120M Uddingston upstream 3 channels? - Page 2

Ignitionnet · 12-07-2015, 11:33

The new firmware isn't for upstream channel bonding, it's always been able to do it.

EDIT: Incidentally 4 channel bonding is also out there now.

Kushan · 12-07-2015, 13:48

Still on the old firmware here, still on 2x QAM16 upstream channels

General Maximus · 12-07-2015, 18:11

get your change of underwear ready. I was just typing out a reply in another thread about webpages loading slowly when I went to see how much of an impact my torrents were making. When I saw it was 1.9MB/sec I spat my squash out over my keyboard. It has never gone over 1.42MB/sec since I have been on 152/12. I have been watching it for 10 mins and the lowest it has gone down to is 1.6MB/sec and it is holding steady between 1.8-1.9MB/sec atm. I rebooted the shub earleier because I noticed a new firmware revision had come down but my config remains the same (168/12.6). I half want reboot it again to see if anything changes but at the same time I don't want to lose the speed.

Given how much I must have uploaded it is interesting to see that stm hasn't kicked in either!

Kushan · 12-07-2015, 18:22

That's....not all that high?

There's a reason I don't bother with Torrents.

alanbjames · 12-07-2015, 19:01

What version is the new firmware?

General Maximus · 12-07-2015, 19:05

Quote:

Originally Posted by Kushan

That's....not all that high?

I wasn't talking about downstream, I was talking about upstream

Quote:

Originally Posted by Kushan

There's a reason I don't bother with Torrents.

I have always used private trackers and been able to max out my downstream which is why I have been using torrents since they were born.

Quote:

Originally Posted by alanbjames

What version is the new firmware?

V2.01.03

Kushan · 12-07-2015, 21:04

Quote:

Originally Posted by General Maximus

I wasn't talking about downstream, I was talking about upstream

I have always used private trackers and been able to max out my downstream which is why I have been using torrents since they were born.

V2.01.03

Ahh, well that is significant! What's your operational config saying?

jcm193 · 12-07-2015, 21:13

My superhub firmware is now on V2.01.03 and its showing 3 active up streams im in Devon

Jon22 · 12-07-2015, 21:22

Are these SH1 that have had the firmware update?

jcm193 · 12-07-2015, 21:23

superhub 2

Quote:

Originally Posted by Jon22

Are these SH1 that have had the firmware update?

General Maximus · 12-07-2015, 21:26

I have got the shub2 as well and my config has remained the same. I was hoping to see a change to 16mbits up (which would explain my nearly 2MB/sec upload speed) so the tier would be back to 10:1 at 160/16. I have just done another reset to satisfy curiosity and I am still on 2 upstreams and only one of them is qam64

Ignitionnet · 12-07-2015, 22:25

There are no plans to offer 160/16 or 152/15. There are no plans to return the tiers to 10:1 levels at this time.

alanbjames · 13-07-2015, 11:41

No updated firmware in Swansea yet.

Ignitionnet · 13-07-2015, 13:35

Most areas don't have it yet. It won't make a profound difference to performance in any event and correlating it with the extra upstream channel isn't appropriate, they're nothing to do with one another.

roughbeast · 13-07-2015, 17:32

Three channels upstream here in Coventry. I'm not sure when that happened - 6 weeks since I last checked.

Software = V2.01.03