Forum Articles
  Welcome back Join CF
You are here You are here: Home | Forum | ELSA Lancom L-11 Wireless Access Point

You are currently viewing our boards as a guest which gives you limited access to view most of the discussions, articles and other free features. By joining our Virgin Media community you will have full access to all discussions, be able to view and post threads, communicate privately with other members (PM), respond to polls, upload your own images/photos, and access many other special features. Registration is fast, simple and absolutely free so please join our community today.


Welcome to Cable Forum
Go Back   Cable Forum > Computers & IT > General IT Discussion

ELSA Lancom L-11 Wireless Access Point
Reply
 
Thread Tools
Old 02-08-2004, 10:53   #1
stigthew
Inactive
 
Join Date: Aug 2004
Posts: 6
stigthew is an unknown quantity at this point
ELSA Lancom L-11 Wireless Access Point

Hi everyone,

I've been connected to NTL 600k for two years or so now, in general it's been pretty good.

About 6 months ago, I bought a new laptop with Wireless on board, and thought I'd get a Wireless PCMCIA for my old laptop (which originally setup NTL). Since then I have been using ICS to provide a wireless broadband connection in the house.

However, I now want to move my old laptop out of the room where the Cable Modem is, so I got hold of a Wireless Access point (ELSA Lancom L-11). With a firmware upgrade (supplied on CD), this supposedly allows it's wired Ethernet port to connect directly to a DSL Cable Modem. However, so far, I have had no luck whatsoever

Has anybody out there had any experience with the ELSA L-11? To be perfectly honest, I haven't got a clue where to start - and the manual with the Access Point is about as useful as a choco teapot...

Any help / suggestions would be gratefully accepted!
stigthew is offline   Reply With Quote
Advertisement
Old 04-08-2004, 13:09   #2
stigthew
Inactive
 
Join Date: Aug 2004
Posts: 6
stigthew is an unknown quantity at this point
Re: ELSA Lancom L-11 Wireless Access Point

Please? I'm desperate...
stigthew is offline   Reply With Quote
Old 04-08-2004, 13:12   #3
Neil
Inactive
 
Join Date: Jun 2003
Posts: 6,058
Neil has a bronze arrayNeil has a bronze arrayNeil has a bronze array
Neil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze array
Re: ELSA Lancom L-11 Wireless Access Point

Ok....

Bear with me a few moments while I digest what you have written.
Neil is offline   Reply With Quote
Old 04-08-2004, 13:14   #4
Neil
Inactive
 
Join Date: Jun 2003
Posts: 6,058
Neil has a bronze arrayNeil has a bronze arrayNeil has a bronze array
Neil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze array
Re: ELSA Lancom L-11 Wireless Access Point

Quote:
Originally Posted by stigthew
Hi everyone,

I've been connected to NTL 600k for two years or so now, in general it's been pretty good.
That's nice.

Quote:
Originally Posted by stigthew
About 6 months ago, I bought a new laptop with Wireless on board, and thought I'd get a Wireless PCMCIA for my old laptop (which originally setup NTL). Since then I have been using ICS to provide a wireless broadband connection in the house.
So far so good then....

Quote:
Originally Posted by stigthew
However, I now want to move my old laptop out of the room where the Cable Modem is, so I got hold of a Wireless Access point (ELSA Lancom L-11). With a firmware upgrade (supplied on CD), this supposedly allows it's wired Ethernet port to connect directly to a DSL Cable Modem. However, so far, I have had no luck whatsoever
You don't have a 'DSL cable modem'....
What have you actually done/tried?

Quote:
Originally Posted by stigthew
Has anybody out there had any experience with the ELSA L-11? To be perfectly honest, I haven't got a clue where to start - and the manual with the Access Point is about as useful as a choco teapot...
I have no experience with that hardware, but tell us a bit more about how everything is connected/set up-the more info the better.

Quote:
Originally Posted by stigthew
Any help / suggestions would be gratefully accepted!
The ball is rolling!

[Edit/Update]-The ELSA Lancom L-11 appears to be an access point with an integrated DSL router, & I think that is your problem.

What you (ideally) need is a standard wireless router-such as one of these: http://www.broadbandbuyer.co.uk/Shop...pID=38&Alt=Yes
That will connect to your modem, & will then pass the BB connection to your wireless laptop(s)

If you then need a wireless access point (WAP), then you need one of these: http://www.broadbandbuyer.co.uk/Shop...upID=8&Alt=Yes

HTH
Neil is offline   Reply With Quote
Old 04-08-2004, 13:26   #5
stigthew
Inactive
 
Join Date: Aug 2004
Posts: 6
stigthew is an unknown quantity at this point
Re: ELSA Lancom L-11 Wireless Access Point

Thanks for hearing me, Neil...

I've got the standard NTL Ambit USB / Ethernet Cable Modem, which was previously connected to my WinXP Pro laptop via USB. This was the machine that I used to register with NTL way back in the mists of time, and everything has been peachy.

The Wireless Access Point has an Ethernet connection (to be expected), which, with aforementioned Firmware upgrade, *allegedly* connects to Ethernet-enabled Cable Modems.

The manual for the WAP rants on about supplying a service name / numbers, username, password etc. - but my understanding is that you don't need to *log in* to NTL per se. I've also read articles (on lesser sites ;-)) claiming that you need to 'spoof' the MAC address of the computer that originally registered with NTL, although I don't believe that this is possible with the ELSA device.

I can communicate with the ELSA over wireless, and get into configuration mode, and it seems to acknowledge that it is connected to something via the Ethernet port - it even appears to have two IP addresses, 10.0.0.1 and another starting with 169 (I'd love to tell you what it is exactly, but I'm at work and it's at home). However, I can get no further! Interesting to note that on the ELSA device, the 'LAN Collision' light is permanently on.

First thought - maybe it needs a crossover, rather than a *normal* cable? However, I would expect this to be documented in the manual (how dangerous assumptions are!). Other than that - clueless! I'm only a programmer... ;-)
stigthew is offline   Reply With Quote
Old 04-08-2004, 13:29   #6
stigthew
Inactive
 
Join Date: Aug 2004
Posts: 6
stigthew is an unknown quantity at this point
Re: ELSA Lancom L-11 Wireless Access Point

Thanks for the update - have to confess I don't understand the difference though - why would it cause me such grief?
stigthew is offline   Reply With Quote
Old 04-08-2004, 13:31   #7
Neil
Inactive
 
Join Date: Jun 2003
Posts: 6,058
Neil has a bronze arrayNeil has a bronze arrayNeil has a bronze array
Neil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze array
Re: ELSA Lancom L-11 Wireless Access Point

Thing is-that Elsa device may have an ethernet port, but it is looking to "connect" as you say (like a DSL connection) as it has a DSL router built into it, when all you really need is a 54G wireless router (IMHO)

I still think your issue is wrong hardware m8, sorry.
Neil is offline   Reply With Quote
Old 04-08-2004, 13:33   #8
Neil
Inactive
 
Join Date: Jun 2003
Posts: 6,058
Neil has a bronze arrayNeil has a bronze arrayNeil has a bronze array
Neil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze array
Re: ELSA Lancom L-11 Wireless Access Point

Quote:
Originally Posted by stigthew
Thanks for the update - have to confess I don't understand the difference though - why would it cause me such grief?
Cable connections don't 'connect' per se (DSL asks you for a username/password when you connect as it is pretty much a glorified dial up connection), whereas your cable connection allows you in via your I.P/username/password, but not dialling in.

I hope that makes sense....
Neil is offline   Reply With Quote
Old 04-08-2004, 13:35   #9
stigthew
Inactive
 
Join Date: Aug 2004
Posts: 6
stigthew is an unknown quantity at this point
Re: ELSA Lancom L-11 Wireless Access Point

In summary, then, it may work for an ADSL (BT-style connection), but it's an expensive (well, £25) doorstop where cable is concerned?
stigthew is offline   Reply With Quote
Old 04-08-2004, 13:42   #10
Neil
Inactive
 
Join Date: Jun 2003
Posts: 6,058
Neil has a bronze arrayNeil has a bronze arrayNeil has a bronze array
Neil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze array
Re: ELSA Lancom L-11 Wireless Access Point

Quote:
Originally Posted by stigthew
In summary, then, it may work for an ADSL (BT-style connection), but it's an expensive (well, £25) doorstop where cable is concerned?
Pretty much I think.

My advice would be to get a decent wireless router. They are not that much more expensive, bit they are a lot more user friendly.

I've got a Belkin, but lots of peeps recommend Linksys & Netgear too.

HTH.
Neil is offline   Reply With Quote
Old 04-08-2004, 13:45   #11
stigthew
Inactive
 
Join Date: Aug 2004
Posts: 6
stigthew is an unknown quantity at this point
Re: ELSA Lancom L-11 Wireless Access Point

What does that fella on 'The Fast Show' say? Oh yeah, that's it...bugger! ;-)

Neil, thanks very much for the guidance, I won't waste any more of my time trying to set it up and everyone else's time asking daft questions!
stigthew is offline   Reply With Quote
Old 04-08-2004, 13:49   #12
Neil
Inactive
 
Join Date: Jun 2003
Posts: 6,058
Neil has a bronze arrayNeil has a bronze arrayNeil has a bronze array
Neil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze arrayNeil has a bronze array
Re: ELSA Lancom L-11 Wireless Access Point

Quote:
Originally Posted by stigthew
What does that fella on 'The Fast Show' say? Oh yeah, that's it...bugger! ;-)

Neil, thanks very much for the guidance, I won't waste any more of my time trying to set it up and everyone else's time asking daft questions!
No worries m8, that's what we're here for!

Like I said, get one of the wireless routers I linked to above, & you won't have any issues (+ there are loads of peeps on the site that are well clued up when it comes to wireless! )

Just one thing-are the wireless cards in your laptop(s) 802.11B, or 802.11G? If they are B, then it may not be worth getting a G router, that's all.

Good luck, let us know how you get on.
Neil is offline   Reply With Quote
Old 04-08-2004, 14:11   #13
SMHarman
Inactive
 
Join Date: Jun 2003
Services: Cablevision
Posts: 8,305
SMHarman is cast in bronzeSMHarman is cast in bronzeSMHarman is cast in bronzeSMHarman is cast in bronze
SMHarman is cast in bronzeSMHarman is cast in bronzeSMHarman is cast in bronzeSMHarman is cast in bronzeSMHarman is cast in bronzeSMHarman is cast in bronzeSMHarman is cast in bronzeSMHarman is cast in bronzeSMHarman is cast in bronzeSMHarman is cast in bronzeSMHarman is cast in bronzeSMHarman is cast in bronzeSMHarman is cast in bronzeSMHarman is cast in bronzeSMHarman is cast in bronzeSMHarman is cast in bronzeSMHarman is cast in bronzeSMHarman is cast in bronzeSMHarman is cast in bronze
Re: ELSA Lancom L-11 Wireless Access Point

But then the cost difference for g is minimal and this will future proof the purchase. a 11Mb BB connection is forseeable, this would make the wireless part the slowest link. A 54Mb BB connection is sufficiently far away that the hardware will have outlived is useful life.
SMHarman is offline   Reply With Quote
Old 04-08-2004, 14:16   #14
zovat
Inactive
 
zovat's Avatar
 
Join Date: Oct 2003
Location: Bracknell
Age: 56
Services: NTL Telephone 3M Broadband - CM Sky TV
Posts: 1,246
zovat has reached the bronze age
zovat has reached the bronze agezovat has reached the bronze agezovat has reached the bronze agezovat has reached the bronze agezovat has reached the bronze agezovat has reached the bronze agezovat has reached the bronze agezovat has reached the bronze age
Send a message via MSN to zovat
Re: ELSA Lancom L-11 Wireless Access Point

Quote:
Originally Posted by SMHarman
But then the cost difference for g is minimal and this will future proof the purchase. a 11Mb BB connection is forseeable, this would make the wireless part the slowest link. A 54Mb BB connection is sufficiently far away that the hardware will have outlived is useful life.
I would agree with that, I have a "G" router (Linksys WRT54G), but all my devices are "B".
As and when I upgrade kit, I will get "G" cards, and not have to replace my router.

I cannot forsee needing more than 54Mb connection for my wireless devices, and the wired are 100Mb switched, so no issues there either.
zovat is offline   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 03:12.


Server: lithium.zmnt.uk
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum