50M : Changing ubr's? fixing packet loss

[jimgors]

Hello, During peak time's i've noticed, my connection is deteriorating more and more. Ok not too the point of some fellow VM'ers on here, but it's getting "that" frustrating that i wan't to start asking question's. During peak i can get anywhere from 1-10% packet loss, being an avid gamer this is unacceptable.

My stats are near perfect afaik

ked QAM256 31 55616000 Kbits/sec 315000000 Hz 1.3 dBmV 40.4 dB Hybrid
Locked QAM256 29 55616000 Kbits/sec 299000000 Hz 1.9 dBmV 41.4 dB Hybrid
Locked QAM256 30 55616000 Kbits/sec 307000000 Hz 1.5 dBmV 40.9 dB Hybrid
Locked QAM256 32 55616000 Kbits/sec 323000000 Hz 0.9 dBmV 40.5 dB Hybrid
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV 0.0 dB Unknown
Upstream Channels
Lock Status Modulation Channel ID Max Raw Bit Rate Frequency Power
Locked ATDMA 8 20480 Kbits/sec 35800000 Hz 41.5 dBmV

Doing some digging looking at CMTS, i've noticed this;

http://ukinternetreport.co.uk/cmts/gors.png

I am on gors2, notice the ping spikes? And look at gors 1 it's nearly perfect. IS there anyway I can get on gors1?

Cheers

[Nedkelly]

Easy answer is no each area (node) ie is on ubr 10 card 3 upstream 3 .You could move to another ubr but with every one else unless a reseg is planned