You are here: Home | Forum | Sky HD routing through house
You are currently viewing our boards as a guest which gives you limited access to view most of the discussions, articles and other free features. By joining our Virgin Media community you will have full access to all discussions, be able to view and post threads, communicate privately with other members (PM), respond to polls, upload your own images/photos, and access many other special features. Registration is fast, simple and absolutely free so please join our community today.
i,ve just switched from Sky+ to sky HD . Signal for all my various tv's are routed through the house . Previously with the aid of small in-line eyes i have been able to control Sky+ all around the house but with HD these same units dont seem to work . Any ideas
The HD boxes have a thin layer of coloured covering on the front which the IR signals pass through (if you look theres no IR input window). It may be that the IR emitted by the eyes is not sufficient to pass through the covering. You could try lifting off the lid and seeing if it works and if so positioning the IR emitter in a place where it is detected within the box.
If you are refering to the magic eyes that connect onto the RF output from the sky box then they should work fine, you need to make sure that they are connected to RF Output 2 on the back of the Sky box, then go to Service, 4, 01 select, RF outlets, and make sure that the power is turned on and then they should work fine.
If you are refering to the magic eyes that connect onto the RF output from the sky box then they should work fine, you need to make sure that they are connected to RF Output 2 on the back of the Sky box, then go to Service, 4, 01 select, RF outlets, and make sure that the power is turned on and then they should work fine.
Lets hope he got it sorted within the last three months!
Join CF
You are here: 
to the site.
