|
Re: upload speed
im in Belf9 if that make sense. The area was due the updrade on feb 11 so im assuming that happen since my config on the hub says 3meg up.
I did also connect my original router to the superhub and try using that but the speed results where the same. Although it could still be a configuration error on the modem.
Some errors from the event log
Thu Feb 17 13:17:53 2011 Critical (3) Started Unicast Maintenance Ranging - No Response received - T3 time-out;CM-MAC=>>>>>>>>;CMTS-MAC=>>>>>>>>;CM-QOS=1.1;CM-VER=3.0;
Fri Feb 11 20:03:48 2011 Critical (3) DHCP FAILED - Requested Info not supported.;CM-MAC=>>>>>;CMTS-MAC=>>>>>>>;CM-QOS=1.1;CM-VER=3.0;
Fri Feb 11 20:03:40 2011 Critical (3) No Ranging Response received - T3 time-out;CM-MAC=>>>>>>>;CMTS-MAC=>>>>>>>;CM-QOS=1.0;CM-VER=3.0;
Fri Feb 11 20:02:27 2011 Critical (3) Resetting the cable modem due to docsDevResetNow
Fri Feb 11 13:52:22 2011 Critical (3) SYNC Timing Synchronization failure - Failed to acquire FEC framing;CM-MAC=>>>>>>>;CMTS-MAC=>>>>>>>;CM-QOS=1.0;CM-VER=3.0;
Fri Feb 11 13:42:54 2011 Critical (3) SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing;;CM-MAC=>>>>>>>>;CMTS-MAC=>>>>>>>;CM-QOS=1.0;CM-VER=3.0;
Fri Feb 11 13:42:54 2011 Critical (3) Received Response to Broadcast Maintenance Request, But no Unicast Maintenance opportunities received - T4 time out;CM-MAC=>>>>>>;CMTS-MAC=>>>>>>:01;CM-QOS=1.0;CM-VER=3.0;
Time Not Established Critical (3) No Ranging Response received - T3 time-out;CM-MAC=>>>>>>>>;CMTS-MAC=>>>>>>;CM-QOS=1.0;CM-VER=3.0;
Time Not Established Critical (3) DHCP FAILED - Requested Info not supported.;CM-MAC=>>>>>>>>;CMTS-MAC=>>>>>>>>;CM-QOS=1.0;CM-VER=3.0;
Time Not Established Critical (3) DHCP FAILED - Requested Info not supported.;CM-MAC=>>>>>>>>;CMTS-MAC=>>>>>>>>;CM-QOS=1.0;CM-VER=3.0;
Time Not Established Critical (3) SYNC Timing Synchronization failure - Failed to acquire FEC framing;CM-MAC>>>>>>>>;CMTS-MAC=00:00:00:00:00:00;CM-QOS=1.0;CM-VER=3.0;
|