17-07-2020, 09:01
|
#31
|
cf.geek
Join Date: Apr 2008
Services: V6 with Full-House/Maxit Sports & Movies, 100Mb broadband, Talk Weekends.
Posts: 570
|
Re: New box on Saturday
Quote:
Originally Posted by ozsat
Are you using the VM SuperHub or your own router with a different DNS?
|
I'm using the VM SuperHub in modem mode, my own Netgear router but with default DNS settings. The program graphics work fine on the discovery bar, and in the panel - it's literally just the channel graphic on recorded programs.
Another poster mentioned the PQ, we'd also agree something is better. Our TV maxes at 1080p, but the old TiVo only went upto 1080i. If I use the auto-setup, the box ticks 720p, 1080i & 1080p. But it seems to work well with only 1080p ticked.
Live TV is presumably upscaled from 1080i to 1080p, and pictures do seem slightly sharper & clearer. I think even SD looks a little better.
HD-VOD happily streams at 1080p and is hard to tell from live TV. Similar for iPlayer.
|
|
|
17-07-2020, 11:47
|
#32
|
cf.mega poster
Join Date: Nov 2003
Location: Oxford (area 31)
Services: 1.2Gb/100Mb, VMTV (UHD), Freesat HD, Freeview HD, SkyQ (UHD), BTtv (UHD), DAB+
Posts: 1,869
|
Re: New box on Saturday
It may be worth checking the router DNS still. I tried changing my router to use a faster DNS.
Operation of TiVo was fine except for the misising channels icons.
In the end I used the VM DMS on the router and use DNS settings on the required devices.
DNS for VM should be 194.168.4.100 and 194.168.8.100
I think the best output settings for your tv would be both 1080p and 1080p passthru set on.
|
|
|
17-07-2020, 12:03
|
#33
|
cf.geek
Join Date: Apr 2008
Services: V6 with Full-House/Maxit Sports & Movies, 100Mb broadband, Talk Weekends.
Posts: 570
|
Re: New box on Saturday
Quote:
Originally Posted by ozsat
It may be worth checking the router DNS still. I tried changing my router to use a faster DNS.
Operation of TiVo was fine except for the misising channels icons.
In the end I used the VM DMS on the router and use DNS settings on the required devices.
DNS for VM should be 194.168.4.100 and 194.168.8.100
I think the best output settings for your tv would be both 1080p and 1080p passthru set on.
|
It's a good point.. the router is set to "get DNS automatically", but primary & secondary are set to VM ones (I've not done this) but are greyed out. So, as best I can tell, the only other tweak would be to forcibly set what's already happening anyway.
Thanks for the pointer re the passthru, that's something else to try!
|
|
|
17-07-2020, 13:28
|
#34
|
cf.mega poster
Join Date: Nov 2003
Location: Oxford (area 31)
Services: 1.2Gb/100Mb, VMTV (UHD), Freesat HD, Freeview HD, SkyQ (UHD), BTtv (UHD), DAB+
Posts: 1,869
|
Re: New box on Saturday
May be worth checking the secruity settings on the router. Maybe a port is blocked which doesn't need to be.
---------- Post added at 13:28 ---------- Previous post was at 13:11 ----------
Something else worth a try to prove the issue - connect the V6 to the SH3 in router mode and do two network callbacks.
This may prove where the issue lies.
|
|
|
17-07-2020, 13:57
|
#35
|
Virgin Media Staff
Join Date: Nov 2006
Location: Manchester
Services: 360 x2, Maxit TV, Sky Sports and Sky Cinema. Gig1
Posts: 17,929
|
Re: New box on Saturday
I'm sure Spiderplant has said in the past that some features of the V6 only play well with the Virgin Media DNS servers.
If you route out via a 3rd party DNS then that breaks the 'internal' chain of connections to the VM network.
__________________
I work for Virgin Media but all views are my own.
|
|
|
17-07-2020, 14:49
|
#36
|
cf.mega poster
Join Date: Nov 2003
Location: Oxford (area 31)
Services: 1.2Gb/100Mb, VMTV (UHD), Freesat HD, Freeview HD, SkyQ (UHD), BTtv (UHD), DAB+
Posts: 1,869
|
Re: New box on Saturday
He did - but the user says they have not changed away from the default DNS - so something else is blocking the chain.
Quote:
Originally Posted by BenMcr
I'm sure Spiderplant has said in the past that some features of the V6 only play well with the Virgin Media DNS servers.
If you route out via a 3rd party DNS then that breaks the 'internal' chain of connections to the VM network.
|
|
|
|
18-07-2020, 10:31
|
#37
|
cf.geek
Join Date: Apr 2008
Services: V6 with Full-House/Maxit Sports & Movies, 100Mb broadband, Talk Weekends.
Posts: 570
|
Re: New box on Saturday
Quote:
Originally Posted by ozsat
May be worth checking the secruity settings on the router. Maybe a port is blocked which doesn't need to be.
---------- Post added at 13:28 ---------- Previous post was at 13:11 ----------
Something else worth a try to prove the issue - connect the V6 to the SH3 in router mode and do two network callbacks.
This may prove where the issue lies.
|
Eureka!!
Disabled the modem mode, moved the V6 Ethernet to the SH3 and immediately on calling back, the channel logos appeared.
Re-enabled modem mode and swapped the cables back, VOD & callbacks work (thus proving the connection), but the logos disappear from recorded programs.
|
|
|
18-07-2020, 10:46
|
#38
|
cf.mega poster
Join Date: Jun 2003
Posts: 8,901
|
Re: New box on Saturday
I agree that sounds like a blocked port. But I don't know which one it requires. The built-in Port Configuration Test won't help much as it's designed for US TiVos and often fails even on a fully-working setup.
This page may give you some clues, but again it is intended for the US market and isn't necessarily correct for VM boxes:
https://support.tivo.com/articles/Tr...ng-my-TiVo-DVR
|
|
|
20-07-2020, 15:27
|
#39
|
cf.geek
Join Date: Apr 2008
Services: V6 with Full-House/Maxit Sports & Movies, 100Mb broadband, Talk Weekends.
Posts: 570
|
Re: New box on Saturday
Quote:
Originally Posted by spiderplant
I agree that sounds like a blocked port. But I don't know which one it requires. The built-in Port Configuration Test won't help much as it's designed for US TiVos and often fails even on a fully-working setup.
This page may give you some clues, but again it is intended for the US market and isn't necessarily correct for VM boxes:
https://support.tivo.com/articles/Tr...ng-my-TiVo-DVR
|
After a few pokes and prods, it's starting to look like my "no channel logos in my shows" issue is something queer with my Netgear (WNDR3700) router.
It's going a bit beyond my area of expertise, but I'm pretty sure I've "unblocked" all the relevant and required ports - but alas still the same unless I disable modem mode and connect V6 to the SH3 directly.
Oh well.
|
|
|
20-07-2020, 16:21
|
#40
|
Rise above the players
Join Date: Mar 2008
Location: Wokingham
Services: 2 V6 boxes with 360 software, Now, ITVX, Amazon, Netflix, Lionsgate+, Apple+, Disney+, Paramount +,
Posts: 14,589
|
Re: New box on Saturday
Quote:
Originally Posted by japitts
After a few pokes and prods, it's starting to look like my "no channel logos in my shows" issue is something queer with my Netgear (WNDR3700) router.
It's going a bit beyond my area of expertise, but I'm pretty sure I've "unblocked" all the relevant and required ports - but alas still the same unless I disable modem mode and connect V6 to the SH3 directly.
Oh well.
|
Yes, that's probably the right answer.
|
|
|
20-07-2020, 18:49
|
#41
|
cf.geek
Join Date: Apr 2008
Services: V6 with Full-House/Maxit Sports & Movies, 100Mb broadband, Talk Weekends.
Posts: 570
|
Re: New box on Saturday
Quote:
Originally Posted by OLD BOY
Yes, that's probably the right answer.
|
It would be the "politically correct" answer, indeed.
I'm still not 100% convinced my attempt at "port unblocking" (probably the wrong teminology) has worked. I've got a pretty good list of the ports that need checking.
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT +1. The time now is 17:35.
|