Moving from STB to stand alone CM - any issues?
31-12-2004, 14:45
|
#1
|
|
Inactive
Join Date: Nov 2003
Location: Hove
Services: M+ TV, TiVo 500GB, 100 MB BB, Phone
Posts: 199
|
Moving from STB to stand alone CM - any issues?
I'm considering ditching my ntl TV package but retaining broadband and the phone line. Customer services advised that they would remove my STB and install a cable modem.
Currently I have my STB connected to a Netgear wireless router and my PC is upstairs in the loft. Everything works just fine.
Would the change to a cable modem work OK with my wireless set up?
Is it best to have the CM near the PC or would it be OK to have it downstairs more or less where my current STB is? I'm not really confident of ntls engineers ablity to not make a god awful mess getting it installed in the loft.
Thanks for any advice.
|
|
|
31-12-2004, 14:56
|
#2
|
|
Inactive
Join Date: Dec 2004
Location: hersham boy,
Age: 50
Services: walking speed BB and tivo
Posts: 656
|
Re: Moving from STB to stand alone CM - any issues?
hello , i am having the same thing on wednesday i am all so set up with a actiontec wireless network and have to change so i can have my x box pluged in for x box live ,at a cost of £30.00 .
will i have to change the setings for the new modem ?
|
|
|
31-12-2004, 15:13
|
#3
|
|
Inactive
Join Date: Dec 2003
Location: Stoke on Trent
Services: Virgin Tivo
Premeire collection
152mb broadband
Posts: 224
|
Re: Moving from STB to stand alone CM - any issues?
Changed over my Set top box for a cable modem on my wireless network, and it worked fine
Shouldnt have any problems at all, you will need to re-register with the new Mac address though.
|
|
|
31-12-2004, 15:26
|
#4
|
|
Permanently Banned
Join Date: Jun 2003
Location: norton , teesside
Age: 58
Posts: 10,571
|
Re: Moving from STB to stand alone CM - any issues?
Quote:
|
Originally Posted by blenky
Would the change to a cable modem work OK with my wireless set up?
Is it best to have the CM near the PC or would it be OK to have it downstairs more or less where my current STB is? I'm not really confident of ntls engineers ablity to not make a god awful mess getting it installed in the loft.
Thanks for any advice.
|
no reason for it not to work , i would think it is preferable to have the sacm next to the pc but not essential
Quote:
|
Originally Posted by daz300
hello , i am having the same thing on wednesday i am all so set up with a actiontec wireless network and have to change so i can have my x box pluged in for x box live ,at a cost of £30.00 .
will i have to change the setings for the new modem ?
|
hi and  to the site , if i may ask , what is this actiontec thing that you are on about ???????
|
|
|
31-12-2004, 15:41
|
#5
|
|
Inactive
Join Date: Dec 2004
Location: hersham boy,
Age: 50
Services: walking speed BB and tivo
Posts: 656
|
Re: Moving from STB to stand alone CM - any issues?
lol thank you it is http://www.ntlworld.com/actiontec/ this . i am geting a belkin G set up soon .
|
|
|
31-12-2004, 15:42
|
#6
|
|
Inactive
Join Date: Nov 2003
Location: Hove
Services: M+ TV, TiVo 500GB, 100 MB BB, Phone
Posts: 199
|
Re: Moving from STB to stand alone CM - any issues?
Thanks for the reasuring words!
|
|
|
31-12-2004, 16:20
|
#7
|
|
Inactive
Join Date: Jun 2003
Location: Cambridge
Posts: 16,760
|
Re: Moving from STB to stand alone CM - any issues?
Quote:
|
Originally Posted by blenky
I'm considering ditching my ntl TV package but retaining broadband and the phone line. Customer services advised that they would remove my STB and install a cable modem.
Currently I have my STB connected to a Netgear wireless router and my PC is upstairs in the loft. Everything works just fine.
Would the change to a cable modem work OK with my wireless set up?
Is it best to have the CM near the PC or would it be OK to have it downstairs more or less where my current STB is? I'm not really confident of ntls engineers ablity to not make a god awful mess getting it installed in the loft.
Thanks for any advice.
|
Using a cable modem will be fine
Might be easier to have it by the PC, but I don't see there being a problem if you left it, & the router, downstairs - saves more drilling & cabling.
Quote:
|
Originally Posted by daz300
hello , i am having the same thing on wednesday i am all so set up with a actiontec wireless network and have to change so i can have my x box pluged in for x box live ,at a cost of £30.00 .
will i have to change the setings for the new modem ?
|
Why do you have to change to use XBox Live?
It's quite easy to use XBL with either an STB or a standalone modem, without paying ntl any extra.
Have a look here for info on using a direct connection:
http://www.cableforum.co.uk/board/showthread.php?t=715
You can also use a router, or use internet connection sharing (ICS).
and there's some wireless XBL info here: http://www.cableforum.co.uk/board/showthread.php?t=1342
|
|
|
31-12-2004, 16:40
|
#8
|
|
Inactive
Join Date: Dec 2004
Location: hersham boy,
Age: 50
Services: walking speed BB and tivo
Posts: 656
|
Re: Moving from STB to stand alone CM - any issues?
i rung up cs and i can not use x box live via my set top box, if i want it i have to change .
|
|
|
31-12-2004, 16:50
|
#9
|
|
Inactive
Join Date: Jun 2003
Location: Cambridge
Posts: 16,760
|
Re: Moving from STB to stand alone CM - any issues?
Quote:
|
Originally Posted by daz300
i rung up cs and i can not use x box live via my set top box, if i want it i have to change .
|
You can't subscribe to ntl's extra broadband & console service if you use an STB rather than a standalone cable modem (SACM), hence them saying that you have to change.
However:
You CAN quite easily use XBox Live via an STB, without having to change to a SACM & waste extra money on the console service.
All that is required is to clone the MAC address of your PC onto the XBox, so that when the XBox is connected to the STB, the STB still thinks it is connected to the PC. This is because, if you use an STB, every device you connect to it must have its MAC address registered with ntl via a special web page. As the XBox has no web browser, you cannot register the XBox's MAC, so instead you have to give it the MAC of a device which is already registered.
Easy instructions on how to use an XBox with an STB, via a direct connection, are here: http://www.cableforum.co.uk/board/showthread.php?t=715
If you already have a router (& I assume you do, as you say you have ntl's special wireless bundle?), then instead of a direct connection to the STB, you can connect the XBox to the router. No need for changing to a SACM, no need to pay ntl extra.
|
|
|
31-12-2004, 16:57
|
#10
|
|
Inactive
Join Date: Dec 2004
Location: hersham boy,
Age: 50
Services: walking speed BB and tivo
Posts: 656
|
Re: Moving from STB to stand alone CM - any issues?
not that i think that ntl would con me out of £30.00 for x mass but i did try all of that and i can not log me in to xbox live .
|
|
|
31-12-2004, 17:02
|
#11
|
|
Inactive
Join Date: Jun 2003
Location: Cambridge
Posts: 16,760
|
Re: Moving from STB to stand alone CM - any issues?
Strange. It *should* work perfectly. There really is no need whatsoever for the console service - it's just (IMO) a way for ntl to fleece money from people who don't realise they do not need it. Are you sure you followed the instructions exactly? Where did it fail? Is the XBox modded?
Plug XBox into a router - should work perfectly (but it must not have a cloned MAC on it)
Give XBox the PC's MAC (or the MAC of the USB-ethernet adapter if you use one), reboot STB, plug XBox into STB - should work perfectly.
I know loads of people who use ntl for XBoxLive, via STB & SACM - without using the ntl console service.
|
|
|
31-12-2004, 17:06
|
#12
|
|
Inactive
Join Date: Dec 2004
Location: hersham boy,
Age: 50
Services: walking speed BB and tivo
Posts: 656
|
Re: Moving from STB to stand alone CM - any issues?
once you have it do you have to keep it for a year ??
|
|
|
31-12-2004, 17:07
|
#13
|
|
Inactive
Join Date: Dec 2004
Location: hersham boy,
Age: 50
Services: walking speed BB and tivo
Posts: 656
|
Re: Moving from STB to stand alone CM - any issues?
i will try it now
|
|
|
31-12-2004, 17:12
|
#14
|
|
Inactive
Join Date: Jun 2003
Location: Cambridge
Posts: 16,760
|
Re: Moving from STB to stand alone CM - any issues?
Quote:
|
Originally Posted by daz300
once you have it do you have to keep it for a year ??
|
The console service? I don't think it has a minimum period like the main contract. AFAIK, you can cancel it with 30days notice.
However, you may have a new 12 month contract for the broadband itself, if you are changing from STB to SACM.
Still, nothing wrong with having a SACM (prob better than using an STB anyway), & very easy to use one for XBL without having the extra console service.
Quote:
|
Originally Posted by daz300
i will try it now
|
Good luck.
Have another look through the direct connection instructions I posted a link to.
Although, if you do use a router, then you should simply be able to plug the XBox into that - no point in having a direct connection if you already have a router.
|
|
|
31-12-2004, 17:25
|
#15
|
|
Inactive
Join Date: Dec 2004
Location: hersham boy,
Age: 50
Services: walking speed BB and tivo
Posts: 656
|
Re: Moving from STB to stand alone CM - any issues?
looks like it is working now. v happy . no need to pay the £ 30.00 now lol thank you 4 you help
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT. The time now is 16:28.
|