Quote:
Originally Posted by Sephiroth
The high upstream power shown in the stats was what led me to the possible deduction. So I asked Blair to see if the power was ramping.
Incidentally for Blair, the T3 count is best obtained IMO by using the stats from the ROUTER STATUS link at the top right of the GUI screen rather than logging into the GUI.
|
Where do I get them?
---------- Post added at 07:27 ---------- Previous post was at 07:12 ----------
T3 Count via Router Status:
US-1 US-2 US-3 US-4
Channel Type 2.0 2.0 N/A N/A
Channel ID 4 5 N/A N/A
Frequency (Hz) 37600000 Hz 31000000 Hz N/A N/A
Ranging Status Success Success N/A N/A
Modulation QAM16 QAM16 N/A N/A
Symbol Rate (Sym/sec) 5120000 5120000 N/A N/A
Mini-Slot Size 128 128 N/A N/A
Power Level (dBmV) 51.3 dBmV 52.5 dBmV N/A N/A
T1 Timeouts 0 0 N/A N/A
T2 Timeouts 0 0 N/A N/A
T3 Timeouts 0 0 N/A N/A
T4 Timeouts 0 0 N/A N/A
Upstream Burst Req
(1) Init Maint
(3) Per Maint
(4) Adv Short
(9) Adv Long
(10) Adv UGS
(11)
Modulation Type 16QAM 16QAM 16QAM 16QAM 16QAM 16QAM
Differential Encoding Off Off Off Off Off Off
Preamble Length 36 384 384 64 64 64
Preamble Value Offset 396 6 6 396 396 396
FEC Error Correction (T) 0 5 5 6 8 8
FEC Codeword Information Bytes (K) 16 34 34 76 231 236
Maximum Burst Size 0 0 0 4 0 26
Guard Time Size 22 48 48 22 22 22
Last Codeword Length Fixed Fixed Fixed Short Short Short
Scrambler On/Off On On On On On On
Network Log First Time Last Time Priority Error Number Description
30/10/2014 22:28:32 30/10/2014 22:28:32 Critical (3) 82000400 Received Response to Broadcast Maintenance Request, But no Unicast Maintenance opportunities received - T4 time out;CM-MAC=4c:60:de:1c:c1:60;CMTS-MAC=00:21:d8:d1:8c:43;CM-QOS=1.1;CM-VER=3.0;
T3 Status from Logging into the GUI:
Modem Initialisation Stage Status
Downstream Acquisition Locked
Primary Frequency 299000000 Hz
DHCP Complete
TFTP Complete
Time Of Day 07:25:53
Security Enabled
Counters T1,T2,T3,T4,Sync,Resets 0, 0, 0, 0, 0, 0