
OK I need a bit of help with this one as it has foxed me completely.
I have used a TV card in my PC to record video from a video recorder, freeview and other sources successfully. With ntl, whether I use the coax style cable or composite, I get a flicker on the screen. I thought when I got a new Samsung box it would fix it but no. The nearest I have got is using the coax style cable (not great quality) and turning up the video resolution on my Nvdia card so the monitor runs at 75 instead of 60.
OK that's the first problem done with. I also want to be able to output the PC screen to the TV, which works perfectly unless ntl is plugged into another scart socket on the TV. While ntl is attached I get the same flicker on the TV. This happens also if I disconnect the TV card altogether. If I go round the back of the TV and unplug the ntl scart then it works fine and the flicker stops. It flickers even when the ntl stb is switched off abut as soon as I remove the scart it stops.
Somehow this flicker / banding is transmitted from the ntl source and I can't stop it whatever I do.
I've now had this problem through 3 different PCs and 3 ntl stbs and 4 video cards.
What is ntl doing to cause this? Is the power on the connection too strong? Is there some outside interference I can filter out somehow?
Someone must have used a TV card and output something other than ntl to the same TV at the same time.
Any advice greatfully received.