![]() |
Re: Wireless Router Problem
Quote:
Hi Rob Do you want me to to run a lead from the modem into the network port on my PC? If you did mean that, then I still can't get on to the internet. The modem hasn't got a make written on it. It was free from NTL. On my connection it says modem 351000 if that helps. Sorry if I am not being very helpful. |
Re: Wireless Router Problem
OK, until such time as you can browse to the internet using an ethernet lead only direct between the PC and modem, forget trying to use the router. Something else (maybe additional) to the router is wrong.
We must get the network port on your computer running first. In Windows Control Panel, (classic view) > system > pop up window > hardware > device manager, please confirm that there are no red crosses or yellow exclamation marks against any item. If there are you need to fix that by loading the drivers for the missing bit's of hardware. From Control panel > network connections, is the status of your ethernet card showing "enabled" (you can change it by right clicking). Assuming yes, then right click the connection, select properties. Internet Protocol (TCP/IP) should be ticked. Select that and click properties. Make sure both options of obtain an IP address automatically and DNS automatically are selected. Click OK to shut all down. In Internet Explorer menus select Tools > options > connections. Make sure never dial a connection is ticked. Lan Settings should have nothing selected. Now power off the modem and computer. Pull your USB connection from computer and modem. Connect only an ethernet lead between the modem and network port of the computer. Power on modem let settle, power computer. If you can't get a connection now, try an alternate ethernet lead. If that won't work then I have to start suspecting something odd with your modem, and that might need you to be phoning the expensive Virgin Media support line. |
Re: Wireless Router Problem
dombey, leave the modem off for 5 minutes, connect the pc to the modem and then boot up the modem.
normally this should give you in worse case scenario a 192.168.100.* IP address on the router page, if you dont get that but say a 169.254.*.* address I would check the lan connection on the pc. |
Re: Wireless Router Problem
Quote:
Hi When I go into Network connections, there are two local area connections. One is my cable modem and the second is the network card which has a red cross. There are also two computers on my tool bar with a red cross on, which says I have a cable unplugged. I am starting to suspect it may be the modem playing up. I have no problem with a USB connection though. |
Re: Wireless Router Problem
Dombey, if you connect just the router to the pc do you get a 192.168.*.* ip address then? if so then yes it could be that the ethernet port on the modem if faulty, if not that its the lan card on the pc that could be faulty.
both those cases would be very rare indeed in my book (I used to work for a large-ish networking company) |
Re: Wireless Router Problem
Quote:
Are you asking me to just connect the router to the network port? And where would I get the IP address from? Sorry, but it is getting late. :-) |
Re: Wireless Router Problem
Quote:
right click the double computer symbol (or go into network connections and right click) you should get an option for status - select Support tab will show you the IP. That you have a red cross indicated by your earlier post says to me the network card has no connection whatsoever. Can you confirm you've done absolutely everything suggested in my post, especially stuff with drivers for the network card. You can even try uninstalling the network card drivers and reinstall, sometimes that does it. |
Re: Wireless Router Problem
I have done everything you asked.
The local area connection definitely has a red cross, and like I said it is saying I have a cable unplugged. Even after I have removed the cable from the modem and the network card. ?? I will reinstall the driver and try again. Thanks for bearing with me. ---------- Post added at 01:33 ---------- Previous post was at 01:12 ---------- I have re-installed the driver for the network card and it still has a red cross on it. does it mean the network card is faulty? Thanks for all your help. I will hopefully catch up with you over the weekend. |
Re: Wireless Router Problem
Does everything work if you plug the cable directly from the modem to the network card in your PC? (After restarting the equipment of course)
|
Re: Wireless Router Problem
Dombey, have you got another network cable, could be a dodgy cable that you got there mate.
|
Re: Wireless Router Problem
Just wondering if you are using a crossover cable by mistake.
If you look at the plug with the cable towards you and the copper pins uppermost a straight cable should be: (at both ends) 1-org/wht 2-org 3-grn/wht 4-blu 5-blu/wht 6-grn 7-wht/brn 8-brn if it's a crossover one end will have 1&2 crossed with 3&6 ie the orange wires crossed with the green wires. Sorry if i'm explaining egg sucking etc. |
Re: Wireless Router Problem
Right, based on the fact you could browse to the router's admin panel 192.168.1.1 when that was a wired connection, but you cannot get a wired connection direct between the PC and modem, and assuming you have tried two separate ethernet cables, there is nothing else to blame other than the modem. Time to call Tech Support for a replacement.
|
Re: Wireless Router Problem
Quote:
One thing is U have not mentioned about U R ISP, U should mention whether Ur Using ADSL or Cabel Broadband Connection.. k.. I will give u steps for both.. This step is For ADSL Connection, where internet comes from telephone service.. and i assume ur Dynamode router have modem+router 1. Remove the old modem, remove completely USB cabel.. 2. Do the physical connection , connect every thing and check the adsl or tel light should be lit up. 3. Configure the router, using ur BB username and password.. and all the info by taking from ISP. This step is For CABEL Connection, where internet comes from cable line.. and i assume ur Dynamode router is just router, not modem in built. 1. Connect the CABEL modem directly to computer with Ethernet cable..( not with USB cable,completely remove the USB Cable from the modem and as well as from computer).. if ur abel to go online..u can proceed further to next steps..if not, call our ISP and enable the Ethernet port on the CABEL modem.. once its done..once ur able to go online..proceed to next stpes 2. Connect Cabel modem to wan port and computer to LAN port.. 3. Open the configuration page by 192.168.1.1.. 4. Configure according to connection type provided by isp..( for cable it will be usually DYNAMIC ) , and u have to clone the MAC add of cable modem.. 4. u will be connected and u will be able to go online.. if not 5. Unplug the power cable for the router first and then modem.. 6. wait for 30 seconds and put the power cable back to modem and after 30 seconds put the power to router.. router will connect and able to go online 7. If still cant Call Technical Support of dynamode.. Thank you and regards Vivek N |
Re: Wireless Router Problem
Please do not use text speak.
|
Re: Wireless Router Problem
Just a quick update.
Nothing I tried worked, so I had no choice other than to phone the Tech line. They were very helpful, and seem to think I have a faulty Modem. (they are sending me a replacement). Many thanks for all your help. |
All times are GMT +1. The time now is 18:45. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum