Superhub : Deja Vu. But it took years to get here again.

[snazzy]

Startup Procedure
Procedure Status Comment
Acquire Downstream Channel 322750000 Hz Locked
Connectivity State OK Operational
Boot State OK Operational
Configuration File OK
Security Enabled BPI+

Downstream Channels
Lock Status Modulation Channel ID Max Raw Bit Rate Frequency Power SNR Docsis/EuroDocsis locked
Locked QAM256 31 55616000 Kbits/sec 322750000 Hz 8.1 dBmV 40.7 dB Hybrid
Locked QAM256 24 55616000 Kbits/sec 266750000 Hz 7.4 dBmV 40.9 dB Hybrid
Locked QAM256 25 55616000 Kbits/sec 274750000 Hz 7.0 dBmV 40.4 dB Hybrid
Locked QAM256 26 55616000 Kbits/sec 282750000 Hz 7.0 dBmV 40.7 dB Hybrid
Locked QAM256 27 55616000 Kbits/sec 290750000 Hz 6.8 dBmV 40.9 dB Hybrid
Locked QAM256 28 55616000 Kbits/sec 298750000 Hz 7.9 dBmV 40.9 dB Hybrid
Locked QAM256 29 55616000 Kbits/sec 306750000 Hz 8.2 dBmV 41.0 dB Hybrid
Locked QAM256 30 55616000 Kbits/sec 314750000 Hz 8.0 dBmV 40.6 dB Hybrid

Upstream Channels
Lock Status Modulation Channel ID Max Raw Bit Rate Frequency Power
Locked ATDMA 2 20480 Kbits/sec 35800000 Hz 43.7 dBmV
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV
Unlocked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV

Primary Downstream Service Flow
Downstream(0)
SFID 7938
Max Traffic Rate 10242000 bps
Max Traffic Burst 3044 bytes
Mix Traffic Rate 0 bps
Primary Upstream Service Flow
Upstream(0)
SFID 32158
Max Traffic Rate 1040000 bps
Max Traffic Burst 8160 bytes
Mix Traffic Rate 0 bps
Max Concatenated Burst 8160 bytes
Scheduling Type Best Effort

[thenry]

your on 10meg download and 1meg upload. the SH hasnt updated to the latest available firmware. your downstream power levels could be better. your upstream power level is good.

---------- Post added at 23:23 ---------- Previous post was at 23:20 ----------

pinhole reset the SH > http://help.virginmedia.com/system/s...MER_TYPE=Cable

be sure to hold down for around 20seconds. all lights on the other side will go blue.

[snazzy]

It's not going to 30 until April. I'm happy for it to stay at 10meg and work like it has done for the last few years up until a few weeks back when it all went south.

[General Maximus]

I would put an attenuator on it if it was me

http://www.ebay.co.uk/itm/FORWARD-PA...item27c31ac8c6

[snazzy]

I'm seeing some off the scale spikes in the latency and it's only been scanning for 24hrs.

[thenry]

can you please leave your SH on.

[snazzy]

Originally Posted by thenry

can you please leave your SH on.

Sorry, what do you mean?

[thenry]

dont turn it off at night or when you go out or when its not in use. just leave it on.

[snazzy]

Oh right. Well I can see the red part where it's off. It's the huge yellow spikes all over it when we are using it that's the issue. I think.

[thenry]

did you pinhole the SuperHub and if you have did it downloaded the latest firmware?

could you log in to thinkbroadband and post the live monitor.

http://www.thinkbroadband.com/ping/monitors.html

click on Share Live Graph then Generate

and then copy and paste everything in the box labelled

Small Graph (500x219 px) - BBCode (for forums; not yet supported on thinkbroadband forums)

[snazzy]

Red is where it was off last night.





---------- Post added at 16:39 ---------- Previous post was at 16:37 ----------

At the moment everything is okay, but it's coming to the time where it just goes mental.

[Sephiroth]

Nothing wrong with the TBB graph. It's the blue (average) that matters. It only takes the odd ping to be high yellow and you see that on the graph necause it's the maximum.

So what goes mental? Just the yellow? Or your internet speeds?

[snazzy]

The internet becomes almost unusable. Pages will not load, games kick you off. Nothing on line works.

[Sephiroth]

During that blip period (which lots of us had yesterday, including me), the upstream (which is essential for gaming) willbe severely affected.

[thenry]

and rapid web page loading