*ALL* ntl 10Mb Discussion (Part 3) - Page 31

markknell · 17-11-2005, 10:11

Quote:

Originally Posted by Gordon_30

I believe your modem has been updated or will be updated to run at the full 10Mb

But do you know the name of the firmware or any other identification so I know it's been upgraded.

Gordon_30 · 17-11-2005, 10:18

It should the downloaded the new configuration file named

ntlhm120_ntl0002.cpr

to your modem therefore reconfiguring it to run at 10Mb when NTL update everyone to that speed as before this update the ntl:120 modem were incapable of running at 10Mb

The modem should have rebooted automatically after the new firmware was installed or if you want to be sure you could manually reboot it yourself

mcmanic · 17-11-2005, 10:18

anybody on 3meg and using 120home modem and got the new firmware yet or is it only sent to 10meg users, i.e was it a national automatic rollout to ALL 120 cable modem, cause not got it here

it should be:
ntlhm120_ntl0002.cpr

mine is still

ntlhm120_ntl0001.cpr

Gordon_30 · 17-11-2005, 10:26

check the config page on http://192.168.100.1/ username - root pw - root
and look for this

Software Upgrade File Name : ntlhm120_ntl0002.cpr

if you see this your modem has been updated if not try rebooting it and then check again

it should have been done automatically

etccarmageddon · 17-11-2005, 10:28

very impressive that this has been done without chucking the old modems in the bin.

markknell · 17-11-2005, 10:29

Not sure if this makes a difference to me or if everyone has it

Software Upgrade AdminStatus : ignoreProvisioningUpgrade

Ignore ??

markknell · 17-11-2005, 10:30

Quote:

Originally Posted by etccarmageddon

very impressive that this has been done without chucking the old modems in the bin.

Yes, obsolutely. Just a shame I don't have it

ssdd · 17-11-2005, 10:33

Quote:

Originally Posted by etccarmageddon

very impressive that this has been done without chucking the old modems in the bin.

lets hope they can do it with the ambit 100 modems

danvitale · 17-11-2005, 10:42

..and the Motorola Surfboard 4100s... I dont want to get rid of mine if I can help it..

ssdd · 17-11-2005, 10:45

Quote:

Originally Posted by ssdd

lets hope they can do it with the ambit 100 modems

Just rebooted my modem and started it again, it then rebooted itself
went on the modem config page and it's been upgraded to
Software Upgrade File Name : ntlhm100_ntl0002.cpr
Now getting these speeds

Direction
Actual Speed
True Speed (estimated)
Downstream 9426 Kbps (1,178.3 KB/sec) 10180 Kbps (inc. overheads) Upstream 490 Kbps (61.3 KB/sec) 529 Kbps (inc. overheads)

Horace · 17-11-2005, 10:56

No auto-reboot but a manual reboot downloaded the new firmware. Getting full 10meg speeds now.

US.M@JORHAZZARD · 17-11-2005, 11:07

where can i find the firmware revision # ???

i have the little blue modem????

Thanks..

Hazz....

mcmanic · 17-11-2005, 11:17

Quote:

Originally Posted by markknell

Not sure if this makes a difference to me or if everyone has it

Software Upgrade AdminStatus : ignoreProvisioningUpgrade

Ignore ??

yeah i have that, don't know what it means and i'm still on old firmware, have rebooted cable modem twice now, Brighton area.

Hopefully someone can answer from CF team, if its meant to be a automatic firmware upgrade?

PowerUser · 17-11-2005, 11:22

My Firmware has been upgraded to the file mentioned on this thread for my NTL 120, But I only have these speeds!,
Thu, 17 Nov 2005 12:20:28 GMT
1st 128K took 187 ms = 700920 Bytes/sec = approx 5832 kbits/sec
2nd 128K took 203 ms = 645675 Bytes/sec = approx 5372 kbits/sec
3rd 128K took 188 ms = 697191 Bytes/sec = approx 5801 kbits/sec
4th 128K took 203 ms = 645675 Bytes/sec = approx 5372 kbits/sec

Is this still a Network issue?. Please help.

ssdd · 17-11-2005, 11:25

Quote:

Originally Posted by US.M@JORHAZZARD

where can i find the firmware revision # ???

i have the little blue modem????

Thanks..

Hazz....

You don't need any upgrade with that modem, it's already capable of 10mb