125M Vmng300 - Page 19

carbon60 · 05-04-2011, 19:04

Quote:

Originally Posted by General Maximus

I dont know dude, when i got both my linksys routers I made some changes to the wireless settings, mac filtering, ip addressing, port forwarding etc etc

Fair enough, from what I recall Masque turned off IPFlood detection and the Firewall which you should not have to do.

Peter_ · 05-04-2011, 20:05

Quote:

Originally Posted by carbon60

You stated that you turned off a couple of things when you had it. If it worked properly you wouldn't have had to make those adjustments, it should have just worked out of the box.

All I have ticked in services are the following 2 items.

Ipsec PassThrough Enable PPTP PassThrough Enable

---------- Post added at 21:05 ---------- Previous post was at 21:02 ----------

Quote:

Originally Posted by Chrysalis

alot of people tune routers however all my other routers dont have wireless actually dropping out on defaults. maybe reduced performance but that be it.

masque did more than tuning, he connected a 2nd router to it.

I connected the Edimax as an Access Point on the end of a long ethernet cable to increase overall coverage in the house and my daughters laptop uses either device.

Many others have done the same but I have both networks in use.

carbon60 · 06-04-2011, 09:26

Quote:

Originally Posted by Masque

All I have ticked in services are the following 2 items.

Ipsec PassThrough Enable PPTP PassThrough Enable

---------- Post added at 21:05 ---------- Previous post was at 21:02 ----------

That doesn't correspond to what you stated here:

http://www.cableforum.co.uk/board/12...l#post35201284

Quote:

I logged in and went to advanced settings and unticked firewall and ipflood and it works fine.

pip08456 · 06-04-2011, 11:17

Quote:

Originally Posted by carbon60

That doesn't correspond to what you stated here:

http://www.cableforum.co.uk/board/12...l#post35201284

A bit pedantic don't you think?

If he unticked IP flood and the firewall then the other 2 would remain ticked.
Therefore he only has those 2 ticked.

carbon60 · 06-04-2011, 11:34

Quote:

Originally Posted by pip08456

A bit pedantic don't you think?

If he unticked IP flood and the firewall then the other 2 would remain ticked.
Therefore he only has those 2 ticked.

I'm not sure I understand what you mean, I don't have a SuperHub (thankfully) and so don't know every option it has.

Having to untick something like the firewall demonstrates a fault with the product. Masque says he has had no problems with the SuperHub. If there were no problems there would be no need to deactivate the firewall.

pip08456 · 06-04-2011, 12:15

I don't denyu there's a fault with the product.

I was merely commenting on your post which inferred Masque was contradicting his earlier post.

He wasn't.

carbon60 · 06-04-2011, 14:03

Quote:

Originally Posted by pip08456

I don't denyu there's a fault with the product.

I was merely commenting on your post which inferred Masque was contradicting his earlier post.

He wasn't.

Ok, clearly I don't understand what you mean. I thought that the IPflood and firewall options would be separate to the two VPN settings that Masque mentioned.

_wtf_ · 06-04-2011, 14:34

I can no longer see my modem settings on 192.168.100.1

Mick Fisher · 06-04-2011, 14:41

Quote:

Originally Posted by _wtf_

I can no longer see my modem settings on 192.168.100.1

Try rebooting it or stop using a proxy.

_wtf_ · 06-04-2011, 15:14

Quote:

Originally Posted by Mick Fisher

Try rebooting it or stop using a proxy.

LOL, connected to works VPN

Peter_ · 06-04-2011, 18:18

Quote:

Originally Posted by carbon60

That doesn't correspond to what you stated here:

http://www.cableforum.co.uk/board/12...l#post35201284

No that is exactly what I have done except I only have the 2 items above ticked and it works fine for me.

craigj2k12 · 06-04-2011, 18:36

calm down ladies.

we all know that there are problems with regards to packet loss when using the ip flood detection, and that there are browsing problems when using the firewall.

When using vpn, I found that mine only worked when PPTP passthrough was unticked. it says in the description that when it is ticked it allows PPTP traffic through, but I found that it only let the traffic through when it was unticked. you have to remember though, that there are hundreds of different ways of connecting to a VPN server, and everyone will use different settings and different software, and settings on the superhub that work for some may not work for others!

Peter_ · 06-04-2011, 18:37

Quote:

Originally Posted by craigj2k11

calm down ladies.

we all know that there are problems with regards to packet loss when using the ip flood detection, and that there are browsing problems when using the firewall.

When using vpn, I found that mine only worked when PPTP passthrough was unticked. it says in the description that when it is ticked it allows PPTP traffic through, but I found that it only let the traffic through when it was unticked. you have to remember though, that there are hundreds of different ways of connecting to a VPN server, and everyone will use different settings and different software, and settings on the superhub that work for some may not work for others!

As I do not use VPN the is no need for me to untick it.

craigj2k12 · 06-04-2011, 18:45

Quote:

Originally Posted by Masque

As I do not use VPN the is no need for me to untick it.

dont untick it then. but the information might have been useful for the peeps above who do use VPN!!

capt coax · 06-04-2011, 21:08

hit it with a hammer

i love "my precious"