17-04-2010, 15:39
|
#391
|
|
Inactive
Join Date: Jun 2003
Location: Abertawe
Services: 10Mb BB, DTV & Phone
Posts: 2,859
|
Re: CF: Clickers Corner
Quote:
Originally Posted by Halcyon
Aghhhhh !!!!
Thanks for the info about the new model......I'm not sure what to do now.
So this newer one would have more pixels, greater ISO, more focus points and a few extras.
What to do ? I wonder if it will be a lot more expensive over the D90?
|
I don't think it'll have more pixels, 12 megapixel is about right for the APS-C sensor. More than that and you lose overall sensitivity because the photo-sites are smaller. I'm thinking that they'll upgrade the electronics to give you more focus points and better low light ability, maybe higher than 3200 ISO. Probably the movie mode will be better as the D90 was the first time Nikon added a movie mode. More than that and the cost will go up more in line with the D300 and D700 perhaps.
If it were me, I'd buy the D90 now unless you are going to want to use the movie mode for more than the occasional clip.
You can find examples of the video on my YouTube page and photo's on my Flickr page.
http://www.flickr.com/photos/7944055@N08/
http://www.youtube.com/user/TheOldFolkie
|
|
|
17-04-2010, 18:05
|
#392
|
|
Hello !
Join Date: Mar 2004
Location: Somewhere
Services: AppleTV, Netflix
Posts: 16,803
|
Re: CF: Clickers Corner
Delta, thankyou for your great help  You have convinced me. Im going for the D90.
The other good thing is that Nikon are doing £60 cash back til the end of the month which is good.
I don't really need a movie function so am not too bothered over movie quality.
The fact this camera has a good track record is making me want it now.
Off to the shops I go tommorow then.
|
|
|
17-04-2010, 18:33
|
#393
|
|
Inactive
Join Date: Jun 2003
Location: Abertawe
Services: 10Mb BB, DTV & Phone
Posts: 2,859
|
Re: CF: Clickers Corner
Quote:
Originally Posted by Halcyon
Delta, thankyou for your great help  You have convinced me. Im going for the D90.
The other good thing is that Nikon are doing £60 cash back til the end of the month which is good.
I don't really need a movie function so am not too bothered over movie quality.
The fact this camera has a good track record is making me want it now.
Off to the shops I go tommorow then. 
|
Eeek! such responsibility.
I know you'll love it. I expect to see some photo's ASAP.
|
|
|
19-04-2010, 17:33
|
#394
|
|
Hello !
Join Date: Mar 2004
Location: Somewhere
Services: AppleTV, Netflix
Posts: 16,803
|
Re: CF: Clickers Corner
Done! I'm now the owner of a lovely Nikon D90 and now in debt...again.
Why are gadgets so addictive!!!
I have no clue what to do at the moment so firstly will read the manual.
I feel like I'm going to break it. I hope not.
|
|
|
19-04-2010, 18:12
|
#395
|
|
Inactive
Join Date: Jun 2003
Location: Abertawe
Services: 10Mb BB, DTV & Phone
Posts: 2,859
|
Re: CF: Clickers Corner
Quote:
Originally Posted by Halcyon
Done! I'm now the owner of a lovely Nikon D90 and now in debt...again.
Why are gadgets so addictive!!!
I have no clue what to do at the moment so firstly will read the manual.
I feel like I'm going to break it. I hope not.
|
You can download the manual as a pdf from Nikon once you register the camera, I found it useful to have a copy on the computer.
http://www.europe-nikon.com/en_GB/
Get snapping!!
|
|
|
19-04-2010, 18:18
|
#396
|
|
Hello !
Join Date: Mar 2004
Location: Somewhere
Services: AppleTV, Netflix
Posts: 16,803
|
Re: CF: Clickers Corner
Thankyou!...... Im charging the battery now. The thing I'm worried about is connecting the lens up wrongly. But I'l make sure I follow the instructions carefully.
|
|
|
19-04-2010, 18:52
|
#397
|
|
Inactive
Join Date: Jun 2003
Location: Abertawe
Services: 10Mb BB, DTV & Phone
Posts: 2,859
|
Re: CF: Clickers Corner
Quote:
Originally Posted by Halcyon
Thankyou!...... Im charging the battery now. The thing I'm worried about is connecting the lens up wrongly. But I'l make sure I follow the instructions carefully.
|
There's a white dot on the camera body just above the lens release button. Line the white dot on the 18mm-105mm lens up with it, locate the lens into the body of the camera and turn the lens to the left until it locks (if your holding the body with the LCD facing away from you).
|
|
|
19-04-2010, 23:14
|
#398
|
|
Hello !
Join Date: Mar 2004
Location: Somewhere
Services: AppleTV, Netflix
Posts: 16,803
|
Re: CF: Clickers Corner
Thanks Delta.
I've got the lens all set up and have taken my first photo just round my bedroom.
I was surprised at how crisp the image turned out and this is indoors with the flash.
I can't wait to get outdoors.
I've currently got a bag that came with it but it is good enough for the lenses and won't fit the camera unless I remove the lens.
What do you use when taking your camera out with you for storage?
Thanks again.
|
|
|
19-04-2010, 23:56
|
#399
|
|
Guest
|
Re: CF: Clickers Corner
i would remove the lens as few times as possible as thats when the crud gets in. I assume the ccd shakes itself to remove dust and crud though?
I bought quite a large camera bag from argos a few years ago that would take it complete
|
|
|
|
20-04-2010, 07:41
|
#400
|
|
Inactive
Join Date: Jun 2003
Location: Abertawe
Services: 10Mb BB, DTV & Phone
Posts: 2,859
|
Re: CF: Clickers Corner
Quote:
Originally Posted by Halcyon
Thanks Delta.
I've got the lens all set up and have taken my first photo just round my bedroom.
I was surprised at how crisp the image turned out and this is indoors with the flash.
I can't wait to get outdoors.
I've currently got a bag that came with it but it is good enough for the lenses and won't fit the camera unless I remove the lens.
What do you use when taking your camera out with you for storage?
Thanks again.
|
If I'm only taking the camera and one short lens (not the 70-300) I use a Lowepro nova mini - http://cgi.ebay.co.uk/NEW-LOWEPRO-NO...-/360238172677
I have Tamrac lens cases for all the lenses so I can put one in my backpack if needed - http://www.tamrac.com/g_modularaccessory.htm
If I'm taking the full set of lenses I have a Lowepro Inverse 200AW - http://products.lowepro.com/product/...-AW,2101,7.htm
When changing lenses I aim the body downwards so dust can't get in and onto the sensor. There's a Clean Image Sensor option (page 244 in the manual) but I've not needed to use it.
|
|
|
20-04-2010, 08:46
|
#401
|
|
Hello !
Join Date: Mar 2004
Location: Somewhere
Services: AppleTV, Netflix
Posts: 16,803
|
Re: CF: Clickers Corner
Thanks for those pics.
I did get a bag with it buy so far it only fits my lenses or camera but not too well padded. It will have to do for the moment though I think.
I hope I didnt let too much dust in. I had my camera facing up and quickly put the lens on.
Have many people had issues with dust when changing lenses?
Thanks for your help.
|
|
|
20-04-2010, 11:28
|
#402
|
|
Inactive
Join Date: Nov 2006
Location: on holiday by mistake
Age: 56
Services: Vivid 200, Full House, V6 x2
Posts: 5,977
|
Re: CF: Clickers Corner
Quote:
Originally Posted by Halcyon
Thanks for those pics.
I did get a bag with it buy so far it only fits my lenses or camera but not too well padded. It will have to do for the moment though I think.
I hope I didnt let too much dust in. I had my camera facing up and quickly put the lens on.
Have many people had issues with dust when changing lenses?
Thanks for your help.
|
No matter how careful you are don't be surprised if you eventually get a dust speck on your sensor; the sensor is electrically charged so it becomes a magnet for any small particles which may have found their way into the camera body even after a few seconds with the lens off. You'll notice the telltale blotches against sky particularly if you shoot aircraft or you can check specifically with the white card method.
Depending on how apparent is you can either remove the artifacts with software as part of your workflow or get your sensor professionally cleaned. Some people report success sensor cleaning themselves but I'd rather have it done at a service centre tbh.
|
|
|
20-04-2010, 12:52
|
#403
|
|
step on my trip
Join Date: Jul 2003
Posts: 3,767
|
Re: CF: Clickers Corner
Quote:
Originally Posted by Uncle Peter
Depending on how apparent is you can either remove the artifacts with software as part of your workflow or get your sensor professionally cleaned. Some people report success sensor cleaning themselves but I'd rather have it done at a service centre tbh.
|
agreed
__________________
“Most people don’t listen to understand. They listen to reply. Be different.”
- Jefferson Fisher
|
|
|
20-04-2010, 15:43
|
#404
|
|
Inactive
Join Date: Jun 2003
Location: Abertawe
Services: 10Mb BB, DTV & Phone
Posts: 2,859
|
Re: CF: Clickers Corner
I agree, I wouldn't attempt dust removal off the sensor myself.
When I change lenses I've got into the habit of holding the camera with the lens opening facing the ground. After a year of use and changing a lens nearly every day, I've not acquired any dust spots on the sensor. If I have to change a lens outside and it's dusty or the wind is blowing, I put the camera into an unused Tesco (or similar) shopping bag I have rolled up in my camera bag for the purpose.
|
|
|
20-04-2010, 15:59
|
#405
|
|
Born again teenager.
Join Date: Feb 2007
Location: Manchester. (VM area 20)
Age: 78
Services: Maxit TV, M250 Fibre BB.
Phone-Anytime Chatter
Posts: 13,934
|
Re: CF: Clickers Corner
So that's the definition of a camera geek. Someone who swaps his camera lens in a Tesco carrier bag. I assume the more upperclass geek will use a Harrods bag.
Sorry DW couldn't resist.
__________________
"I intend to live forever, or die trying" - Groucho Marx..... "but whilst I do I shall do so disgracefully." Jo Glynne
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT. The time now is 01:38.
|