Cable Forum

Cable Forum (https://www.cableforum.uk/board/index.php)
-   Virgin Media Internet Service (https://www.cableforum.uk/board/forumdisplay.php?f=12)
-   -   What is the best way... (https://www.cableforum.uk/board/showthread.php?t=33681488)

Milambar 29-09-2011 14:57

What is the best way...
 
What is the best way to raise a formal complaint against the Indian call centers without it having a negative affect on me.

Allow me to explain.

My connection died this afternoon, so I called 151, and worked through the menus. I was connected to an Indian call center. The person who answered had such a thick accent which I could barely understand, I didn't even wait for him to finish his greeting. I hung up and redialed.

Repeat this 8 times, until I got a female voice, but with a much milder accent, but still difficult to understand. I explained that I was having trouble understanding her due to my hearing impediment and her accent, and could she transfer me to someone without such a thick accent.

She refused. "I am sorry, I am not able to do that." I think she said. I asked for a note to be placed on my account regarding that I was unhappy about the Indian call centers, and hung up.

After redialing 20 or so times, I finally got connected to someone with a British accent, still trying to pin it down where abouts in the UK, but it was understandable, to me.

He failed to identify the problem and scheduled an engineer, but thats another story.

Its not an attack on India or Virgin Media, not directly, I do understand why they have outsourced to India, but I feel there should be some recourse if people are finding they cannot understand the thick Indian accents.

What would be the best way of recording my dis-satisfaction?

Interestingly with regards to my loss of connection, I noticed my SH was too hot to touch, so I pointed two desk fans at it, and then a short while later, my connection was restored, and the SH was cool enough to touch. Im not happy about it being that hot, so I think I will keep the engineers appt.

thenry 29-09-2011 15:17

Re: What is the best way...
 
whats your power levels like?

192.168.0.1
login
advanced settings
connection
copy and paste what appears in the middle white column/screen

MichelleUK 29-09-2011 15:25

Re: What is the best way...
 
In future I would try posting your problem on the official Virgin Media Help forum.

I too had horrendous trouble with the Indian call centre - I could not understand them, they could not understand me, they kept "putting me through to faults" only for me to have to start again from the beginning... all soul destroying stuff.

I posted my issues on the Virgin Media forum, and both times within a couple of hours an official Virgin person had looked up my account, by using my login details I guess, looked into the problem and sorted it! Give it a try, I was well impressed! Here you go:

http://community.virginmedia.com/

qasdfdsaq 29-09-2011 16:59

Re: What is the best way...
 
Supposedly calling shortly after 8am should connect you to a UK agent but that's never worked for me.

Milambar 29-09-2011 17:15

Re: What is the best way...
 
Code:

Startup Procedure
Procedure        Status        Comment
Acquire Downstream Channel        322750000 Hz        Locked
Connectivity State        OK        Operational
Boot State        OK        Operational
Configuration File        OK       
Security        Enabled        BPI+
Downstream Channels
Lock Status        Modulation        Channel ID        Max Raw Bit Rate        Frequency        Power        SNR        Docsis/EuroDocsis locked
Locked        QAM256        100        55616000 Kbits/sec        322750000 Hz        6.2 dBmV        33.9 dB        Hybrid
Locked        QAM256        97        55616000 Kbits/sec        298750000 Hz        7.7 dBmV        33.9 dB        Hybrid
Locked        QAM256        98        55616000 Kbits/sec        306750000 Hz        7.5 dBmV        34.0 dB        Hybrid
Locked        QAM256        99        55616000 Kbits/sec        314750000 Hz        6.9 dBmV        34.0 dB        Hybrid
Unlocked        Unknown        0        0 Ksym/sec        0 Hz        0.0 dBmV        0.0 dB        Unknown
Unlocked        Unknown        0        0 Ksym/sec        0 Hz        0.0 dBmV        0.0 dB        Unknown
Unlocked        Unknown        0        0 Ksym/sec        0 Hz        0.0 dBmV        0.0 dB        Unknown
Unlocked        Unknown        0        0 Ksym/sec        0 Hz        0.0 dBmV        0.0 dB        Unknown
Upstream Channels
Lock Status        Modulation        Channel ID        Max Raw Bit Rate        Frequency        Power
Locked        ATDMA        1        20480 Kbits/sec        35800000 Hz        37.5 dBmV <-ATDMA, isnt that supposed to be bad or something?
Unlocked        Unknown        0        0 Ksym/sec        0 Hz        0.0 dBmV
Unlocked        Unknown        0        0 Ksym/sec        0 Hz        0.0 dBmV
Unlocked        Unknown        0        0 Ksym/sec        0 Hz        0.0 dBmV
Primary Downstream Service Flow
Downstream(0)
SFID        25874
Max Traffic Rate        33330000 bps
Max Traffic Burst        3044 bytes
Mix Traffic Rate        0 bps
Primary Upstream Service Flow
Upstream(0)
SFID        22711
Max Traffic Rate        3333000 bps
Max Traffic Burst        8160 bytes
Mix Traffic Rate        0 bps
Max Concatenated Burst        8160 bytes
Scheduling Type        Best Effort

My power levels as someone requested.

General Maximus 29-09-2011 18:18

Re: What is the best way...
 
your downstream power levels are borderline too high and SNR borderline too low which could be the cause of the your disconnects. Upstream power could do with being a bit higher as well. Defo worth getting an engineer out; easily fixed. The ming mongs on the end of the phone should have been able to spot that though.

There is nothing wrong with ATDMA, you are thinking of qpsk vs QAM

Ignitionnet 29-09-2011 19:00

Re: What is the best way...
 
Your power levels and SNR are all fine, given that we operate in the real world rather than laboratories where everything is perfect. If they were causing problems you would likely see performance issues, slow speeds, packet loss, well before disconnections.

Your event log might be handy.

No idea about your original query.

thenry 29-09-2011 19:24

Re: What is the best way...
 
you need a new SH thats for sure if its heating up a lot. mention it to the engineer he should fit a new SH or you can order a replacement yourself.. yes that means calling 150 but its simple, say "my SuperHub is heating up too much" agent should say ok and order you one.


All times are GMT +1. The time now is 11:54.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum