350M Win 10 Speed slow

copernob · 08-01-2019, 01:30

Why is my Windows 10 slow. My Speed is Half of my Win7 pc which is 381down Around 152 on Win 10...

djfunkdup · 08-01-2019, 02:25

Windows 10 here and i don't get that issue .

pip08456 · 08-01-2019, 03:11

Quote:

Originally Posted by copernob

Why is my Windows 10 slow. My Speed is Half of my Win7 pc which is 381down Around 152 on Win 10...

I've given W10 a short chance in the past but never saw a speed issue. Don't know what it would be like now with the updates it's had.

Don't care, once support for Win 7 ends I'm off to Linux.

General Maximus · 08-01-2019, 07:56

Quote:

Originally Posted by pip08456

Don't care, once support for Win 7 ends I'm off to Linux.

hopefully by then Windows 11 will be out and it will be more like Windows 7.

Quote:

Originally Posted by copernob

Around 152 on Win 10...

It may be a coincidence. Have you checked the config on the shub because 152 is what I was provisioned for when I was on 120mbits back in the days of yore.

BenMcr · 08-01-2019, 11:41

Quote:

Originally Posted by General Maximus

hopefully by then Windows 11 will be out and it will be more like Windows 7.

All updates are going to be off the Windows 10 codebase now in the same way as Office 365 works.

There isn't going to be a Windows 11

Taf · 08-01-2019, 12:05

With no programs running that would use the internet, check too see if Win 10 is downloading anything.

My daughter's connection (and all others on the home network) got very slow and I checked and found her Win10 was hammering the connection doing downloads in the background.

copernob · 08-01-2019, 17:43

Can't find the problem..both PCs show in the Router. All looks Ok. Will look again later. No Downloads in background. All configured for Downloads...

General Maximus---What n where is this Config in Shrub3 ?

Cheers All
Happy New Year

pip08456 · 08-01-2019, 18:55

Quote:

Originally Posted by copernob

Can't find the problem..both PCs show in the Router. All looks Ok. Will look again later. No Downloads in background. All configured for Downloads...

General Maximus---What n where is this Config in Shrub3 ?

Cheers All
Happy New Year

Click on Check router status at the bottom of login page, then config tab.

General Maximus · 08-01-2019, 19:07

copernob · 10-01-2019, 08:11

I get this---
Network access
Allowed
Maximum Number of CPEs
1
Baseline Privacy
Enabled
DOCSIS Mode
Docsis30
Config file
cmreg-vmdg505-rtsxxl35016u-b.cm

Primary Downstream Service Flow
SFID 2791099
Max Traffic Rate 402500000
Max Traffic Burst 42600
Min Traffic Rate 0

Primary Upstream Service Flow
SFID 2791098
Max Traffic Rate 22010000
Max Traffic Burst 42600
Min Traffic Rate 0
Max Concatenated Burst 16320
Scheduling Type BestEffort

---------- Post added at 08:11 ---------- Previous post was at 08:08 ----------

For Network log I keep getting this of which has been for months---
2019-01-10 07:04:16.00 Error DHCP RENEW sent - No response for IPv4;CM-MAC=40:0d:10:00:98:0b;CMTS-MAC=00:01:5c:7a:82:55;CM-QOS=1.1;CM-VER=3.0;
2019-01-10 07:49:58.00 critical No Ranging Response received - T3 time-out;CM-MAC=40:0d:10:00:98:0b;CMTS-MAC=00:01:5c:7a:82:55;CM-QOS=1.1;CM-VER=3.0;

General Maximus · 10-01-2019, 08:37

Quote:

Originally Posted by copernob

Primary Downstream Service Flow
Max Traffic Rate 402500000

Primary Upstream Service Flow
Max Traffic Rate 22010000

that means you are provisioned for 400mbits down and 22 up which is correct. Are you doing your speed tests on speedtest.net?

copernob · 15-01-2019, 03:06

No I use OOKLA...Just realized speedtest is ookla. Sorry.

Ping ms
13
Download Mbps
384.32
Upload Mbps
21.19
ABOVE is Win 7 pro.

Below is Win 10
Ping ms
14
Download Mbps
201.08
Upload Mbps
21.26

SnoopZ · 15-01-2019, 10:32

Not sure if this has been asked.

I assume all tests are ethernet(wired) as they need to be?

Are you using the same browsers on both Windows 7 and 10?

Are you using 2 PCs 1 with 7 and 1 with 10 on or are the windows 7 tests really old?

Which Browser do you currently use, and try other browsers?

I suspect there are settings/driver issues with your Ethernet adapter on Windows 10 compared to Windows 7 if you still have problems after reading this thread, where the guy changed his adapter to get around a similar problem, hopefully you won't have to do that.

https://answers.microsoft.com/en-us/...c-765b3a8fe4d2

copernob · 16-01-2019, 12:10

Hi Snoopz----Firefox on both PCs and I have Chrome on both as well...Same add ons in firefox..Both on cat 6 cable through a gigabyte 8 switch box..

For the last two nights from around 1:00am my Shrub3 has been flickering the Wireless & power on for hours. The Wireless is still flickering on the shrub3. been like it all day. I not touched it at moment...Wondering if I been hacked (because of the Ransomeware I had) or if Virgin has a problem, or my shrub has a problem. Internet working. Power plugs working. (tp-link & netgear) I switched off my NAS Sharecenter at moment until I satisfied with everything else. That I might have to reset as it rejects my password on PCs and Phone & tablet... THANKs for the Help. 2019 not good to me at moment..

SnoopZ · 16-01-2019, 12:13

All i can suggest is try plugging the Hub3 direct in router mode to the windows 10 pc without your router or switch and turn everything off and on again and and if that fixes it then you know the issue isnt windows 10.

Also check all drivers for the ethernet card etc failing that i think you will have to Google as i am out of ideas.