Wireless AV sender - Help! I'm pulling my hair out

jlbrown3 · 28-01-2010, 16:43

Good evening all

I have just bought a Wireless AV Sender set to use with my Sky+ HD box, and I can't seem to get it working. It's seems like it should be an easy process; I've concected the transmitter to the TV Out Scart connection on my Sky box, and connected the Receiver to the Scart input on my TV, but I am just getting a "no SCART signal" message?

The Senders are powered up and on the same channel (I'v tried the 3 channel options), the "magic eye" part of the setup works. I've tried connecting a TV in the same room as the sky box after verifying the SCART Out and SCART In with a SCART cable. Still no joy? Can anyone help?

Thanks in advance.

John

BenMcr · 28-01-2010, 16:44

First thing I'd check is whether the Sky+HD is set to RGB on SCART and whether the wireless senders support it

jlbrown3 · 28-01-2010, 16:46

I tried setting the SCART to PAL with same results...

Aragorn · 28-01-2010, 16:47

Guessing here, but you probably have your main TV connected via HDMI (otherwise the HD part would be useless) and if the Sky box is like the V+, the Scart is probably disabled while using HDMI.

BenMcr · 28-01-2010, 16:50

I think on the Sky+HD all outputs remain enabled

Aragorn · 28-01-2010, 16:51

Quote:

Originally Posted by BenMcr

I think on the Sky+HD all outputs remain enabled

As I say - guessing

nodrogd · 28-01-2010, 16:55

If they are like the V+ boxes, only the VCR scart will work with HDMI in use.

jlbrown3 · 28-01-2010, 17:41

Thanks for the replys so far....

My Sky box is currently HDMI but I have hooked it to my TV with SCART cable as well to test, and it works fine over both with both connections hooked up. I have replaced the SCART cable with the Senders, and I am still not getting a signal. I am totally flummoxed.

BenMcr · 28-01-2010, 23:03

Have you tried the senders with anything else, like a DVD or VCR?

jlbrown3 · 29-01-2010, 08:53

I'm going to try that tonight; my DVD player is set to use only HDMI at the moment, and of course it's remote is somewhere in the attic!

Grrrrrr.

jlbrown3 · 29-01-2010, 18:35

Tried the senders with DVD player using every SCART signal setting available, still no signal getting to television. Senders are going back, will try a different model. Thanks for all help offered. FYI the AV Sender set I have been failing to set up is Total Control Wireless AV Sender

John

jlbrown3 · 30-01-2010, 10:55

Just purchased AEI Digisender DX2000-LCD. Pluged in, worked straight away, done. My next problem is when my BT Vision box arrives on Friday!

Lando81 · 20-04-2014, 13:50

Hi

I am having a similar issue.

My sky TV is linked up to my main TV via a HDMI cable. I have followed the instructions for my wireless AV sender so I can watch the same channel in my bedroom but it just says "no signal" on my bedroom TV?

Can anyone help?

Thanks