ntl digital thru a TV card

[badnbusy]

Hi guys

Here is my current setup:

Digital TV downstairs - living room
Cable modem upstairs - near PC

I have just bought a TV card for this PC. I am now looking to get ntl's tv service onto my computer via the TV card. I know that I can just buy another box from ntl, but I do not need this, I just want to watch the same channel as what's on downstairs

So what I would like to know is....

What would i need to be able to watch TV on my computer? Is there something like a "TV-link" equivalent of Sky, so I can use the remote control upstairs too?

And how would i run a co-ax cable to the upstairs PC?

Thanks for the help,
James

Does the card have a composite video in, or just RF?
If it will take composite video then the easiest way to do it would be to use a wireless video sender. You can get them to send back the IR commands back down to the STB but Im not sure if any of them work with the Bromley STBs.

[badnbusy]

Just RF in unfortunately. What next

Originally Posted by badnbusy

Just RF in unfortunately. What next

OK then you will to run coax from your STB to your PC card. You wont be able to get stereo sound from your PC tho as the RF connection is mono only.
Not sure about the remote control tho.

[Tricky]

Originally Posted by badnbusy

Just RF in unfortunately. What next

The AEI Videosender available at Argos for about £80
You can purchase a Composite to RF Converter (I have one and it works fine - damn TV's without SCART sockets!)
Scart Convertor

Originally Posted by Tricky

The AEI Videosender available at Argos for about £80
You can purchase a Composite to RF Converter (I have one and it works fine - damn TV's without SCART sockets!)
Scart Convertor

This would save you having to run the coax round the house!
You can get a digisender/reciever for about 50 quid.

[Tricky]

Originally Posted by Proppinupthebar

This would save you having to run the coax round the house!
You can get a digisender/reciever for about 50 quid.

You can probably find the converter cheaper than £20 also - I would try maplins or something...

[badnbusy]

cheers

[badnbusy]

Hi guys! Actually, my card HAS "s-video" and "composite" (the yellow one) in. Whats the best way to connect my STB, which is downstairs, to my PC.

Originally Posted by badnbusy

Hi guys! Actually, my card HAS "s-video" and "composite" (the yellow one) in. Whats the best way to connect my STB, which is downstairs, to my PC.

You just need the wireless video sender downstairs and the reciever upstairs. Plug the reciever into the composite in of the PC card, along witht the audio. Video sender can be fed from scart or phono outputs from STB. Only trouble with this method is you are stuck with whatever aspect ratio the downstairs STB is set to.

One other thing. If your'e using a wireless PC network then you will have to be a bit careful which channel you set up the video sender (they have 4 channels). My wireless network interferes with my cameras picture.

[badnbusy]

Thanks for the help!

Will this wireless system be perfect? I.E. will there be no dropped frames or laggy processing?

My TV card has:

- Coax input
- SVideo In
- Composite In
- Audio In (3.5in jack)

I know with this video sender i'll be using the composite connection, but how will i get sound too?

Originally Posted by badnbusy

Thanks for the help!

Will this wireless system be perfect? I.E. will there be no dropped frames or laggy processing?

My TV card has:

- Coax input
- SVideo In
- Composite In
- Audio In (3.5in jack)

I know with this video sender i'll be using the composite connection, but how will i get sound too?

You wont get dropped frames or laggy processing as the video sender just modulates the composite video onto a 2.4GHz carrier, theres no processing to speak of. It can be prone to interference, but you have 4 channels to try. For sending round the house its brilliant.
You will need a phono to stereo jack converter to get the sound from the video recievers audio outs. Maplin do them probably 2 quid or so.

[badnbusy]

Good

I found this little device. Would this be good enough?

http://www.tranwo.com/product_htm/product_2020.html

What i plan on doing, for the tranmitter, is using a scart -> 3 phono plugs lead from the STB.

And for the receiver, using the composite out to composite in on my TV card, and getting a phono to stereo jack convertor to transfer the sound to the jack input on the TV card.

Do i make sense?

Cheers

[badnbusy]

this the phono/jack lead i need?:



or, this: