Are these signal levels ok

[die5el]

For the last couple of days i have been having sync issues with my modem i am in the SA1 location these are my signal levels

Cable Modem Downstream
Downstream Lock : Locked
Downstream Channel Id : 2
Downstream Frequency : 402750000 Hz
Downstream Modulation : QAM256
Downstream Symbol Rate : 5360.537 Ksym/sec
Downstream Interleave Depth : taps32Increment4
Downstream Receive Power Level : 0.2 dBmV
Downstream SNR : 41.0 dB


Cable Modem Upstream
Upstream Lock : Locked
Upstream Channel ID : 2
Upstream Frequency : 29200000 Hz
Upstream Modulation : QAM16
Upstream Symbol Rate : 2560 Ksym/sec
Upstream transmit Power Level : 41.0 dBmV
Upstream Mini-Slot Size : 2

Cable Modem Event Log
First Time Last Time Priority Description
Mon Mar 02 23:02:23 2009 Mon Mar 02 23:02:23 2009 Information (7) The s/w filename specified in the config file is the same as ...
Mon Mar 02 23:02:23 2009 Mon Mar 02 23:02:23 2009 Information (7) A software upgrade filename was specified in the config file.
Mon Mar 02 23:02:23 2009 Mon Mar 02 23:02:23 2009 Information (7) Authorized
Mon Mar 02 23:02:23 2009 Mon Mar 02 23:02:23 2009 Information (7) Registration complete!
Mon Mar 02 23:02:23 2009 Mon Mar 02 23:02:23 2009 Information (7) We registered with a DOCSIS 1.0 config file!
Mon Mar 02 23:02:23 2009 Mon Mar 02 23:02:23 2009 Information (7) Received a REG-RSP message from the CMTS...
Mon Mar 02 23:02:22 2009 Mon Mar 02 23:02:22 2009 Information (7) Sending a REG-REQ to the CMTS...
Mon Mar 02 23:02:22 2009 Mon Mar 02 23:02:22 2009 Information (7) CableModem SNMP configure complete
Mon Mar 02 23:02:19 2009 Mon Mar 02 23:02:19 2009 Information (7) IP init completed ok
Mon Mar 02 23:02:19 2009 Mon Mar 02 23:02:19 2009 Information (7) CableModem TFTP init ok
Mon Mar 02 23:02:17 2009 Mon Mar 02 23:02:17 2009 Error (4) ToD request sent- No Response received
Mon Mar 02 23:02:17 2009 Mon Mar 02 23:02:17 2009 Information (7) CableModem DHCP client init ok
Mon Mar 02 23:02:17 2009 Mon Mar 02 23:02:17 2009 Critical (3) DHCP WARNING - Non-critical field invalid in response.
Mon Mar 02 23:02:10 2009 Mon Mar 02 23:02:10 2009 Information (7) MAP w/initial maintenance region received
Mon Mar 02 23:02:09 2009 Mon Mar 02 23:02:09 2009 Information (7) Downstream sync ok
Mon Mar 02 23:02:09 2009 Mon Mar 02 23:02:09 2009 Information (7) Beginning initial ranging...
Mon Mar 02 23:02:09 2009 Mon Mar 02 23:02:09 2009 Information (7) downstream time sync acquired...
Mon Mar 02 23:02:09 2009 Mon Mar 02 23:02:09 2009 Information (7) Downstream sync ok
Mon Mar 02 23:02:09 2009 Mon Mar 02 23:02:09 2009 Information (7) starting ds time sync acquisition...
Mon Mar 02 23:02:06 2009 Mon Mar 02 23:02:06 2009 Information (7) Locked on the downstream. Waiting for UCDs...
Mon Mar 02 23:02:06 2009 Mon Mar 02 23:02:06 2009 Information (7) Downstream lock ok
Mon Mar 02 23:02:05 2009 Mon Mar 02 23:02:05 2009 Information (7) Sync Start
Mon Mar 02 23:02:05 2009 Mon Mar 02 23:02:05 2009 Critical (3) Received Response to Broadcast Maintenance Request, But no Un...
Mon Mar 02 23:02:05 2009 Mon Mar 02 23:02:05 2009 Information (7) Reset downstream scanning state!
Mon Mar 02 23:01:32 2009 Mon Mar 02 23:01:32 2009 Critical (3) Started Unicast Maintenance Ranging - No Response received - ...

any information much appreciated thanks in advance btw i am on 20meg broadband

Explain "sync issues", what happens, do you lose connection or have a loss of speed.
What happens to the lights on the modem when you have sync "issues"

Russ posted this in another thread. Have you called the status line?

Originally Posted by Russ B

I'm sure there's a recorded message on the tech support number about problems in SA1 (other than the area being an over-developed eyesore )

[Peter_]

Your power levels are fine and most modem logs look not to dissimilar to your own as the update function tends to be disabled, best to ring Tech Support and they will troubleshoot your connection and tell you if the are any issues on your connection.

[die5el]

@ xocemp when gaming on the ps3 the sync light flashes then after about 30 seconds the ready light starts to flash then i lose my internet conection then i got to reboot the modem to get the internet to work only have had this problem since i had the v box freeview installed and the engineer split the cable off the modem. I have since taken the v box freeview out of line as now i have gone to sky for the tv package but the problem persists i have just phoned tech support and a engineer is coming out today

---------- Post added at 10:58 ---------- Previous post was at 09:01 ----------

Update: Engineer from virgin came checked the signal levels they were ok ,he also changed my modem as he thought it was causing the problem so fingers crossed it all works like it use to thanks to all who gave advice