Getting terrestial channels using a splitter

bunnahnah · 25-02-2004, 18:15

Hi,

Some of you may have seen my post 2-3 weeks ago regarding a NTL house move install. Well, suffice to say that NTL finally got around to installing the cable modem today. Hooray!

Anyhow, I found out today that I am able to get terrestial channel off the NTL cable to my TV. However, I did not manage to ask the engineer to loan/give me a splitter. I was wondering if anyone here has bought a splitter or knows if I can get one off NTL free? This way, I can watch terrestial TV and surf the Net!

Thanks for reading!

bun

eein · 27-02-2004, 13:15

You can buy splitters from electonics shops like Maplin, RS and Farnell. Not sure the exact type or standard though. Not sure how connecting 'third party' stuff sits with teh ntl t&cs though.

I have a few splitters that I have collected over the addresses I have had ntl at. They take the box back, but never the cable and splitters!

paulyoung666 · 27-02-2004, 13:33

you shouldnt play with the coax

bunnahnah · 27-02-2004, 14:31

I guess Paul is quite right that I should not play with the co-ax. Actually the biggest thing that worries me is that I will kill the upstream communication from my cable modem if I use a splitter not supplied by NTL.:pp

On the other hand, I am interested to know what splitters do NTL use? 5-1000MHz ones, I suppose. eein

, maybe you can enlighten me.

confusion_boy · 29-02-2004, 12:11

Hi Mate,

Ive been using the 2 Way F-Type splitter (code QQ69A) from Maplin for over a year and ive never had any problems with it whatsoever... although thats not to say there have been no problems... just not the splitters fault!

Hope this helps,

Mike

eein · 04-03-2004, 09:51

Quote:

Originally Posted by bunnahnah

I guess Paul is quite right that I should not play with the co-ax. Actually the biggest thing that worries me is that I will kill the upstream communication from my cable modem if I use a splitter not supplied by NTL.:pp

On the other hand, I am interested to know what splitters do NTL use? 5-1000MHz ones, I suppose. eein

, maybe you can enlighten me.

The one I have in front of my jsut now does indeed say 5-1000MHz on it.

An RF splitter is an RF splitter regardless of who made it, but I would still agree that using an ntl one is advisable, if only to ensure you use the right spec.

A_KILLJOY · 12-03-2004, 17:56

Quote:

Originally Posted by eein

The one I have in front of my jsut now does indeed say 5-1000MHz on it.

An RF splitter is an RF splitter regardless of who made it, but I would still agree that using an ntl one is advisable, if only to ensure you use the right spec.

Okay so at last I will be able to record terrestial whilst watching a cable channel.
At the risk of a sking a stupid question are you talking about a splitter before or after the STB ~ i assume you mean before and that the terrestial channels are carried on top of the digital signal, or have I got the wrong end of this thread /

geoffneck · 24-03-2004, 16:02

Im interested in this. I presume from what i've read... The cable coming from my wall box goes to a splitter (already installed). One cable goes off to the STB and the other off to BB.

I want to view NTL normally, but record terrestrial on my PC. Do i put another splitter on the cable going to the STB (after the installed splitter) and direct the coax direct into my (about to buy) Hauppage 250 ariel in?

Nemesis · 24-03-2004, 16:07

The splitter goes before the STB .. I have this done already. Cable enters house and is split, one feeds standard tele to all rooms the other is split again feeding 2 STB's. Not had any problems at all. Splitters were supplied by NTL engineer ...

geoffneck · 25-03-2004, 13:49

NEMESIS>> Do you know how much NTL charge for an extra STB?

Mark G · 25-03-2004, 15:28

Quote:

Originally Posted by geoffneck

NEMESIS>> Do you know how much NTL charge for an extra STB?

ÃƒÆ’Ã†â€™ÃƒÂ¢Ã¢â€šÂ¬Ã…Â¡ÃƒÆ’Ã¢â‚¬Å¡Ãƒâ€šÃ‚Â£15 a month

bubs999 · 05-08-2007, 18:57

Sorry to drag up an old thread, but it came up in the search

I take it this splitter could be used to feed a STB (V+) and then the 2nd feed, to a cable modem?

This is what I have in the loft that was installed by NTL years ago, but I want to move my cable modem to a new room.

MovedGoalPosts · 05-08-2007, 19:20

Cable TV and broadband feeds share the same connection via the splitters, so yes in theory change the cable length and you can relocate kit. Just be very careful. The wrong type of cable, a poorly formed connection and you'll degrade your own signal and potentially that of your neighbours. Even just changing the cable type or length can affect the wiring resistance and thus cause you problems. It's why in the VM terms of use, cable prior to your set top box or modem is for Virgin Media, not the customer to maintain.

largo · 10-08-2007, 11:41

The splitters used by Virgin are Qamtex. Specifically designed for use on cable systems.
It's wise to only use this type and not cheapo rubbish from city stores.
You can buy these, Just do a search for qamtex.
C..

Felim_Doyle · 09-10-2007, 09:33

I take it that the VM supplied splitter for the set-top-box and cable modem is just a resistive splitter and does not contain any RF components such as high/low pass filters as used with ADSL. Also, VM specify which socket on the filter should go to the STB and which should go to the CM. Does this imply that the splitter is asymmetric (i.e. different resistance on once side from the other)?

Basically, when I installed my cable modem recently I put the VM splitter in first and fed the STB side to my existing four way (yes 4-way!) splitter. The CM worked fine but the STB couldn't hold onto the signal. If I could do away with the VM splitter and feed the CM from my own without degrading the broadband signal that would be great. Alternatively, I could just get a smaller filter as I don't really need all four outputs.