4 upstream channel bonding - post here
04-05-2018, 20:34
|
#31
|
cf.addict
Join Date: Nov 2010
Location: North West
Services: Ultimate Volt
Posts: 168
|
Re: 4 upstream channel bonding - post here
I don't usually check my network status, but after reading this thread I thought I would.When I checked it yesterday, I only had one upstream channel, I did a reboot and found I now have 4 .Living in the Blackburn area.
Upstream Channels Lock Status Channel ID Frequency Modulation Tx Power Mode Channel Bandwidth Symbol Rate
Locked 4 25800000 Hz ATDMA 49.5 dBmV 64QAM 6400000 Hz 5120 Ksym/sec
Locked 2 39400000 Hz ATDMA 49.5 dBmV 64QAM 6400000 Hz 5120 Ksym/sec
Locked 1 46200000 Hz ATDMA 48.5 dBmV 64QAM 6400000 Hz 5120 Ksym/sec
Locked 3 32600000 Hz ATDMA 49.3 dBmV 64QAM 6400000 Hz 5120 Ksym/sec
|
|
|
04-05-2018, 20:54
|
#32
|
Ran Away
Join Date: Nov 2008
Location: Lincoln
Services: phone + 1gbit BB + SkyQ
Posts: 11,021
|
Re: 4 upstream channel bonding - post here
You should never have 1 upstream and everyone should be on a minimum of 2. I was going to put it down to you misreading the stats but i think it has got something to do with your power levels. If they creep above you are going to start having problems and would explain why you can only only see 1 channel. Keep your eye on it.
|
|
|
04-05-2018, 22:12
|
#33
|
cf.addict
Join Date: Nov 2010
Location: North West
Services: Ultimate Volt
Posts: 168
|
Re: 4 upstream channel bonding - post here
Thanks for that GM, and I will keep an eye on them.
|
|
|
04-05-2018, 22:48
|
#34
|
Ran Away
Join Date: Nov 2008
Location: Lincoln
Services: phone + 1gbit BB + SkyQ
Posts: 11,021
|
Re: 4 upstream channel bonding - post here
If the power levels get too high it becomes unstable, you will drop your connection while the interface resets that will be when you only lock onto one upstream because the levels are out whack. Either that or it is so bad you wont lock onto any at all at which point it will start all over again. Are you getting any t3 or t4 timeouts?
|
|
|
05-05-2018, 16:10
|
#35
|
cf.addict
Join Date: Nov 2010
Location: North West
Services: Ultimate Volt
Posts: 168
|
Re: 4 upstream channel bonding - post here
Is it possible for the upstream to fluctuate between 1 & 4 channels? I have googled what you mentioned regarding t3 and t4 timeouts, but still none the wiser. I don't have any problems with my broadband speeds or connection problems as far as I know.I have noticed my power levels are slightly higher than yesterday.
Upstream Channels
Lock Status Channel ID Frequency Modulation Tx Power Mode Channel Bandwidth Symbol Rate
Locked 4 25800000 Hz ATDMA 49.8 dBmV 64QAM 6400000 Hz 5120 Ksym/sec
Locked 2 39400000 Hz ATDMA 50.0 dBmV 64QAM 6400000 Hz 5120 Ksym/sec
Locked 1 46200000 Hz ATDMA 48.5 dBmV 64QAM 6400000 Hz 5120 Ksym/sec
Locked 3 32600000 Hz ATDMA 49.3 dBmV 64QAM 6400000 Hz 5120 Ksym/sec
|
|
|
05-05-2018, 16:47
|
#36
|
Ran Away
Join Date: Nov 2008
Location: Lincoln
Services: phone + 1gbit BB + SkyQ
Posts: 11,021
|
Re: 4 upstream channel bonding - post here
Quote:
Originally Posted by trublue
Is it possible for the upstream to fluctuate between 1 & 4 channels?
|
Nope, it has been about 15 years since people were on one upstream channel. You should be on at least two and most people are on three or four. They operate in what are called "bonding groups" up to a maximum of 4 channels. If 4 channels are available to your area then you use all 4 channels all the time, not some random number up to 4.
Quote:
Originally Posted by trublue
I have googled what you mentioned regarding t3 and t4 timeouts, but still none the wiser.
|
I wasn't trying to confuse you. Which shub have you got? There should be a table similar to your power levels under the same upstream tab which tell you how many T1, T2, T3 and T4 timeouts you have, ideally it should be 0. As an example, if you have got a shub 3 it will look like this:
|
|
|
05-05-2018, 18:33
|
#37
|
CF Resident Dog
Join Date: Mar 2005
Posts: 14,254
|
Re: 4 upstream channel bonding - post here
Has it really been 15 years since only 1 upstream? Surely that is not right?
__________________
PSN: Snoopzster
|
|
|
05-05-2018, 18:46
|
#38
|
cf.addict
Join Date: Nov 2010
Location: North West
Services: Ultimate Volt
Posts: 168
|
Re: 4 upstream channel bonding - post here
I know you weren't trying to confuse me, I'm just a little thick I am on shub 2, the only info I found on time outs was this
Modem Initialisation
Stage Status
Downstream Acquisition Locked
Primary Frequency 266750000 Hz
DHCP Done
TFTP Done
Time Of Day 18:36:07 BST
Security BPI+
Counters T1,T2,T3,T4,Sync,Resets 000,000,000,000,000,000
|
|
|
05-05-2018, 20:01
|
#39
|
Ran Away
Join Date: Nov 2008
Location: Lincoln
Services: phone + 1gbit BB + SkyQ
Posts: 11,021
|
Re: 4 upstream channel bonding - post here
Quote:
Originally Posted by SnoopZ
Has it really been 15 years since only 1 upstream? Surely that is not right?
|
fair enough, more like 12 years because I can remember having one upstream on my ambit 256
Quote:
Originally Posted by trublue
I am on shub 2, the only info I found on time outs was this
Counters T1,T2,T3,T4,Sync,Resets 000,000,000,000,000,000
|
that's cool, no T3 or T4 timeouts which is good. Apart from that reboot you did have you been experiencing any connectivity issues/drop outs or has everything been okay as far as you are aware?
|
|
|
05-05-2018, 20:47
|
#40
|
CF Resident Dog
Join Date: Mar 2005
Posts: 14,254
|
Re: 4 upstream channel bonding - post here
I was thinking it was like 5years since we went to 2 upstreams but I can't find any info on it, just shocked it has been that many years since we all went to 2.
Anyone know for sure?
__________________
PSN: Snoopzster
|
|
|
05-05-2018, 21:08
|
#41
|
Ran Away
Join Date: Nov 2008
Location: Lincoln
Services: phone + 1gbit BB + SkyQ
Posts: 11,021
|
Re: 4 upstream channel bonding - post here
Quote:
Originally Posted by SnoopZ
I was thinking it was like 5years since we went to 2 upstreams
|
Na, i had 2 upstreams on my ambit 300 and that was back in 2009 at least.
|
|
|
05-05-2018, 22:38
|
#42
|
cf.addict
Join Date: Nov 2010
Location: North West
Services: Ultimate Volt
Posts: 168
|
Re: 4 upstream channel bonding - post here
I did lose my connection last week for a minute or so, I just put it down to my VPN playing up. Thanks again for taking the time to answer my queries, much appreciated.
|
|
|
06-05-2018, 10:35
|
#43
|
Ran Away
Join Date: Nov 2008
Location: Lincoln
Services: phone + 1gbit BB + SkyQ
Posts: 11,021
|
Re: 4 upstream channel bonding - post here
np, if you power levels go above 50 or you start experiencing drop outs you need to give VM a ring on 150 and a tech to come out and fix it. As an fyi we haven't discussed your downstream power levels but anything between -7 and +7 is ok and they want to be as close to 0 as possible. Around 0 and +3 is awesome.
|
|
|
06-05-2018, 13:53
|
#44
|
cf.addict
Join Date: Nov 2010
Location: North West
Services: Ultimate Volt
Posts: 168
|
Re: 4 upstream channel bonding - post here
My downstream channels are averaging around +2.3 so no problem there. Upstream seems to be consistent at between 49.5 for 3 channels with one at 50, so I will keep an eye on these and for drop outs.
|
|
|
06-05-2018, 14:15
|
#45
|
Perfect Soldier
Join Date: Mar 2009
Location: Worthing West Sussex
Age: 66
Services: VM 500M SH3 thingy
in modem mode
XL TV V6 Sony Bravia smart TV and M phone
Posts: 10,989
|
Re: 4 upstream channel bonding - post here
If you've not already done it set up a BQM monitor at thinkbroadband. If you start seeing packet loss or increasing latency then it's onto VM to get it fixed.
__________________
History is much like an endless waltz: The three beats of war, peace and revolution continue on forever.
However history will change with my coronation - Mariemaia Khushrenada
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT +1. The time now is 12:54.
|