Cable Forum

Cable Forum (https://www.cableforum.uk/board/index.php)
-   Networking (https://www.cableforum.uk/board/forumdisplay.php?f=87)
-   -   Networking laptop with other machine. (https://www.cableforum.uk/board/showthread.php?t=33614439)

Nidge 18-05-2007 05:01

Networking laptop with other machine.
 
Advice pleas chaps and lasses, I'm after networking my laptop and tower together, I've tried it a few time but can't get the laptop to recognise my tower, I've connected the two with an ethernet cable via the ethernet cards and gone through the motions but nothing happens. Both machines are turned on but like I say nothing hapens, any ideas folks?

Druchii 18-05-2007 07:11

Re: Networking laptop with other machine.
 
Are you using a crossover cable?

Paul K 18-05-2007 08:16

Re: Networking laptop with other machine.
 
Gone through the motions?

JMcB 18-05-2007 09:38

Re: Networking laptop with other machine.
 
Buy a wee cheep Hub.

LSainsbury 18-05-2007 11:41

Re: Networking laptop with other machine.
 
Nidge - first - if you connected them directly together you'll need a crossover cable - else you'll need a switch or something similar.

Next - you'll need to set static IP addresses on your NICs. When you have done that - try and ping the two IP addresses from the laptop / machine.

Once you have got that far that us know!

---------- Post added at 11:41 ---------- Previous post was at 11:41 ----------

Quote:

Originally Posted by Paul (Post 34307662)
Gone through the motions?

*Parp*

:Yikes::disturbd:

Nidge 18-05-2007 22:15

Re: Networking laptop with other machine.
 
Quote:

Originally Posted by Druchii (Post 34307637)
Are you using a crossover cable?

No just a normal ethernet cable I got with an old router.

---------- Post added at 22:15 ---------- Previous post was at 22:13 ----------

Quote:

Originally Posted by lsainsbury (Post 34307893)
Nidge - first - if you connected them directly together you'll need a crossover cable - else you'll need a switch or something similar.

Next - you'll need to set static IP addresses on your NICs. When you have done that - try and ping the two IP addresses from the laptop / machine.

Once you have got that far that us know!

---------- Post added at 11:41 ---------- Previous post was at 11:41 ----------



*Parp*

:Yikes::disturbd:

Ah so I need a crossover cable? I thought a normal ethernet cable would have been suffice.

Wicked_and_Crazy 18-05-2007 22:16

Re: Networking laptop with other machine.
 
Quote:

Originally Posted by Nidge (Post 34308589)
No just a normal ethernet cable I got with an old router.

dont need a cross over cable if using a router

do need a cross over cable or cross over adaptor and straight through cable if not use a router

popper 19-05-2007 01:55

Re: Networking laptop with other machine.
 
Quote:

No just a normal ethernet cable I got with an old router
NTL/BB<===>tower-netcard1
laptop-netcard1<===>switch/AP<===>tower-netcard2

set the tower-netcard2 to 192.168.0.1
set the tower-netcard1 to auto
set the laptop to 192.168.0.2


<===> equals straight through cable
<=x=> equals cross-over cable or adaptor , not needed if you have the router/switch/AP as thats the x-over bit.

OHH router not the older kit.....

so its

NTL/BB<===>router-WAN-port
tower<===>router LAN-port1
laptop<===>router LAN-port2

Nidge 19-05-2007 06:20

Re: Networking laptop with other machine.
 
Quote:

Originally Posted by Wicked_and_Crazy (Post 34308595)
dont need a cross over cable if using a router

do need a cross over cable or cross over adaptor and straight through cable if not use a router


I just want to wire them together so I can swap files from my laptop to my tower, they are sat at the side of each other so a crossover cable would be ok, the router is right at the front of the house, not enough cable to do that.

popper 19-05-2007 07:41

Re: Networking laptop with other machine.
 
laptop-netcard1<=x=>tower-netcard1

laptop 192.168.0.2
tower 192.168.0.1
just do it......

LSainsbury 19-05-2007 12:38

Re: Networking laptop with other machine.
 
Quote:

Originally Posted by popper (Post 34308788)
laptop-netcard1<=x=>tower-netcard1

laptop 192.168.0.2
tower 192.168.0.1
just do it......

Thats exactly it...

Crossover cable is the key when connecting directly and not using a router / switch etc.

Nidge 22-05-2007 18:33

Re: Networking laptop with other machine.
 
I got a crossover cable yesterday plugged the two together but nothing happend, the Ethernet card is saying limited or no connection, my other machine is turned on but the laptop is not picking it up.

Paul K 22-05-2007 19:12

Re: Networking laptop with other machine.
 
Isn't there a wizard for networking in my network places? Are both PCs in the same workgroup?

Nidge 22-05-2007 19:41

Re: Networking laptop with other machine.
 
Quote:

Originally Posted by Paul (Post 34311435)
Isn't there a wizard for networking in my network places? Are both PCs in the same workgroup?


Yeah tried the wizard but all that keeps coming up with is no network connection regarding the ethernet card.

LSainsbury 22-05-2007 19:42

Re: Networking laptop with other machine.
 
Quote:

Originally Posted by Nidge (Post 34311449)
Yeah tried the wizard but all that keeps coming up with is no network connection regarding the ethernet card.

That's because it's still on DHCP - you need to set static IP addresses - see my post above!


All times are GMT +1. The time now is 13:30.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum