wrt54g Firmware version 2.02.7
 

Can anyone help please. I have the linksys WRT54G broadband router and I'm having problems with the NAT on my xbox360 wireless set up. The NAT changes by itself from a Moderate setting to Strict - this is causing me problems when trying to connect to other peoples games on xbox live. Looking at the xbox support site they recommend the firmware version as 2.02.7.tgz I'm downloading this now, it weighs in at 147MB which seems strange as its supposed to be a zipped file?? To cut to the chase, will this help with the NAT settings (I believe the setting should be set to Open for the best possible connection) or is something else causing this? I've posted on the xbox forum but I'm getting no help/messages from there and hoping the network forum can advise. Cheers.

Re: wrt54g Firmware version 2.02.7
 

All the firmware here seems large so i'd just go ahead and install it. :)

Re: wrt54g Firmware version 2.02.7
 

You're downloading the source code...

Don't know what version you've got, but the firmware for v6 is only 1.48Mb... ;)

Re: wrt54g Firmware version 2.02.7
 

That is the source code. The maximum amount of flash memory on the Linksys routers is around 15-20 meg, so a 147 meg firmware just wouldn't fit.

Re: wrt54g Firmware version 2.02.7
 

Yes was aware of this after i posted. On the WRT54G the flash memory is only 2-4meg. :)

Re: wrt54g Firmware version 2.02.7
 

Thanks for the replys.;) Thought it was way to large for what i need.:D Not sure where to look now for the version that Microsoft say is needed:confused: Cheers anyway for your help.:tu:

Re: wrt54g Firmware version 2.02.7
 

What version is your router?

Go here & select the version of your router...

Think this will only give you the latest firmware version though.

Re: wrt54g Firmware version 2.02.7
 

You can find out what version of WRT54G you have by looking at your s/n prefix and going here.

Re: wrt54g Firmware version 2.02.7
 

The firmware version on my router is showing as v4.00.7

Re: wrt54g Firmware version 2.02.7
 

As Druchii says, go here & check the first four characters of your router's serial number against the first table.

That'll tell you which version to choose for the latest firmware on the Linksys site here...

Can you provide a link to where Xbox support are suggesting a firmware version?

Re: wrt54g Firmware version 2.02.7
 

The first four characters are CDF3 on the serial number so that makes it version number 1.1

The link for the supported firmware on xbox support here: -http://www.xbox.com/en-GB/support/xb...aq/routers.htm

If you look down the table it shows the WRT54G and says version 2.02.7 but this is for the source code???

Re: wrt54g Firmware version 2.02.7
 

SnoopZ actually ;)

Although i have said ot before in a few posts :p:

Re: wrt54g Firmware version 2.02.7
 

What version is your firmware at the moment? Of it's any less than the latest (4.20.8) then download it...

The Xbox link was probably suggesting a firmware for another version...

Just try getting the latest version for your router & see if that helps... ;)

---------- Post added at 21:04 ---------- Previous post was at 21:01 ----------

Ooops, SnoopZ... :blush: :doh:

Re: wrt54g Firmware version 2.02.7
 

Cheers. Seeing as I now know what version the router is, I'll check for a new firmware version if available from the linksys site. Thanks again for your help.

;)

Re: wrt54g Firmware version 2.02.7
 

Latest for your model is 4.20.8 and this is for the UK market not US.

I found this piece of info which may help you. :)