What have you fixed lately?

[Dude111]

I fixed my KTEL cassette earlier.....

The pad was loose and anyone who loves 8tracks/cassettes know how they sound w/no pad!! (uugghh)

[papa smurf]

Originally Posted by Dude111

I fixed my KTEL cassette earlier.....

The pad was loose and anyone who loves 8tracks/cassettes know how they sound w/no pad!! (uugghh)

Is it in your model T ford

[Dude111]

No its in my room

Ya mean my 8 track player right?

Panasonic 808RS: http://tse4.mm.bing.net/th/id/OIP.Hl...dd&o=5&pid=1.1

Isnt she pretty???

[SnoopZ]

Toilet Roll holder onto plasterboard wall, previous plasterboard fixings kept failing so I bought some Gripit fixings and they're fantastic and work easily as long as there is space behind for the wings to open up.

https://www.amazon.co.uk/Grip-GRPCUR...%2C103&sr=8-10

[Dude111]

I got a cassette the other day and its a pretty good album from Gallery....

The earliest cassette I have seen with Dolby (It says 'DOLBY B' on it) - 1972

It was on one of those early 70s cartridges by Ampex!

Now Ampex used to put out excellent quality 8 tracks,casettes,etc..

They had paper labels on the cassettes and they were goregously made and ran well....... In the early 70s they started printing it right on the cartridge itself.......

This one didnt play well,it was aweful..... I opened it and found out why!!

NO BLASTED ROLLERS IN THE SHELL!!!!!!!!!

What kind of a moron would put a cassette together W/O ROLLERS and expect it to run well??

It has a nice pad in it but it didnt play worth shit!


I like the band and songs and luckily I had another cartridge that DOES HAVE ROLLERS and I put it in that one.......

I will say: This was the EASIEST AMPEX TAPE I HAVE HAD TO OPEN! (Usually Ampex tapes are put together so well you cant take them apart w/o ruining them.. (Expecially Ampex 8 tracks!!!!))

2 songs I knew instantly: I believe in Music and nice to be with you.......

[SnoopZ]

I've fixed a PS5 Dualsense controllers left stick drift by replacing the potentiometer with one that that is meant to be drift proof(Aknes TMR). I had to buy a new soldering iron from AliExpress and a PCB vice from Amazon, could have done with a new set of eyes too!

I was unsuccessful with my attempt last weekend and spent hours trying to remove the lead free solder which has a much higher melting point so had to give up, so I purchased 5 metres of KESTER LEADED SOLDER Sn63Pb37 for £5 which has a very low temperature melting point and with this I was able to remove the old solder from the PCB holes which are very small and install the new potentiometer.

These controllers cost £60-£70 each and I have 3 to fix so financially this is a success.

[Dude111]

Im glad ya stuck with it Snoop... Dont give up!!

It makes ya feel g00d doesnt it???