down eracticly, also never had 10meg yet, even though NTL contacted us saying we had it.

mcmanic · 24-01-2006, 17:41

DL: 1.25 mB/sec, deffo fixed now

Rebel - reboot your modem that'll fix your disconnects, as for not gettting 10meg thats another issue and not neccassry to do with NTL120 Home modems, as now my 120 is back to what it was before the update which looks to have just been rolled out again back to 002

rebel · 24-01-2006, 17:50

Cool thnx for checking this out Mr Oven Chips

*ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â§*

jonze · 24-01-2006, 18:14

i just rebooted my modem and the firmware changed, to:
ntlhm120_ntl0001.cpr

errr, hehe. wtf - anywhere i can check the bandwidth? the board speed test shows:
Overall Average Speed = approx 4716 Kbps, 4.63 Mbps

Albie · 24-01-2006, 18:18

Quote:

Originally Posted by Paul M

Do you have one of these modems, with v3 of the firmware ? If yes, then the answer should be obvious, if not then you have problem with similar symptoms, but not the problem this topic refers to.

No, not similar symptoms. The exact same symptoms.

joggerspark · 24-01-2006, 18:26

mine has gone back too....
Network Access : Enabled
Maximum Downstream Data Rate : 10240000 bps
Maximum Upstream Data Rate : 512000 bps
Maximum Number of CPEs : 1
Software Upgrade File Name : ntlhm120_ntl0002.cpr
Software Upgrade AdminStatus : ignoreProvisioningUpgrade
Software Upgrade OperStatus : completeFromMgt

kq501 · 24-01-2006, 18:30

Can I ask any other members if there loss of service mainly happens when using bittorrent. I constantly lose connection whenever bittorrent activity increases i.e. a torrent with many seeds/peers. Is the Ambit 120 able to accept many connections at the one time. I have no problem with speeds while surfing or downloading with any other method. Downloading via IE gets me 1.25mb sec, zooms through downloads, via DC++ very high speeds also, but with torrents, as soon as the torrent picks up more connections the modem cuts out. Thats not to say speeds aren't great cos they can be, it just cant handle many connections. I've used torrents for ages and never had any problems while on NTL 2mb broadband. I don't think it's a coincidence that the connection cuts out while using this file sharing method. This happens with/without firewall, or all other obvious fixes.

displaced · 24-01-2006, 18:34

Quote:

Originally Posted by Albie

No, not similar symptoms. The exact same symptoms.

The same symptoms doesn't really imply the same cause, however.

There's not a lot cable modems can really do. The symptoms of any problem are basically going to be one or more of: a) doesn't get a sync at all, b) loses sync after initially working ok, c) syncs, but doesn't pass data, d) syncs, passes data for a while, then stops, or d) just doesn't power on. But there can be a dozen or so causes, many of which will lead to the same symptoms.

The only thing that allows engineers to narrow down cause & effect are identifying the variables. This thread deals with symptoms that have arisen once one particular variable (the firmware) has changed.

joggerspark · 24-01-2006, 18:37

Quote:

Originally Posted by joggerspark

mine has gone back too....
Network Access : Enabled
Maximum Downstream Data Rate : 10240000 bps
Maximum Upstream Data Rate : 512000 bps
Maximum Number of CPEs : 1
Software Upgrade File Name : ntlhm120_ntl0002.cpr
Software Upgrade AdminStatus : ignoreProvisioningUpgrade
Software Upgrade OperStatus : completeFromMgt

just done a total shutdown & restart & started downloading but the same thing as befor is happening...

tomw|neowin · 24-01-2006, 19:01

mine has gone back....fingers crossed

Chrysalis · 24-01-2006, 19:04

is it not possible and better for ntl to have stuck with v1 as standard and provided the v2 as a download link. Then people could choose to install it. Also everyone on the 1 and 2 meg tiers would have been completely unaffected by this.