Forum Articles
  Welcome back Join CF
You are here You are here: Home | Forum | illegal operation

You are currently viewing our boards as a guest which gives you limited access to view most of the discussions, articles and other free features. By joining our Virgin Media community you will have full access to all discussions, be able to view and post threads, communicate privately with other members (PM), respond to polls, upload your own images/photos, and access many other special features. Registration is fast, simple and absolutely free so please join our community today.


Welcome to Cable Forum
Go Back   Cable Forum > Computers & IT > General IT Discussion
Reload this Page NSLU2 with UnSLUNG Firmware just died...
Register FAQ Members List Calendar Mark Forums Read

NSLU2 with UnSLUNG Firmware just died...
Reply
 
Thread Tools
Old 24-10-2007, 22:19   #1
Tricky
Inactive
 
Tricky's Avatar
 
Join Date: Jun 2003
Location: I am house...
Services: $KY+HD - BT Infinity
Posts: 2,284
Tricky is the helpful oneTricky is the helpful oneTricky is the helpful oneTricky is the helpful oneTricky is the helpful oneTricky is the helpful oneTricky is the helpful oneTricky is the helpful oneTricky is the helpful oneTricky is the helpful oneTricky is the helpful oneTricky is the helpful oneTricky is the helpful oneTricky is the helpful oneTricky is the helpful oneTricky is the helpful oneTricky is the helpful one
NSLU2 with UnSLUNG Firmware just died...
I have (had) a NSLU2, upgraded the firmware a week ago to UnSlung v6.8 - all has been fine other than some funnies with creating user shares and them not appearing without a reboot of the SLUG.

Anyway, left the device on today for the first time and when I came home tried to connect to my shares and nothing. I could ping the device but that was it. Tried a reboot and the only lights I get are the ethernet nothing at all for the USB drive and nothing for the Status/Ready light.

Tried all the usual reset for 10 seconds etc. but nothing.

If I hadn't had it working last night I would have thought I'd bricked it during the upgrade but it has been fine.

I tried letting both the device and power supply cool down but it's still the same.

Any ideas? - I have a RMA number to return the device but if I don't have too I'd rather not.
Tricky is offline   Reply With Quote
Advertisement
Old 25-10-2007, 17:44   #2
dragon
Inactive
 
Join Date: Jan 2004
Posts: 3,898
dragon has reached the bronze age
dragon has reached the bronze agedragon has reached the bronze agedragon has reached the bronze agedragon has reached the bronze agedragon has reached the bronze agedragon has reached the bronze agedragon has reached the bronze agedragon has reached the bronze agedragon has reached the bronze agedragon has reached the bronze age
Re: NSLU2 with UnSLUNG Firmware just died...
Try booting it without the drives attached if it boots then then its something thats starting off your drive.

If it won't boot then then its unsling itself if it does boot then its something on your HDD thats trying to start and killing it.

If the bootloaders intact I believe its possible to force reflash it by catching it just before it actually trys to boot its firmware.

I did have a unslung NSLU2 for a while but unfortunately I wasn't using it much so flashed it back to stock firmware and gave my dad it.
dragon is offline   Reply With Quote
Old 25-10-2007, 22:58   #3
Tricky
Inactive
 
Tricky's Avatar
 
Join Date: Jun 2003
Location: I am house...
Services: $KY+HD - BT Infinity
Posts: 2,284
Tricky is the helpful oneTricky is the helpful oneTricky is the helpful oneTricky is the helpful oneTricky is the helpful oneTricky is the helpful oneTricky is the helpful oneTricky is the helpful oneTricky is the helpful oneTricky is the helpful oneTricky is the helpful oneTricky is the helpful oneTricky is the helpful oneTricky is the helpful oneTricky is the helpful oneTricky is the helpful oneTricky is the helpful one
Re: NSLU2 with UnSLUNG Firmware just died...
Nah still doesn't boot without drives - thanks for suggestion though
CityLink are booked to pick it up tomorrow now and return for a refund
Just annoying cos it was working fine might just resort to leaving a PC on 24/7
Tricky is offline   Reply With Quote
Old 25-10-2007, 23:31   #4
dragon
Inactive
 
Join Date: Jan 2004
Posts: 3,898
dragon has reached the bronze age
dragon has reached the bronze agedragon has reached the bronze agedragon has reached the bronze agedragon has reached the bronze agedragon has reached the bronze agedragon has reached the bronze agedragon has reached the bronze agedragon has reached the bronze agedragon has reached the bronze agedragon has reached the bronze age
Re: NSLU2 with UnSLUNG Firmware just died...
Quote:
Originally Posted by Tricky View Post
Nah still doesn't boot without drives - thanks for suggestion though
CityLink are booked to pick it up tomorrow now and return for a refund
Just annoying cos it was working fine might just resort to leaving a PC on 24/7
I had a NAS caddy but it was to unstable, couldn't be bothered to spend money on another one so i just put a pci sata card in an old pc.

although I usually only run it when I want something off it.
dragon is offline   Reply With Quote
Reply

« Previous Thread | Next Thread »
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 14:37.

Contact Us - Service Status - Cable Forum - Archive - Privacy Statement - Terms of Service - Top

Server: osmium.zmnt.uk
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum
Copyright © 2026 Cable Forum Hosted On Hetzner Cloud