![]() |
Joining Two Component Cables
Hi,
I've just purchased two cables, one is the Wii Component Cable and another is a VGA to Component cable, since my TV only has a VGA input and not a Component. I connected them using phono adapters but my TV said that I had to check the signal cables. I kept trying to connect them in different ways, changing the adapters over but nothing. It may just be one of them is faulty but seeing as I only paid £20 for the lot of them I wouldn't mind connecting the two manually, by cutting the wire in half and joining them together. These are what they look like. https://www.cableforum.co.uk/images/...2007/05/56.jpg And obviously you've got the Wii cable as well, but the question I was wondering is whether or not connecting them manually (like you would with audio cables) work and is there something I should know in doing so? I hope someone can help, thanks in advance! Jamie B. |
Re: Joining Two Component Cables
Have you got the pictures? I'd imagine you could join them manually...solder the connections.
|
Re: Joining Two Component Cables
And pay the price in quality probably.
I have no idea, sorry. Just pointing out what i think might be the most likely result. Due to interference of course. |
Re: Joining Two Component Cables
you would need proper connections as they are pukka cables and will spoil
|
Re: Joining Two Component Cables
On further thought, could you route them through a DVD player or VHS player?
|
Re: Joining Two Component Cables
Zingle, you should know this, hell, I can see it in the picture... Think about the VGA spec, and what you can see in that pic...
(waits for Zing to kick himself repeatedly about 20 seconds after this heh) VGA doesn't have the facility for a composite video input. it has seperate Horizontal Sync, Vertical Sync, and Red, Green, Blue inputs, sometimes Vsync is taken from the green gun feed with HSync being a seperate one, the pic shows 4 cables (but strangely only 3 plugs) Red, Green, Blue and White, To input a component feed (Composite Video - yellow, stereo audio - red & white) you would need a Composite-VGA converter which you should be able to get at places like maplin, I used one once to feed a pair of 15" TFT monitors from a DVD player in a limo... Druchii is right though, you would be better feeding them differently, via a Component-scart option, or a scart switcher |
Re: Joining Two Component Cables
componant and composite are different? im lost at what I am meant know
---------- Post added at 22:24 ---------- Previous post was at 22:21 ---------- http://www.national-tech.com/specs/30h1-50200.htm this is the cable needed to do the job properly or 3 of these http://www.trianglecables.com/q-119.html |
Re: Joining Two Component Cables
Quote:
Erm, component and composite are not the same, & the OP doesn't want to use composite ;) Quote:
Yep. Component video (analogue, YPbPr, uses three RCA phono plugs, coloured red, green, & blue), which the OP wants to use from the Wii, is not the same as composite (yellow RCA phono plug, crappy quality). |
Re: Joining Two Component Cables
to my knowlege though it would still be hard to do, if not impossible, VGA spec has seperation of sync feeds, the wii doesn't seem to..
1 Left 2 Right 3 Video 4 +5VDC 5 Ground 6 Ground 7 Y R Luma 8 Mode 9 Pb G Chroma 10 Mode 11 Pr B 12 Ground 13 +12VDC 14 Data Line 1 15 Data Line 2 16 Data Line 3 So pin 3 presumably would be a composite sync feed in RGB mode, you would still need to use a VGA converter box to handle sync seperation for the VGA feed, the component video output from the wii being intended for RGB+Csync for a compatible device. I stand corrected on my misinterpretation of the component output for the wii, but based on the above pin allocations of the multi AV port on the wii, it would appear my conclusion was still valid |
Re: Joining Two Component Cables
Excuse me if I am getting the wrong idea here but I recently joined component 2 cables for a wii using the following:
http://www.tvcables.co.uk/cgi-bin/tvcables/AD013.html http://www.tvcables.co.uk/cgi-bin/tvcables/AD003.html |
Re: Joining Two Component Cables
They are not really high enough quality for componant cables to work correctly but hey if you get a result then bonus
|
Re: Joining Two Component Cables
Seem alright to me. Gold plated too.
|
Re: Joining Two Component Cables
but componant aint the same as phono they are different levels of quality. What im saying is to connecting them with lesser standard interconnects will drop the overal standard.
|
| All times are GMT. The time now is 03:39. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum