wireless av senders,need help

bello10 · 17-12-2009, 18:09

hey im new too this site and was wondering if i could get some help on wireless av senders,i bought one last week and set it up following the instructions exactly but noting has happened,the upstairs tv is just blank,is there something im doing wrong because i have it nearly a week now and i havent got too use it yet and am very close too returning it at this stage as its starting too bother me,i was informed that thes senders work in minutes but not mines... anyone can help would be great,, thanks.

Dukefever · 17-12-2009, 22:41

You need to ensure that you plug one digi sender into the output source and then one into the input source. Depending on your tv you may have to change the setting of the AV setting. Tell us more about your other equipment

bello10 · 17-12-2009, 23:22

ive the digi sender connected too the part of my sky box that you would connect a dvd player too because i had too disconnect my dvd player too allow room for my digisender,my sky box is only a week old aswell this is all new too me so maybe i just dont have the tv downstairs and the tv upstairs on the same channel but my sky operates threw av1 downstairs so i assume thats th channell i need my tv too be on upstaiirs but as of yet nothing happened an i was told that the signal on these senders work within minutes

webcrawler2050 · 18-12-2009, 00:13

Quote:

Originally Posted by bello10

hey im new too this site and was wondering if i could get some help on wireless av senders,i bought one last week and set it up following the instructions exactly but noting has happened,the upstairs tv is just blank,is there something im doing wrong because i have it nearly a week now and i havent got too use it yet and am very close too returning it at this stage as its starting too bother me,i was informed that thes senders work in minutes but not mines... anyone can help would be great,, thanks.

What make & model do you have?

Some makes & models don't work with SKY as they should..

Dukefever · 18-12-2009, 10:18

I would look to plug the digi sender into AV2 on your TV and check the AV settings in menu and configure it to output AV1. (if this is possible) If you can tell us the model of your TV then we can help more. Once this is set up you can plug back in your DVD as it was into SKY VCR socket and leave the the other Scart plugged into the TV section of your sky box and ensure that it runs to AV1 of your TV.

This way you can send DVD & Sky pictures through the digi sender.

At the the other tv / digi point, ensure that it is plugged into the input on your tele. To test first, ensure that you have nothing else plugged into to your TV upstairs. Switch the AV channel to the one you plugged the digi sender receiver into. It does not have to be the same one as downstairs. To summarise;

Downstairs TV -

SCART DVD to SKY (VCR socket) - SCART SKY (TV socket) to AV1 TV. Plug Digi sender in AV2 of TV.

Check settings for AV in TV and ensure that the output of AV2 is set to output AV1.

Upstairs TV - SCART digi sender to AV1

Duke

LondonRoad · 18-12-2009, 10:25

There can also be interference if you have a wireless router, or there is a wireless router nearby. If so try changing to another channel on the sender and/or the router.

Dukefever · 18-12-2009, 11:58

Quote:

Originally Posted by LondonRoad

There can also be interference if you have a wireless router, or there is a wireless router nearby. If so try changing to another channel on the sender and/or the router.

Good point. There should be a couple of channels to try but make sure you set both units to the same channels. Usually there is a switch on the side of the digi senders.

Duke