| 
	
		
 
 Switch Off Router's RF Power 
	
	
		
	
	
	
		|  02-01-2012, 10:56 | #16 |  
	| Inactive 
				 
				Join Date: Jun 2006 Location: Cambridge Services: Sky TV, VM TV, 20meg bb, tel, and a lobster (but the lobster died). 
					Posts: 4,349
				      | 
				
				Re: Switch Off Router's RF Power
			 
 
			
			
	Quote: 
	
		| 
					Originally Posted by RB2004  ... turning off the rf on 1 wireless router relatively speaking will make 0 difference to somebody's health in terms of cancer risks from rf transmissions.... |  You are confusing "reduction of risk" (which is achievable, we all do it every day) with "zero risk" (which is a theoretical concept).
 
 
	Quote: 
	
		| ...need radiation checks every now and again just as somebody in a nuclear power station would as they fly at altitudes where the radiation exposure is higher. |  You are confusing very different types of radiation.
		 |  
	|   |   |  
	
		
	
	
	
		|  02-01-2012, 13:17 | #17 |  
	| Inactive 
				 
				Join Date: Jun 2009 Services: Services:
200 Mbit Gamer on Hub 3, 
3x Arris V6 Boxes, 
CISCO V HD,
VIP Package 
					Posts: 689
				      | 
				
				Re: Switch Off Router's RF Power
			 
 
			
			they are different types of radiation yes, but still have harmfull effects just the same in high exposure.
		 |  
	|   |   |  
	
		
	
	
	
		|  02-01-2012, 13:25 | #18 |  
	| laeva recumbens anguis Cable Forum Team 
				 
				Join Date: Jun 2006 Age: 68 Services: Premiere Collection 
					Posts: 43,792
				      | 
				
				Re: Switch Off Router's RF Power
			 
 
			
			And "high exposure" is the point.....
 One assesses risks, and mitigates appropriately (hopefully) - you don't / shouldn't  apply the same mitigation effort for very unlikely/very low impact risks (on the likelyhood/impact matrix) as you would for very high likelyhood and/or very high impact risks.
 
				__________________Thank you for calling the Abyss.
 If you have called to scream, please press 1 to be transferred to the Void,  or press 2 to begin your stare.
 If my post is in bold and this colour, it's a Moderator Request.
 |  
	|   |   |  
	
		
	
	
	
		|  04-01-2012, 19:02 | #19 |  
	| Inactive 
				 
				Join Date: Jul 2009 Location: In the thick of East Anglia 
					Posts: 573
				      | 
				
				Re: Switch Off Router's RF Power
			 
 
			
			I have a nice lady friend who refuses to have WiFi anywhere near her and she's "read" (probably in some chat magazine) that it can drive you mad. She is on the mobile all day.I think it's already started.
 
 I nearly started a fight at a party by suggesting the best place to put a GSM base station is very close to, or maybe within the school grounds.
 
 If you understand the science, then it makes sense. If you don't then you hit out at the suggester (and miss).
 
 Happy to explain how this works here or via PM.
 |  
	|   |   |  
	
		
	
	
	
		|  04-01-2012, 21:03 | #20 |  
	| - 
				 
				Join Date: Jun 2003 Location: Somewhere Services: Virgin for TV and Internet, BT for phone 
					Posts: 26,546
				      | 
				
				Re: Switch Off Router's RF Power
			 
 
			
			
	Quote: 
	
		| 
					Originally Posted by Waldo Pepper  I have a nice lady friend who refuses to have WiFi anywhere near her and she's "read" (probably in some chat magazine) that it can drive you mad. She is on the mobile all day.I think it's already started.
 
 I nearly started a fight at a party by suggesting the best place to put a GSM base station is very close to, or maybe within the school grounds.
 
 If you understand the science, then it makes sense. If you don't then you hit out at the suggester (and miss).
 
 Happy to explain how this works here or via PM.
 |  The science is simple...   The Antennas used only transmit from the side (note:  The Antennas I refer to are inside the protective casings we see mounted on the Mobile base stations).   As such, they are oriented so that  they transmit out of the side of the base station, where the signal will reach the most users, rather than downward, where the only thing receiving the signal will be the earth and a couple of people standing by the base station.
 
To ensure that the signal reaches the maximum amount of people possible, the base station is normally mounted quite high, as gravity does (slowly) affect the path taken by radio signals.
 
As such, by putting the mobile mast next to the school, the signals it generates will be flying several metres over everyone's head.
 
TV and radio transmitters also suffer the same limitations, but they have to transmit over a wider area, hence they can be hundreds of feet tall (600 odd in the case of Crystal Palace).
 
That's a gross simplification, but I believe I've explained the basics quite well.
		 |  
	|   |   |  
	
		
	
	
	
		|  05-01-2012, 20:12 | #21 |  
	| Inactive 
				 
				Join Date: Jul 2009 Location: In the thick of East Anglia 
					Posts: 573
				      | 
				
				Re: Switch Off Router's RF Power
			 
 
			
			
	Quote: 
	
		| 
					Originally Posted by Stuart  The science is simple...   The Antennas used only transmit from the side (note:  The Antennas I refer to are inside the protective casings we see mounted on the Mobile base stations).   As such, they are oriented so that  they transmit out of the side of the base station, where the signal will reach the most users, rather than downward, where the only thing receiving the signal will be the earth and a couple of people standing by the base station.
 To ensure that the signal reaches the maximum amount of people possible, the base station is normally mounted quite high, as gravity does (slowly) affect the path taken by radio signals.
 
 As such, by putting the mobile mast next to the school, the signals it generates will be flying several metres over everyone's head.
 
 TV and radio transmitters also suffer the same limitations, but they have to transmit over a wider area, hence they can be hundreds of feet tall (600 odd in the case of Crystal Palace).
 
 That's a gross simplification, but I believe I've explained the basics quite well.
 |  Gravity????? 
It's down to the horizontal polarisation of the base station aerials which is by design. Known as Beamwidth or lobes. They are designed for location and channels they can handle.
 
There are normally three aerials/operator/base station to give you 120 degree segments.
 
Rural base stations are high for reasons you state, but you get micro/pico cells to cover a very small specific areas. I live close to a microcell and the mast is about 50 feet high and probably can only handle about 16 simultaneous calls. The aerials will be designed to have short range but large bubbly lobes that extend down to about 10 feet at close range. The high base stations hand signals down to these. Known as Umberellas.
 
You cannot have large lobes that travel a long way (like TV transmitters) without maxing the output power. Crystal Palace in is the order of 5Megawatts IRRC as it covers out as far as Hampshire.
 
A school base station (picocell) could easily be the size of small cabinet in a school room.
 
However with kids these days and the amount of phone use at schools, you may need a full power base station/desk    
Normally Wikipedia can contain trash explanations, but I believe as an engineer is a pretty good simple explanation in para 1.
http://en.wikipedia.org/wiki/Picocell |  
	|   |   |  
	
		
	
	
	
	
	| 
	|  Posting Rules |  
	| 
		
		You may not post new threads You may not post replies You may not post attachments You may not edit your posts 
 HTML code is Off 
 |  |  |  All times are GMT +1. The time now is 06:59. |