You are currently viewing our boards as a guest which gives you limited access to view most of the discussions, articles and other free features. By joining our Virgin Media community you will have full access to all discussions, be able to view and post threads, communicate privately with other members (PM), respond to polls, upload your own images/photos, and access many other special features. Registration is fast, simple and absolutely free so please join our community today.
Is this something that Telewest did for you originaly,?
They used to run a cable from the box through a splitter so you could watch cable in another room as long as it was the same channel.
I think you are right. Yes.
It works for the original box ( same channel piped to another room on cable) but same arrangement doesn't work for the new drive box.
Maybe the drive box needs to be on a different setting to the original box.
If the connections have been made up as the same as before it could be the RF output frequency that is different on the new box .
Put the cable box on to a channel you recognise and then
retune one of the other Tvs and see if it will pick up the cable channel.
Tell me how it goes.
Services: Twest Phone, Digital Tv. TVDrive
Blueyonder 4meg
Posts: 11
Re: Splitting TV drive signal around the house
HI What you must remember is that TV DRIVE will only output via the rf port when set to scart, If it is set to HDMI, or, Component all other outputs are dead.
Hope this helps, Stuart
Join CF
You are here: 
Splitting TV drive signal around the house
.
