modem config

[Peter_]

Originally Posted by v0id

I guess somethings changed with it over the last couple of days

On my Webstar modem when going to http://192.168.100.1, I've only recently started getting the:

"This feature is not enabled.
This feature has not been enabled in your cable modem."

on the Signal / Status / Log menu items. :/

Not really botherd ATM, since my broadband's working as expected, but out of curiosity I used the default password on the access level page and the log shows

Improper Configuration File CVC Format

The is no password required on the Webstar modems or Motorola modems, passwords were an NTL foible on their modems, Telewest never used them up till the Ambit 256.

My Motorola modem gives me full access to all pages.

[v0id]

Originally Posted by Moldova

The is no password required on the Webstar modems or Motorola modems, passwords were an NTL foible on their modems, Telewest never used them up till the Ambit 256.

My Motorola modem gives me full access to all pages.

Precisely why I put in my post

"I guess somethings changed with it over the last couple of days"

[Hom3r]

I have this as well, there is another thread about it.

http://www.cableforum.co.uk/board/12...-flashing.html

to be fair though a search wouldn't have help you.

[Peter_]

Originally Posted by v0id

Precisely why I put in my post

"I guess somethings changed with it over the last couple of days"

I would advise you to call Tech Support as the should be no password used to access the Webstar modem as that is something I have not heard of and I should know check my sig below.

[Milambar]

I hope that this isn't the start of "lets hide the configs", because sometimes when people upgrade, the modem doesn't accept the upgraded config file first time round (as was the case for me some months ago), and the only way people realise, is by checking the config.

Without the ability to check the modem config, people could, in theory, be paying for 10meg, while their modem is still only configured for 2megs without realizing it.

Just to add, my modem shows the config just fine at the moment, so no problems here.

[Peter_]

Originally Posted by Milambar

I hope that this isn't the start of "lets hide the configs", because sometimes when people upgrade, the modem doesn't accept the upgraded config file first time round (as was the case for me some months ago), and the only way people realise, is by checking the config.

Without the ability to check the modem config, people could, in theory, be paying for 10meg, while their modem is still only configured for 2megs without realizing it.

Just to add, my modem shows the config just fine at the moment, so no problems here.

As part of my job I may ask you to check the power levels within your modem so disallowing users access to the configuration pages will make diagnostics more difficult.

[Munkeh]

Already have a fix for the us/ds speeds not being reported correctly on the Ambit 250, it should be rolled out shortly.

The other issue of the internal diagnostics page being unavailable should be fixed at the same time.

[djmagnifique]

Originally Posted by Munkeh

Already have a fix for the us/ds speeds not being reported correctly on the Ambit 250, it should be rolled out shortly.

will this also fix this same problem on the virgin 256 modem?

[Munkeh]

Originally Posted by djmagnifique

will this also fix this same problem on the virgin 256 modem?

No, unfortunately this will only be for the 250's.

I'll chase up the 256 firmware in the morning!

[bigian]

Frequency 299000000 307000000 315000000 N/A
Lock Status
(QAM Lock/FEC Sync/MPEG Lock) Y/Y/Y Y/Y/Y Y/Y/Y N/N/N
Channel Id 33 34 35 N/A
Modulation 256QAM 256QAM 256QAM N/A
Symbol Rate
(Msym/sec) 6.952 6.952 6.952 N/A
Interleave Depth I=12
J=17 I=12
J=17 I=12
J=17 N/A
Power Level
(dBmV) -2.00 -2.13 -2.43 N/A
RxMER
(dB) 37.09 37.36 37.36 N/A
Correctable
Codewords 89 109 107 N/A
Uncorrectable
Codewords 304 267 254 N/A
upstream
Channel Type 1.0 N/A N/A N/A
Channel ID 4 N/A N/A N/A
Frequency
(Hz) 37504000 N/A N/A N/A
Ranging Status Success N/A N/A N/A
Modulation 16QAM N/A N/A N/A
Symbol Rate
(KSym/sec) 2560 N/A N/A N/A
Mini-Slot Size 2 N/A N/A N/A
Power Level
(dBmV) 48.25 N/A N/A N/A
T1 Timeouts 0
T2 Timeouts 0 0 0 0
T3 Timeouts 2 0 0 0
T4 Timeouts 0 0 0 0


Sat, 21 Mar 2009 18:09:34 UTC

Test 1: 1024K took 4029 ms = 254.2 KB/sec, approx 2095 Kbps, 2.05 Mbps
Test 2: 1024K took 3783 ms = 270.7 KB/sec, approx 2231 Kbps, 2.18 Mbps
Test 3: 1024K took 4198 ms = 243.9 KB/sec, approx 2010 Kbps, 1.96 Mbps
Test 4: 2048K took 7886 ms = 259.7 KB/sec, approx 2140 Kbps, 2.09 Mbps

Overall Average Speed = approx 2119 Kbps, 2.07 Mbps


To repeat this test from the source server click here.

here you go 50mb connection wnr 2000 router but i get 45mb directly from modem to comp i have tried 3 brand new netgear routers latest firmware ii am hardwired to the router have changed my security to wpaPSK
Helllllllllllllllllllllllllllp
thx in advance

[JayZmac01]

im on 20mb and my modem operation config page says the same thing:-

Network Access : Allowed
Maximum Downstream Data Rate : 0
Maximum Upstream Data Rate : 0
Maximum Upstream Channel Burst : 0
Maximum Number of CPEs : 1
Modem Capability : Concatenation Enabled, Fragametation Enabled, PHS Enabled

I'm not having any issues with my connection at all. A friend of mine has the same speed internet as me has the same operation config page says zero's.