Wiring ethernet sockets

[Halcyon]

Hello,

I have a wired network and have cabled my rooms with wires under the floor boards. The cable is ethernet and all I have to do is plug the connector into the backs of the computers in each room.

Now instead of wire in each room, I'd like to put on a socket on to the wall.
Am I right in saying that I will need these two things:

Is this the right tool ?
HERE

And then just a socket:
HERE
Mine would be single socket though.
However, could I use a double one for more than one connection. I'm guessing not?

Does anyone have experience cutting up the Cat5 ethernet cables. And is it pretty straight forward ? I've done phone extensions before so Im guessing they are all colour coded ?

Thanks.

[Jon M]

I'm not sure that this faceplate will take a standard plugged cable or whether you'll need to wire it manually.

http://yoda.uvi.edu/InfoTech/rj45.htm

Yes, you can use a double faceplate, but it will most likely require two cables.

[Halcyon]

Yeah I'm assuming I'l have to wire it as just a back plate that could take a plug straight in, I dont think exists. I was just wondering how easy it is to wire.

Like are there any special rules to consider. I read once that the wires must not become untwisted.

[Dave Stones]

funnily enough i ordered 5 of those from cable universe the other week. they are standard punchdown connections, you don't need to spend £7 on a tool though... i used a flathead jeweller's screwdriver and it did the job fine

the punchdown connections on the rearside are all colour coded though

[altis]

I know of at least 3 standards for wiring up RJ45s. USOC for telecoms applications and T-568A and T-568B for data. And none of them seem logical to me (pairs on adjacent pins)!

What you probably want to follow is T-568B:

http://www.aptcommunications.com/ncode.htm

[Dave Stones]

oh, and i used side cutters to cut the cat5 cable. i have a special cat5 cutting and crimping tool though
__________________

yeah, thsoe sockets are 568B...
__________________

see attachment... i took a photo just for you

[Halcyon]

Ah cool, thats useful thanks.
That will make things easier. Good photo !