V+ : Not responding?

[pythagoras]

Originally Posted by bw41101

Well (for the benefit of everyone who contributed) would you like to enlighten us all of what you actually did to fix the issue?

Quid pro quo and Si thee.

I guess the last question in spiders link:


Q: I've set my V+ output to HD, but I don't have an HDTV and now I can't see any pictures
A: (Scientific-Atlanta) Hold in the Stop and Play/Pause buttons on the front panel, and press Reset. Keep Stop and Play/Pause held in until the display says 'boot'. After a few seconds the display should say 'outpt'. Press the Fast Forward button several times until the display says 'Sd', then press OK. Wait for the V+ to reboot then you should be back in SCART mode.

You can also use this method to switch the V+ into HD mode - either select "Hdrni" (HDMI) or "YPbPr" (component) before you press OK. And if you use the Rewind button, you can switch between 720p and 1080i

(Samsung) Temporarily plug the TV into the 'VCR' SCART socket on the back of the V+. You will then be able to see the menus so you can switch back to SCART mode. Don't forget to move the SCART lead back to the 'TV' socket when you've finished.

Regards

John

[bbxxl]

Originally Posted by bw41101

Well (for the benefit of everyone who contributed) would you like to enlighten us all of what you actually did to fix the issue?

Quid pro quo and Si thee.

As per the post above. I followed the link provided by spider plant, sorry, I thought that was clear.