how do i prove

carbondust · 07-12-2005, 10:45

hello,

i am new at this and am also at work so i cant give you any details about my computer.

anyway i am using ntl 1mb broadband but i am having problems with it. the problem is that sometimes it works, sometimes it works and then stops, and sometimes it does not work at all, it always works if u reset the modem. anyway i been phoning the tech support people loads and they come up with 3 different problems with my computer plus one idea about how to use my broadband

1: Its My Firewall.. if that was true how come it works sometimes with no problems, surely it would not work at all. i dont want to run it without a firewall but have disabled it and it does the same thing
2: its my USB port: i change my connection over to a network card, when i phoned them up to help me reconnect, the lady said there was a problem with my modem and i have to phone and book an engineer. when i did this, they said there was nothing wrong
3: that i had a virus: i am using norton suite and it found nothing

they suggusted that when i turn my computer off, to turn my modem off and then just before i start my computer on, turn my modem on

is there anyway i can prove that its the modem and not my computer as my parents want to get rid of it all together?

rob

Wicked_and_Crazy · 07-12-2005, 10:53

firstly i would connect to the modem using ethernet if you can.

secondly i would boot the PC into safe mode and then run a speed test. This will ensure that there is no firewall or any applications running in the back ground

Russ · 07-12-2005, 10:57

Quote:

Originally Posted by Wicked_and_Crazy

secondly i would boot the PC into safe mode and then run a speed test. This will ensure that there is no firewall or any applications running in the back ground

For this to work surely it needs to be Safe Mode with Networking?

Wicked_and_Crazy · 07-12-2005, 10:59

Quote:

Originally Posted by Russ D

For this to work surely it needs to be Safe Mode with Networking?

correct, sorry i assumed and shouldnt have

jasbirds · 07-12-2005, 11:33

I to hade this problem and i hade to stop useing the usb and change over to ethernet and never had the problem since
hope this helps

carbondust · 07-12-2005, 11:45

ok, i have an network card in my computer, did u reinstall the modem software? as when i connect the card to the modem nothing happens

robert

Gareth · 07-12-2005, 11:49

Did you reboot the modem after switching from using the USB cable to using an ethernet cable? If not, then you will need to do so.

---------- Post added at 12:49 ---------- Previous post was at 12:48 ----------

Oh, and when using the modem via an ethernet cable, you won't need to install any drivers for the modem if you are running Windows XP (and 2000 if I remember correctly)

carbondust · 07-12-2005, 12:07

i think i did but i will try it when i get home.
thanks

robert

handyman · 07-12-2005, 12:19

Quote:

Originally Posted by jasbirds

I to hade this problem and i hade to stop useing the usb and change over to ethernet and never had the problem since
hope this helps

Thats because many usb chipsets decide to mess about with power saving and stuff.

I think Its time for ntl to make ethernet the default installation method. Lets face it it would cut down calls to tech support.

Worked for a adsl providor with usb only modems and a large % of calls where lost driver discs, problems after re-install of OS etc. With ethernet an xp pro pc will pick up the ethernet internet connection and configure it automatically most of the time during install.

Derek · 07-12-2005, 12:26

Quote:

Originally Posted by handyman

I think Its time for ntl to make ethernet the default installation method. Lets face it it would cut down calls to tech support.

I think they started recommending E/Net when the 250 Modems came out. Might be wrong but I'm sure I saw something before I left with the differences and the new installer disc with Ethernet recommended was one of them.

AbyssUnderground · 07-12-2005, 16:31

Ive always used Ethernet and even with a fresh install of XP, you plug it in and internet explorer picks up the connection straight off. No configuring, nothing

carbondust · 08-12-2005, 09:11

thanks for your help but i tried to use ethernet and it did not work. i tried reinstalling the drivers for my modem and it said that my modem was faulty

evern when i tried to reinstall in on usb

thank goodness for norton goback

Mick Fisher · 08-12-2005, 17:53

It may not have anything to do with it but I see lots of posts that seem to suggest that Norton can cause as many problems as it purports to fix.

The sometimes it works and sometimes it don't seems to be a common denominator of the threads I have read. The Norton app usually accredited to being the problem maker is NIS.

It is reported to be a b****r to to get off your puter. Some saying the only way is a complete reinstall.

I've had no personal experience and frankly as I wouldn't let any of that c**p near my machine, I hope not to gain any.

carbondust · 09-12-2005, 12:39

that all maybe true but what firewall do you recommend then? plus i use all the other bits of their suite (anti-virus and the such like)

VSPNET · 09-12-2005, 13:18

It sounds like you have a signal problem to me, I had the same problem, you need to ring NTL and ask them to ping your modem to see the Db level of the signal.

IF Db is:

-5 or below, OR, +5 or above

this might be your problem.