SHUB2 Setup
 

Hi Chaps,
Just had a new Shub2 sent to me from Virgin and I've connected it and activated it and can get online fine (i'm online now) but my 100mb connection is currently running at around 2-3mb does it take time to get upto speed?

Sat, 07 Nov 2015 16:44:00 GMT

Test 1: 2048K took 4744 ms = 431.7 KB/sec, approx 3454 Kbps, 3.37 Mbps
Test 2: 2048K took 5038 ms = 406.5 KB/sec, approx 3252 Kbps, 3.18 Mbps
Test 3: 2048K took 4516 ms = 453.5 KB/sec, approx 3628 Kbps, 3.54 Mbps
Test 4: 4096K took 10249 ms = 399.6 KB/sec, approx 3197 Kbps, 3.12 Mbps

Overall Average Speed = approx 3383 Kbps, 3.3 Mbps


Version 1.51 : To repeat this test from the source server click here.


The new router has been up and running for around 1/2 hour now

thanks
Paul

Re: SHUB2 Setup
 

No - probably just your area. my 200 was going at 9..

Re: SHUB2 Setup
 

Strange 5 mins before I disconnected the old router I was getting 103mb+ now I can't get above 3.5mb

Re: SHUB2 Setup
 

What colour are the lights on the front? Should be all blue.

Re: SHUB2 Setup
 

Yes they are all blue, I think I might of cracked it I changed a couple of the settings in the router then rebooted and just got a speed test result of 98mb so hopefully back up and running

Re: SHUB2 Setup
 

If that's WiFi you're testing with, the acid test is to connect a wired device. Of course if you're now satisfied, no need to bother. But WiFi is not a stable nmedium and problems are almost certain to surface again if you are in a densely populated area or block of flats.

Re: SHUB2 Setup
 

The wifi on the 2AC is good IMO. on 50 it's rock solid just my area sucks

Re: SHUB2 Setup
 

Yeah all seems fine now thanks, wired well I've got nothing to wire in these days except the tivo box

Re: SHUB2 Setup
 

I get the full 200mbps via wifi on my superhub2ac .... I haven't even bothered to reconnect my linksys EA8500 :)

Re: SHUB2 Setup
 

what setting did you change that made it go from 2mbits to 100?