Far Cry 1.3 Patch Released...
27-10-2004, 11:31
|
#16
|
|
cf.mega poster
Join Date: Dec 2003
Location: Baw deep in a munter
Age: 50
Services: Initiations, rep rigging and orgies!
Posts: 5,750
|
Re: Far Cry 1.3 Patch Released...
Quote:
|
Originally Posted by Bifta
My settings are as follows: In the game it's set to "Surround 5.1" (There is no option for Dolby Digital), "Enable EAX 2" and "Hardware Mixing", I've not touched the cfg file since the install. Under the Surround Mixer for the card/Speaker Settings, it's set to "5.1 Speakers" and "Digital Output Only" (I use a set of Inspire Digital 5700's. If you can get output from each channel using the THX Setup Console then there's no reason you shouldn't be getting all the available sound in FC.
|
Weird thats what i have except i use analogue output instead of digital.
Could you let me know what those values are set to in your system.cfg file?
|
|
|
27-10-2004, 11:59
|
#17
|
|
Inactive
Join Date: Jul 2003
Location: Eglinton, Co. Derry
Posts: 7,640
|
Re: Far Cry 1.3 Patch Released...
s_CompatibleMode = "0"
s_DopplerEnable = "1"
s_DopplerValue = "1.0"
s_DummySound = "0"
s_EnableSoundFX = "1"
s_InactiveSoundIterationTimeout = "1"
s_MaxActiveSoundSpots = "100"
s_MaxHWChannels = "28"
s_MaxSoundDist = "500"
s_MinHWChannels = "16"
s_MinRepeatSoundTimeout = "200"
s_MusicEnable = "1"
s_MusicMaxPatterns = "12"
s_MusicStreamedData = "1"
s_MusicVolume = "0.5"
s_SampleRate = "44100"
s_SFXVolume = "1"
s_SoundEnable = "1"
s_SpeakerConfig = "1"
|
|
|
27-10-2004, 12:47
|
#18
|
|
cf.mega poster
Join Date: Dec 2003
Location: Baw deep in a munter
Age: 50
Services: Initiations, rep rigging and orgies!
Posts: 5,750
|
Re: Far Cry 1.3 Patch Released...
Sombody rep that boy for me - i need to spread it around a bit.
Thanks.
|
|
|
27-10-2004, 12:53
|
#19
|
|
Inactive
Join Date: Oct 2003
Location: East Midlands
Age: 48
Services: Rural BB - Radio Link via Virgin Fibre
Posts: 2,947
|
Re: Far Cry 1.3 Patch Released...
Done
|
|
|
27-10-2004, 16:21
|
#20
|
|
Inactive
Join Date: Oct 2003
Location: East Midlands
Age: 48
Services: Rural BB - Radio Link via Virgin Fibre
Posts: 2,947
|
Re: Far Cry 1.3 Patch Released...
Those of you with nVidia 6xxx cards might like to have a play with this:
http://www.nvnews.net/vbulletin/showthread.php?t=39464
|
|
|
27-10-2004, 16:54
|
#21
|
|
cf.mega poster
Join Date: Dec 2003
Location: Baw deep in a munter
Age: 50
Services: Initiations, rep rigging and orgies!
Posts: 5,750
|
Re: Far Cry 1.3 Patch Released...
|
|
|
27-10-2004, 21:49
|
#22
|
|
Inactive
Join Date: Jun 2003
Location: Los Angeles, CA
Age: 47
Posts: 6,343
|
Re: Far Cry 1.3 Patch Released...
Quote:
|
Originally Posted by Bifta
My settings are as follows: In the game it's set to "Surround 5.1" (There is no option for Dolby Digital)....
|
Very strange, here's a screenshot of mine.
I admit it's not strictly Dolby Digital because I must have got confused over another game which has it but it still says Dolby 5.1 which I assume is proper Dolby Digital.
|
|
|
27-10-2004, 22:03
|
#23
|
|
Inactive
Join Date: Jul 2003
Location: Eglinton, Co. Derry
Posts: 7,640
|
Re: Far Cry 1.3 Patch Released...
Quote:
|
Originally Posted by Richard M
Very strange, here's a screenshot of mine.
I admit it's not strictly Dolby Digital because I must have got confused over another game which has it but it still says Dolby 5.1 which I assume is proper Dolby Digital.
|
Apparently it is Dolby Digital, which is actually a bit worrying as my reciever doesn't switch to Dolby Digital when I'm playing
|
|
|
27-10-2004, 22:37
|
#24
|
|
cf.mega poster
Join Date: Dec 2003
Location: Baw deep in a munter
Age: 50
Services: Initiations, rep rigging and orgies!
Posts: 5,750
|
Re: Far Cry 1.3 Patch Released...
Like i said the Audigy 2 does not support Dolby Digital - i think the Nforce 2 boards with AC'97 do though.
|
|
|
27-10-2004, 23:01
|
#25
|
|
Inactive
Join Date: Jul 2003
Location: Eglinton, Co. Derry
Posts: 7,640
|
Re: Far Cry 1.3 Patch Released...
Quote:
|
Originally Posted by theblueraja
Like i said the Audigy 2 does not support Dolby Digital - i think the Nforce 2 boards with AC'97 do though.
|
Audigy 2 does support Dolby Digital
http://www.soundblaster.com/products/audigy2/
It's been supported since the Live 5.1
|
|
|
27-10-2004, 23:18
|
#26
|
|
cf.mega poster
Join Date: Dec 2003
Location: Baw deep in a munter
Age: 50
Services: Initiations, rep rigging and orgies!
Posts: 5,750
|
Re: Far Cry 1.3 Patch Released...
Yeah,
Your right, but IIRC i think there is a bit of a funny one with Dolby Digital and Audigys - something to do with it supporting Dolby Digital decoding but not encoding or vice versa.
I will try and find out but im off to bed now so probably tomorrow. Its not very well explained (if at all) but they hint about it in this thread over here - http://www.ntcompatible.com/thread25243-1.html - i just need to remember where i saw the page that explained it.
|
|
|
27-10-2004, 23:38
|
#27
|
|
Inactive
Join Date: Jul 2003
Location: Eglinton, Co. Derry
Posts: 7,640
|
Re: Far Cry 1.3 Patch Released...
Quote:
|
Originally Posted by theblueraja
Yeah,
Your right, but IIRC i think there is a bit of a funny one with Dolby Digital and Audigys - something to do with it supporting Dolby Digital decoding but not encoding or vice versa.
I will try and find out but im off to bed now so probably tomorrow. Its not very well explained (if at all) but they hint about it in this thread over here - http://www.ntcompatible.com/thread25243-1.html - i just need to remember where i saw the page that explained it.
|
It doesn't need to encode anything, the game already has the 5.1 sound encoded, so all the Audigy has to do is decode it to a suitable set of 5.1 speakers. I've also used an Audigy 1, 2 and ZS to output DD 5.1 (AC3) to digital speakers with no problems.
Edit: you're right, just read this on the Crytek forums
Quote:
You are trying to route an EAX signal through the coaxial. This will not work. the soudn will simple be sent out as 2 channel 48 KHz signal downsampled.
For EAX, you need to use the component outputs at the back of your card.
You will not get Dolby-Digital in an Creative labs card for games since in games you need the Dolby Digital Integrated Content Encoder.
DVD movies play fine through your coaxial because DVD movies D-D tracks are pased as is to your Dolby-Digital EXTERNAL decoder.
FarCry may(not sure) use Direct Sound to decode dolby Digital and route it through Creative labs 5.1 outputs, and you can test it to see if you get all the channels by standing infront of the ingame radio in a hut and turning 360 degrees. If the sound passes through all the speakers, you have 5.1 Dolby-digital. If not, switch to EAX 2.0, this will work fine.
Remember:
Coax + game in Dolby Digital = Soundstorm chipset only.
anything else = component output using either software decoder (propritary or DirectX) or EAX.
|
|
|
|
28-10-2004, 07:33
|
#28
|
|
Inactive
Join Date: Jun 2003
Location: Los Angeles, CA
Age: 47
Posts: 6,343
|
Re: Far Cry 1.3 Patch Released...
I just remembered which other game supported this, it's AA:SF.
I think it probably does go through EAX or something, FarCry is definitely in surround sound when I choose Dolby 5.1.
|
|
|
28-10-2004, 09:37
|
#29
|
|
cf.mega poster
Join Date: Dec 2003
Location: Baw deep in a munter
Age: 50
Services: Initiations, rep rigging and orgies!
Posts: 5,750
|
Re: Far Cry 1.3 Patch Released...
So the question is - why does rich get the option of Dolby 5.1 on the Audigy 2? Or am i thick?
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT. The time now is 05:41.
|