Cable Forum

Cable Forum (https://www.cableforum.uk/board/index.php)
-   Networking (https://www.cableforum.uk/board/forumdisplay.php?f=87)
-   -   LinkSys WRT54GS with Virgin Broadband, help needed! (https://www.cableforum.uk/board/showthread.php?t=33628387)

fabz 11-02-2008 10:18

LinkSys WRT54GS with Virgin Broadband, help needed!
 
Hi guys, just a general question which is probably really simple but im no good at networking and the like!
I set up my router and everything works like a charm but there is one problem..when i switch on my computer and power up the router for the first time in the morning the internet is not automatically connected and so i have to go to the router settings page,fiddle about a bit and change the config from automatic DCHP to a different setting then back and then everything works fine??
Can somebody please help me with this as its a bit tedious, and I've tried on other forums but no one seems to reply!!
Thanks and hope to receive a reply soon!

southwell 11-02-2008 10:24

Re: LinkSys WRT54GS and Virgin Broadband, help needed!
 
Sounds like it's not picking up an IP address from the router. Have you tried a firmware update for the router?

fabz 11-02-2008 10:25

Re: LinkSys WRT54GS and Virgin Broadband, help needed!
 
No..where would i be able to access a firmware upgrade from? Sorry I'm really rubbish with stuff like this :(

lordy 11-02-2008 10:25

Re: LinkSys WRT54GS with Virgin Broadband, help needed!
 
Quote:

Originally Posted by fabz (Post 34487141)
when i switch on my computer and power up the router for the first time in the morning the internet is not automatically connected ...

Hi, If you switch on the router you should also power cycle the modem first, when they sync light is steady, then switch on the router?

ikthius 11-02-2008 10:26

Re: LinkSys WRT54GS with Virgin Broadband, help needed!
 
http://www.cableforum.co.uk/board/ne...e=1&p=34487148
http://www.cableforum.co.uk/board/87...lp-needed.html

2 of the same post......... & only 2 mins apart.

fabz 11-02-2008 10:29

Re: LinkSys WRT54GS with Virgin Broadband, help needed!
 
aah ok so i power on my virgin dsl modem before the router??

---------- Post added at 10:29 ---------- Previous post was at 10:27 ----------

Quote:

Originally Posted by ikthius (Post 34487149)

yeah sorry mate i realised i posted one in the wrong forum and i don't have a clue how to get rid of it.

MadGamer 11-02-2008 10:30

Re: LinkSys WRT54GS and Virgin Broadband, help needed!
 
Quote:

Originally Posted by fabz (Post 34487147)
No..where would i be able to access a firmware upgrade from? Sorry I'm really rubbish with stuff like this :(

here you go http://www-uk.linksys.com/servlet/Sa...ypage=download

:)

fabz 11-02-2008 10:34

Re: LinkSys WRT54GS and Virgin Broadband, help needed!
 
Cheers for the link but i just checked and i think i have the latest version?
Says i have version 7.50.2

southwell 11-02-2008 10:35

Re: LinkSys WRT54GS and Virgin Broadband, help needed!
 
Write down all the settings you have, SSID, security keys etc and retore the factory defaults of the router. Then put them back in.

Eric55 11-02-2008 10:36

Re: LinkSys WRT54GS and Virgin Broadband, help needed!
 
I had the same problem, updated the firmware and also phoned Linksys the only way round was to leave the router powered on.

fabz 11-02-2008 10:41

Re: LinkSys WRT54GS and Virgin Broadband, help needed!
 
Quote:

Originally Posted by southwell (Post 34487156)
Write down all the settings you have, SSID, security keys etc and retore the factory defaults of the router. Then put them back in.

Right I'll try this and tell you how it goes! When you say 'restore the factory defaults' do you mean just do a hard reset by holding the reset button on the back?

southwell 11-02-2008 10:49

Re: LinkSys WRT54GS and Virgin Broadband, help needed!
 
Quote:

Originally Posted by fabz (Post 34487164)
Right I'll try this and tell you how it goes! When you say 'restore the factory defaults' do you mean just do a hard reset by holding the reset button on the back?

Either that or do it in the firmware.

fabz 11-02-2008 11:35

Re: LinkSys WRT54GS and Virgin Broadband, help needed!
 
I think its all sorted now, reset the router and configured everything again and when i turned on my PC it was working fine!
Thanks mate :)
also one last question, is there any way i can have my laptop which is connected to the router via wireless send print documents to my PC which is hard wired to the router?
Thanks

southwell 11-02-2008 11:59

Re: LinkSys WRT54GS and Virgin Broadband, help needed!
 
Yeh, right click your printer and 'share' it. Now add a printer from the laptop and search the network for the printer, job done. You will need the pc switched on for it to print. Make sure the workgroups are the same for the PC's too.

xpod 11-02-2008 12:05

Re: LinkSys WRT54GS and Virgin Broadband, help needed!
 
If the printer is to connected your desktop and you want to share the printer then, you need to find the printer on the network from your laptop to install it.
On your laptop run the printer setup wizard for a network printer.Because your laptop is wireless should`nt be any different after you're connected to the router. The method to setup a printer on your laptop is exactly the same as the process to setup the printer on the desktop.

Of course thats Windows so i might have it wrong:dozey::)

---------- Post added at 12:05 ---------- Previous post was at 12:03 ----------

Quote:

Make sure the workgroups are the same for the PC's too
Or of course,i might forget something important;)

southwell 11-02-2008 12:12

Re: LinkSys WRT54GS and Virgin Broadband, help needed!
 
Quote:

Originally Posted by xpod (Post 34487214)

---------- Post added at 12:05 ---------- Previous post was at 12:03 ----------



Or of course,i might forget something important;)

It's only important if their different. ;):p:

fabz 11-02-2008 13:25

Re: LinkSys WRT54GS and Virgin Broadband, help needed!
 
Still having problems with setting up the printer thing but i appreciate the help!!

tucker61 11-02-2008 17:34

Re: LinkSys WRT54GS with Virgin Broadband, help needed!
 
why switch off modem at night? Being green? When switching back on leave it 30 seconds before switching router back on.

hokkers999 11-02-2008 21:22

Re: LinkSys WRT54GS with Virgin Broadband, help needed!
 
Quote:

Originally Posted by fabz (Post 34487141)
Hi guys, just a general question which is probably really simple but im no good at networking and the like!
I set up my router and everything works like a charm but there is one problem..when i switch on my computer and power up the router for the first time in the morning the internet is not automatically connected and so i have to go to the router settings page,fiddle about a bit and change the config from automatic DCHP to a different setting then back and then everything works fine??
Can somebody please help me with this as its a bit tedious, and I've tried on other forums but no one seems to reply!!
Thanks and hope to receive a reply soon!

Sorry when you do what? It's a service, not designed to be switched off! Leave it on.

Morden 12-02-2008 00:34

Re: LinkSys WRT54GS with Virgin Broadband, help needed!
 
I have both Modem & router on same 4 way and as long as you power them 1st amd wait till lights are on modem before powering on PC you should be ok. I got the same problem when powering on PC 1st.

I have PC on suspend to Ram on a different socket and leave it on.

MovedGoalPosts 12-02-2008 01:29

Re: LinkSys WRT54GS with Virgin Broadband, help needed!
 
Duplicate threads have been merged.

popper 12-02-2008 02:03

Re: LinkSys WRT54GS with Virgin Broadband, help needed!
 
Quote:

Originally Posted by fabz (Post 34487141)
Hi guys, just a general question which is probably really simple but im no good at networking and the like!
I set up my router and everything works like a charm but there is one problem..when i switch on my computer and power up the router for the first time in the morning the internet is not automatically connected and so i have to go to the router settings page,fiddle about a bit and change the config from automatic DCHP to a different setting then back and then everything works fine??

Can somebody please help me with this as its a bit tedious, and I've tried on other forums but no one seems to reply!!
Thanks and hope to receive a reply soon!

the simple answer,stop turning off the router, (and the VM CM)its suposed to be kept turned on, thats the point, its only a few milliamp and takes virtually no power, especially compared to your LAN side connected PC kit.

fabz 12-02-2008 08:27

Re: LinkSys WRT54GS with Virgin Broadband, help needed!
 
Cheers guys :) Left my router on last night and it worked fine for me this morning!
Just still trying to work out how to share my printer! i don't have a clue why i cant :(

tucker61 12-02-2008 17:42

Re: LinkSys WRT54GS with Virgin Broadband, help needed!
 
what operating system, xp or vista. Ether way find the printer on the pc, right click, go into properties. Click on share ( something like that)
Then go on laptop, click add printer, then find printer on network.
That is working from memory, so might be some small errors.

fabz 12-02-2008 18:11

Re: LinkSys WRT54GS with Virgin Broadband, help needed!
 
I am running on Windows XP.
Every time i try to set this up it says on my laptop that the printer cannot be found on the network? Even though i have definitely set it up right on my desktop PC it still says this! Arrgghh!! :(

Cruachan 15-02-2008 15:41

Re: LinkSys WRT54GS with Virgin Broadband, help needed!
 
Quote:

Originally Posted by fabz (Post 34487141)
..when i ... power up the router for the first time in the morning !

This sort of networking kit is designed to be left running 24 hours a day. Unless there is a particular reason why you have to, or want to, turn it off, just leave it on.


All times are GMT +1. The time now is 19:32.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum