Forum Articles
  Welcome back Join CF
You are here You are here: Home | Forum | Joining Two Component Cables

You are currently viewing our boards as a guest which gives you limited access to view most of the discussions, articles and other free features. By joining our Virgin Media community you will have full access to all discussions, be able to view and post threads, communicate privately with other members (PM), respond to polls, upload your own images/photos, and access many other special features. Registration is fast, simple and absolutely free so please join our community today.


Welcome to Cable Forum
Go Back   Cable Forum > General Discussion > Gaming Discussion

Joining Two Component Cables
Reply
 
Thread Tools
Old 02-05-2007, 12:17   #1
Broomie
Inactive
 
Join Date: May 2007
Posts: 1
Broomie is an unknown quantity at this point
Joining Two Component Cables

Hi,

I've just purchased two cables, one is the Wii Component Cable and another is a VGA to Component cable, since my TV only has a VGA input and not a Component. I connected them using phono adapters but my TV said that I had to check the signal cables. I kept trying to connect them in different ways, changing the adapters over but nothing. It may just be one of them is faulty but seeing as I only paid £20 for the lot of them I wouldn't mind connecting the two manually, by cutting the wire in half and joining them together. These are what they look like.



And obviously you've got the Wii cable as well, but the question I was wondering is whether or not connecting them manually (like you would with audio cables) work and is there something I should know in doing so?

I hope someone can help, thanks in advance!

Jamie B.
Broomie is offline   Reply With Quote
Advertisement
Old 04-05-2007, 21:56   #2
Sirpingalot
Inactive
 
Join Date: Apr 2007
Location: CH6
Age: 35
Services: VM 20Mb BB
Posts: 1,375
Sirpingalot has entered a golden reputation eraSirpingalot has entered a golden reputation eraSirpingalot has entered a golden reputation eraSirpingalot has entered a golden reputation eraSirpingalot has entered a golden reputation eraSirpingalot has entered a golden reputation eraSirpingalot has entered a golden reputation eraSirpingalot has entered a golden reputation eraSirpingalot has entered a golden reputation eraSirpingalot has entered a golden reputation eraSirpingalot has entered a golden reputation era
Re: Joining Two Component Cables

Have you got the pictures? I'd imagine you could join them manually...solder the connections.
Sirpingalot is offline   Reply With Quote
Old 04-05-2007, 22:01   #3
Druchii
cf.mega poster
 
Druchii's Avatar
 
Join Date: Mar 2006
Location: Oslo, Norway.
Age: 37
Services: Canal Digital: 50/10
Posts: 7,577
Druchii has a nice shiny star
Druchii has a nice shiny starDruchii has a nice shiny starDruchii has a nice shiny starDruchii has a nice shiny starDruchii has a nice shiny starDruchii has a nice shiny starDruchii has a nice shiny starDruchii has a nice shiny starDruchii has a nice shiny starDruchii has a nice shiny starDruchii has a nice shiny starDruchii has a nice shiny starDruchii has a nice shiny starDruchii has a nice shiny starDruchii has a nice shiny starDruchii has a nice shiny starDruchii has a nice shiny starDruchii has a nice shiny star
Re: Joining Two Component Cables

And pay the price in quality probably.
I have no idea, sorry. Just pointing out what i think might be the most likely result.
Due to interference of course.
Druchii is offline   Reply With Quote
Old 04-05-2007, 22:03   #4
zing_deleted
Guest
 
Posts: n/a
Re: Joining Two Component Cables

you would need proper connections as they are pukka cables and will spoil
  Reply With Quote
Old 04-05-2007, 22:04   #5
Druchii
cf.mega poster
 
Druchii's Avatar
 
Join Date: Mar 2006
Location: Oslo, Norway.
Age: 37
Services: Canal Digital: 50/10
Posts: 7,577
Druchii has a nice shiny star
Druchii has a nice shiny starDruchii has a nice shiny starDruchii has a nice shiny starDruchii has a nice shiny starDruchii has a nice shiny starDruchii has a nice shiny starDruchii has a nice shiny starDruchii has a nice shiny starDruchii has a nice shiny starDruchii has a nice shiny starDruchii has a nice shiny starDruchii has a nice shiny starDruchii has a nice shiny starDruchii has a nice shiny starDruchii has a nice shiny starDruchii has a nice shiny starDruchii has a nice shiny starDruchii has a nice shiny star
Re: Joining Two Component Cables

On further thought, could you route them through a DVD player or VHS player?
Druchii is offline   Reply With Quote
Old 04-05-2007, 22:17   #6
Lord Nikon
Inactive
 
Join Date: Jun 2003
Location: NW UK
Posts: 3,546
Lord Nikon has a bronze arrayLord Nikon has a bronze arrayLord Nikon has a bronze array
Lord Nikon has a bronze arrayLord Nikon has a bronze arrayLord Nikon has a bronze arrayLord Nikon has a bronze arrayLord Nikon has a bronze arrayLord Nikon has a bronze arrayLord Nikon has a bronze arrayLord Nikon has a bronze arrayLord Nikon has a bronze arrayLord Nikon has a bronze arrayLord Nikon has a bronze array
Re: Joining Two Component Cables

Zingle, you should know this, hell, I can see it in the picture... Think about the VGA spec, and what you can see in that pic...

(waits for Zing to kick himself repeatedly about 20 seconds after this heh)

VGA doesn't have the facility for a composite video input. it has seperate Horizontal Sync, Vertical Sync, and Red, Green, Blue inputs, sometimes Vsync is taken from the green gun feed with HSync being a seperate one, the pic shows 4 cables (but strangely only 3 plugs) Red, Green, Blue and White,

To input a component feed (Composite Video - yellow, stereo audio - red & white) you would need a Composite-VGA converter which you should be able to get at places like maplin, I used one once to feed a pair of 15" TFT monitors from a DVD player in a limo...

Druchii is right though, you would be better feeding them differently, via a Component-scart option, or a scart switcher
Lord Nikon is offline   Reply With Quote
Old 04-05-2007, 22:24   #7
zing_deleted
Guest
 
Posts: n/a
Re: Joining Two Component Cables

componant and composite are different? im lost at what I am meant know

---------- Post added at 22:24 ---------- Previous post was at 22:21 ----------

http://www.national-tech.com/specs/30h1-50200.htm this is the cable needed to do the job properly

or 3 of these http://www.trianglecables.com/q-119.html
  Reply With Quote
Old 05-05-2007, 01:01   #8
Tezcatlipoca
Inactive
 
Tezcatlipoca's Avatar
 
Join Date: Jun 2003
Location: Cambridge
Posts: 16,760
Tezcatlipoca has a pair of shiny starsTezcatlipoca has a pair of shiny starsTezcatlipoca has a pair of shiny starsTezcatlipoca has a pair of shiny starsTezcatlipoca has a pair of shiny stars
Tezcatlipoca has a pair of shiny starsTezcatlipoca has a pair of shiny starsTezcatlipoca has a pair of shiny starsTezcatlipoca has a pair of shiny starsTezcatlipoca has a pair of shiny starsTezcatlipoca has a pair of shiny stars
Re: Joining Two Component Cables

Quote:
Originally Posted by Lord Nikon View Post
Zingle, you should know this, hell, I can see it in the picture... Think about the VGA spec, and what you can see in that pic...

(waits for Zing to kick himself repeatedly about 20 seconds after this heh)

VGA doesn't have the facility for a composite video input. it has seperate Horizontal Sync, Vertical Sync, and Red, Green, Blue inputs, sometimes Vsync is taken from the green gun feed with HSync being a seperate one, the pic shows 4 cables (but strangely only 3 plugs) Red, Green, Blue and White,

To input a component feed (Composite Video - yellow, stereo audio - red & white) you would need a Composite-VGA converter which you should be able to get at places like maplin, I used one once to feed a pair of 15" TFT monitors from a DVD player in a limo...

Druchii is right though, you would be better feeding them differently, via a Component-scart option, or a scart switcher


Erm, component and composite are not the same, & the OP doesn't want to use composite


Quote:
Originally Posted by zinglebarb View Post
componant and composite are different? im lost at what I am meant know

Yep.


Component video (analogue, YPbPr, uses three RCA phono plugs, coloured red, green, & blue), which the OP wants to use from the Wii, is not the same as composite (yellow RCA phono plug, crappy quality).
Tezcatlipoca is offline   Reply With Quote
Old 05-05-2007, 02:20   #9
Lord Nikon
Inactive
 
Join Date: Jun 2003
Location: NW UK
Posts: 3,546
Lord Nikon has a bronze arrayLord Nikon has a bronze arrayLord Nikon has a bronze array
Lord Nikon has a bronze arrayLord Nikon has a bronze arrayLord Nikon has a bronze arrayLord Nikon has a bronze arrayLord Nikon has a bronze arrayLord Nikon has a bronze arrayLord Nikon has a bronze arrayLord Nikon has a bronze arrayLord Nikon has a bronze arrayLord Nikon has a bronze arrayLord Nikon has a bronze array
Re: Joining Two Component Cables

to my knowlege though it would still be hard to do, if not impossible, VGA spec has seperation of sync feeds, the wii doesn't seem to..

1 Left
2 Right
3 Video
4 +5VDC
5 Ground
6 Ground
7 Y R Luma
8 Mode
9 Pb G Chroma
10 Mode
11 Pr B
12 Ground
13 +12VDC
14 Data Line 1
15 Data Line 2
16 Data Line 3


So pin 3 presumably would be a composite sync feed in RGB mode, you would still need to use a VGA converter box to handle sync seperation for the VGA feed, the component video output from the wii being intended for RGB+Csync for a compatible device.

I stand corrected on my misinterpretation of the component output for the wii, but based on the above pin allocations of the multi AV port on the wii, it would appear my conclusion was still valid
Lord Nikon is offline   Reply With Quote
Old 06-05-2007, 22:53   #10
jonboy080269
Inactive
 
Join Date: Nov 2003
Location: Norwich
Age: 57
Posts: 96
jonboy080269 is on a distinguished roadjonboy080269 is on a distinguished road
Re: Joining Two Component Cables

Excuse me if I am getting the wrong idea here but I recently joined component 2 cables for a wii using the following:


http://www.tvcables.co.uk/cgi-bin/tvcables/AD013.html
http://www.tvcables.co.uk/cgi-bin/tvcables/AD003.html
jonboy080269 is offline   Reply With Quote
Old 06-05-2007, 23:26   #11
zing_deleted
Guest
 
Posts: n/a
Re: Joining Two Component Cables

They are not really high enough quality for componant cables to work correctly but hey if you get a result then bonus
  Reply With Quote
Old 07-05-2007, 00:07   #12
Sirpingalot
Inactive
 
Join Date: Apr 2007
Location: CH6
Age: 35
Services: VM 20Mb BB
Posts: 1,375
Sirpingalot has entered a golden reputation eraSirpingalot has entered a golden reputation eraSirpingalot has entered a golden reputation eraSirpingalot has entered a golden reputation eraSirpingalot has entered a golden reputation eraSirpingalot has entered a golden reputation eraSirpingalot has entered a golden reputation eraSirpingalot has entered a golden reputation eraSirpingalot has entered a golden reputation eraSirpingalot has entered a golden reputation eraSirpingalot has entered a golden reputation era
Re: Joining Two Component Cables

Seem alright to me. Gold plated too.
Sirpingalot is offline   Reply With Quote
Old 07-05-2007, 00:09   #13
zing_deleted
Guest
 
Posts: n/a
Re: Joining Two Component Cables

but componant aint the same as phono they are different levels of quality. What im saying is to connecting them with lesser standard interconnects will drop the overal standard.
  Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 04:10.


Server: lithium.zmnt.uk
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum