Cable Forum

Cable Forum (https://www.cableforum.uk/board/index.php)
-   Networking (https://www.cableforum.uk/board/forumdisplay.php?f=87)
-   -   Slow between Pcs on Router (https://www.cableforum.uk/board/showthread.php?t=33628666)

co103 16-02-2008 21:54

Slow between Pcs on Router
 
Hi, my son has a PC upstairs and mine is downstairs. Both are running XP and both are hard wired through a Linksys WRT54GS. When we try and exchange files its very slow. Can anyone help me to check if its setup ok. Both PCs are set to Force 100mbFull Duplex.

Thanks everyone. :)

pujro 16-02-2008 23:25

Re: Slow between Pcs on Router
 
There's a few threads on this subject on the Linksys forums, may be worth a look.
http://forums.linksys.com/linksys

popper 16-02-2008 23:33

Re: Slow between Pcs on Router
 
the easyest way to speed things up is eather go buy 2 1gig Ethernet cards and a cheap 1 gig switch, plug it into the existing router to get all the routing advantages and yet the speed for all your 1gig pluged kit for around £30.

or seeing as you only have two machines, just a cross-over cable or adapter and patch lead, and connect them directly together.

BTW forcing 100mb Full Duplex doesnt always work, its usually better to just use auto on all the kit including the router.

haydnwalker 16-02-2008 23:37

Re: Slow between Pcs on Router
 
I agree with popper - forcing 100mbit full duplex can sometimes cause problems. Let them all auto-sense.

Do your LAN PCs have Static IP Addresses or DHCP? If they are static IPs, is one of the DNS servers on the PCs set as the router? If they are set differently it could cause routing issues (router looking at internet before local network for pc being accessed).

co103 18-02-2008 01:32

Re: Slow between Pcs on Router
 
Thanks for all your replies. I will try them and see.
Basically, I have a wireless wrt54gs that is being used wired to the two pcs. I also have a 10/100 standard Linksys router - I was under the impression that I could run them together and establish a faster link. Currently, the standard one is not connected. Firstly, I will change them to auto and see. Thanks again though.
Regards 103


All times are GMT +1. The time now is 21:53.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum