| 
	
	
		
	
	
	
		|  01-11-2008, 19:59 | #1 |  
	| Inactive 
				 
				Join Date: Nov 2008 
					Posts: 4
				      | 
				 Help tp-link wr641g 
 
			
			Hi i'm having problems connecting to virgin media using wr641g tp-link router, it is connected through motorola sb4200 modem. I have put tp-link wireless card in my desktop and have exellent connection between p.c. and router, also internet works fine when direct from modem. Have tried quick set up on tp-link set up page but still no joy, although not sure on some of settings required i.e. ppoe or dynamic ip. help please.
		 |  
	|   |   |  
	
		
	
	
	
		|  01-11-2008, 22:32 | #2 |  
	| 
				 
				Join Date: Aug 2007 Location: Sunny SouthEast Services: VIP Pack 
					Posts: 692
				 | 
				
				Re: Help tp-link wr641g
			 
 
			
			If you switch off the computer then modem and router at the socket, then start in the following order: 
1) switch the modem on and wait for the lights to go steady i.e ready light stops flashing. 
2) then switch on your router  
3) then switch on your computer 
 
if you do things in this order it should pick up the basic settings then you just need to go into the router settings and setup your wifi security settings.
 
hth    |  
	|   |   |  
	
		
	
	
	
		|  01-11-2008, 23:19 | #3 |  
	| Inactive 
				 
				Join Date: Nov 2008 
					Posts: 4
				      | 
				
				Re: Help tp-link wr641g
			 
 
			
			Thanks for advice, i tried this earlier after reading similar threads regarding same problem but with different equipment, still no joy, still unsure if virgin media connection is ppoe, static ip, or dynamic ip and if i need to manually change any settings in tp-link setup. Also the modem i have (motorola sb4200) is about six years old, is it possible it may not be compatible with router? Any help or advice is really appreciated and hopefully the problem is something simple that i am overlooking. P.s. since last post i have also connected router to p.c. with network cable and not relied on wireless connection, but still no luck.
		 |  
	|   |   |  
	
		
	
	
	
		|  02-11-2008, 09:00 | #4 |  
	| 
				 
				Join Date: Aug 2007 Location: Sunny SouthEast Services: VIP Pack 
					Posts: 692
				 | 
				
				Re: Help tp-link wr641g
			 
 
			
			Anyway Welcome to the Cable Forum. 
i'm not as up on the settings as some on here. 
but i'm pretty sure you just need a dynamic ip but as i said before you should just be able to switch everything off and switch back on in the order above and it should pick it up.
 
The modem should be ok it is a little old but otherwise should be no problem, also you should not need to manually set anything up to pick up the basic settings, only when you have got connected then you go into the router settings and set up the security on it.
 
i have heard on some routers that you need to connect via a cable to the back of the router first to set it up, then you can connect via wireless, might be worth a try i know you have said you have tried it wired but did you follow the instructions above when you did it.
 
hth but i'm sure someone with more knowledge will be around soon.
 
Come on guy's help this poor chap out i'm nearly at the end of my knowledge for wireless. 
where's that zingle chap when you need him.   |  
	|   |   |  
	
		
	
	
	
		|  02-11-2008, 10:01 | #5 |  
	| Inactive 
				 
				Join Date: Nov 2008 
					Posts: 4
				      | 
				 Re: Help tp-link wr641g 
 
			
			Hey Presto it works,
 At last it is working, i carried out all the restart, but this time using a cable connection between modem and p.c. and not relying on wireless connection.
 Once connected i then found that router set up page http:// 192.168.1.1, had now got settings in the WAN, previously these were all at zero.
 
 I was going to run 2 laptops and desktop wireless, but will now probably keep desktop wired and will shortly attempt connection of laptops to router via wireless ( fingers crossed ).
 
 Saabmania, thanks for the advice, wish i had used this site earlier instead of going round in circles for days on end, plug and play my a**e.
 |  
	|   |   |  
	
		
	
	
	
		|  02-11-2008, 10:40 | #6 |  
	| 
				 
				Join Date: Aug 2007 Location: Sunny SouthEast Services: VIP Pack 
					Posts: 692
				 | 
				
				Re: Help tp-link wr641g
			 
 
			
			
	Quote: 
	
		| 
					Originally Posted by jevo  Hey Presto it works,
 At last it is working, i carried out all the restart, but this time using a cable connection between modem and p.c. and not relying on wireless connection.
 Once connected i then found that router set up page http:// 192.168.1.1, had now got settings in the WAN, previously these were all at zero.
 
 I was going to run 2 laptops and desktop wireless, but will now probably keep desktop wired and will shortly attempt connection of laptops to router via wireless ( fingers crossed ).
 
 Saabmania, thanks for the advice, wish i had used this site earlier instead of going round in circles for days on end, plug and play my a**e.
 |  no problem just glad to be of help   
i've yet to find anything that is really plug and play i think it means plug it in and play for hours trying to set it up. 
anyway hope it's all ok now this place has been a really useful wealth of info for me, i think if you stick around you will find lots of things on here to interest you.   |  
	|   |   |  
	
		
	
	
	
		|  02-11-2008, 10:49 | #7 |  
	| Inactive 
				 
				Join Date: Feb 2004 Location: There's no place like 127.0.0.1 Services: Depends on the person and the price they're offering 
					Posts: 12,384
				      | 
				
				Re: Help tp-link wr641g
			 
 
			
			Well done to both of you for getting this sorted. 
jevo    to Cable Forum
 
saabmania2, nice one    |  
	|   |   |  
	
		
	
	
	
		|  02-11-2008, 12:22 | #8 |  
	| Inactive 
				 
				Join Date: Nov 2008 
					Posts: 4
				      | 
				
				Re: Help tp-link wr641g
			 
 
			
			Thanks, yes i will stick around, like i say i have got laptops to connect to wireless yet, no doubt it will be one of those simple tasks that turns into disaster, i will also look round rest of site, it looks pretty usefull content.Thanks again
 |  
	|   |   |  
	
		
	
	
	
	
	| 
	|  Posting Rules |  
	| 
		
		You may not post new threads You may not post replies You may not post attachments You may not edit your posts 
 HTML code is Off 
 |  |  |  All times are GMT +1. The time now is 17:42. |