Virgin Modem Login

Zee · 04-03-2010, 17:42

How do i log-in to the modem? so i can check what speed i am on, because i think they have downgraded my account to 10Mb it seems.

moaningmags · 04-03-2010, 17:49

http://192.168.100.1 username/password if required is root/root

Zee · 04-03-2010, 17:51

Quote:

Originally Posted by moaningmags

http://192.168.100.1 username/password if required is root/root

Thanks, but it isn't working

Peter_ · 04-03-2010, 18:02

If it is a new Cisco Scientific Atlanta Webstar EPC2100 then try this below.

http://192.168.100.1/_aslvl.asp

Change access level to 2
Password: W2402

You should get a message saying login successful. You should then be able to access those screens for a couple of minutes before they lock again.

Zee · 04-03-2010, 18:09

Quote:

Originally Posted by Moldova

If it is a new Cisco Scientific Atlanta Webstar EPC2100 then try this below.

http://192.168.100.1/_aslvl.asp

Change access level to 2
Password: W2402

You should get a message saying login successful. You should then be able to access those screens for a couple of minutes before they lock again.

That isn't working either. My modem is the blue ntl branded one. i think its ambit 250 or something like that

Peter_ · 04-03-2010, 18:15

Quote:

Originally Posted by Zee

That isn't working either. My modem is the blue ntl branded one. i think its ambit 250 or something like that

If you are behind a router then you will need to connect direct and reboot the modem and then use Mags advice above.

Zee · 04-03-2010, 18:16

Quote:

Originally Posted by Moldova

If you are behind a router then you will need to connect direct and reboot the modem and then use Mags advice above.

yes im behind a router, i'll try it. thanks.

Graham M · 04-03-2010, 18:35

Quote:

Originally Posted by Moldova

If you are behind a router then you will need to connect direct and reboot the modem and then use Mags advice above.

Works for me without connecting direct?

Peter_ · 04-03-2010, 21:20

Quote:

Originally Posted by Graham M

Works for me without connecting direct?

Oddly it does not for everyone and we then have to ask them to connect direct to the modem.

AbyssUnderground · 04-03-2010, 22:55

Normally only doesn't work when using a proxy or the router is on the same LAN IP as the modem (rare). Still the easiest workaround is to connect direct to the modem as stated

Rik · 04-03-2010, 22:59

It may be a problem with your Flux Capacitor

Peter_ · 05-03-2010, 08:01

Quote:

Originally Posted by AbyssUnderground

Normally only doesn't work when using a proxy or the router is on the same LAN IP as the modem (rare). Still the easiest workaround is to connect direct to the modem as stated

If it is a 3rd party router and we cannot get them to access the configs then we always ask for a direct connection as we do not know how they may have set up their router.

Kymmy · 05-03-2010, 10:41

Quote:

Originally Posted by Zee

That isn't working either. My modem is the blue ntl branded one. i think its ambit 250 or something like that

Do you get to any screen or a page not found error (i.e.. does it ask for your username/password?)

Zee · 06-03-2010, 12:04

Quote:

Originally Posted by AbyssUnderground

Normally only doesn't work when using a proxy or the router is on the same LAN IP as the modem (rare). Still the easiest workaround is to connect direct to the modem as stated

Thanks! It was because i was using one of Virgin Media's proxys which i forgot i was using. i've disabled it now and im able to access that page fine now. thank you

Thanks for the help everyone else.