Superhub : Superhub 2

[StevenNT]

Originally Posted by jb66

we have our mobiles and a pda that tells you what channel the networks are on

Well, what's close enough so kind of yes

[jb66]

Originally Posted by StevenNT

Well, what's close enough so kind of yes

You can do that yourself with your own equipment, pointless sending a tech out, what happens the week after when the routers move channels

[SnoopZ]

Yes alot of people use inSSider to scan.

http://www.metageek.net/products/inssider/

[StevenNT]

Originally Posted by jb66

You can do that yourself with your own equipment, pointless sending a tech out, what happens the week after when the routers move channels

I agree there, mines set to Automatic as well but usually have no problems apart from the usual SH1 weak signal in the bedroom a short distance away in my smallish flat.

---------- Post added at 20:33 ---------- Previous post was at 20:33 ----------

Originally Posted by SnoopZ

Yes alot of people use inSSider to scan.

http://www.metageek.net/products/inssider/

Amen, it's an epic tool

[SnoopZ]

You really need the SH2 or your own router to get a better signal.

[GrimUpNorth]

Back in modem mode:



Cheers

Grim

[SnoopZ]

i wish mine looked like that but my maximum, levels off at around 40 strangely, however i don't believe the TBB is accurate with the SH2.

[craigj2k12]

Originally Posted by SnoopZ

i wish mine looked like that buy my maximum levels off at around 40 strangely, however i don't believe the TBB is accurate with the SH2.

How could it not be? Dont be brain washed by statements from VM

[SnoopZ]

Because i don't think my ping tests or speed tests reflect what i am seeing on my TBB graph.

Maybe i am wrong but if my SH1 looked like my graph of the SH2 my connection would be terrible and i have a pretty good SH1 graph.

[GrimUpNorth]

Originally Posted by craigj2k12

How could it not be? Dont be brain washed by statements from VM

Without going into specifics (because of the trial rules & I don't quite understand it), there are some issues with TBB and SH2 in router mode. However, I do think there's a problem as some trialists on 'moded' firmware no longer have issues.

Cheers

Grim

[SnoopZ]

Have the moded firmware cleared up the messy TBB graphs? i didn't think it had.

[craigj2k12]

Originally Posted by SnoopZ

Because i don't think my ping tests or speed tests reflect what i am seeing on my TBB graph.

So are you saying the SH2 responds to pings from TBB at lower priority, or that TBB send SH2 pings at low priority?

[SnoopZ]

I really don't know as i am not that clued up on all this but you can see from my 2 graphs that something is happening with the SH2 and not on my SH1 and it doesn't seem to affect the connection at all.

I also have far less jitter with the SH2 and you wouldn't think it looking at my graph.

[img]Download Failed (1)[/img]

Originally Posted by Kushan

It's the same as used on the SH1.

That was my point.

[craigj2k12]

Originally Posted by SnoopZ

I really don't know as i am not that clued up on all this but you can see from my 2 graphs that something is happening with the SH2 and not on my SH1 and it doesn't seem to affect the connection at all.

The hard evidence shows otherwise