120M : Not getting 152mb

[DOT COTTON]

Had cable installed last week, just did a speed test and its averaging 50up/12down. Does it take a while for the speed to rise or is there a fault?

Thanks
DOROTHY COTTON (MRS)

[NuttehButteh]

Oooh I say!

First off - click here please ma

http://192.168.0.1/cgi-bin/VmRouterS...perationCfgCgi

What does the Primary Downstream Service Flow & Primary Upstream Service Flow say?

The Max traffic rate for 152 service is 168960000 bps down and 12600000 bps up

If all else fails, hit it with a Elsie Tanner - sawted!

[qasdfdsaq]

It does not take a while for speed to rise. There's a number of possibilities, in order of likelihood, wireless, testing methodology, congestion, network fault.

[pip08456]

Originally Posted by qasdfdsaq

It does not take a while for speed to rise. There's a number of possibilities, in order of likelihood, wireless, testing methodology, congestion, network fault.

You forgot bodged install, rarer now I think but still possible.

[DOT COTTON]

Originally Posted by NuttehButteh

Oooh I say!

First off - click here please ma

http://192.168.0.1/cgi-bin/VmRouterS...perationCfgCgi

What does the Primary Downstream Service Flow & Primary Upstream Service Flow say?

The Max traffic rate for 152 service is 168960000 bps down and 12600000 bps up

If all else fails, hit it with a Elsie Tanner - sawted!

Primary Downstream Service Flow SFID 46833
Max Traffic Rate 168960000 bps
Max Traffic Burst 16320 bytes
Min Traffic Rate 8448000 bps
Primary Upstream Service Flow SFID 46800
Max Traffic Rate 12600000 bps
Max Traffic Burst 16320 bytes
Min Traffic Rate 0 bps
Max Concatenated Burst 16320 bytes
Scheduling Type Best Effort

Is the speed test over wifi or cabled computer?

[DOT COTTON]

Originally Posted by Hugh

Is the speed test over wifi or cabled computer?

Wifi - dont have an ethernet to test wired, but im right beside the router.

[Synthetic]

Go on Dot!

Looks like you're on the right config profile, what are your power levels? http://192.168.0.1/cgi-bin/VmRouterS...wnstreamCfgCgi

[DOT COTTON]

Frequency (Hz) 299000000 267000000 275000000 283000000 291000000 307000000 315000000 323000000
Lock Status(QAM Lock/FEC Sync/MPEG Lock) Locked Locked Locked Locked Locked Locked Locked Locked
Channel ID 13 9 10 11 12 14 15 16
Modulation 256QAM 256QAM 256QAM 256QAM 256QAM 256QAM 256QAM 256QAM
Symbol Rate (Msym/sec) 6.952000 6.952000 6.952000 6.952000 6.952000 6.952000 6.952000 6.952000
Interleave Depth I=12
J=17 I=12
J=17 I=12
J=17 I=12
J=17 I=12
J=17 I=12
J=17 I=12
J=17 I=12
J=17
Power Level (dBmV) -0.61 -0.63 -0.42 -0.42 -0.37 -0.45 -0.51 -0.66
RxMER (dB) 38.98 37.94 38.26 38.26 38.98 38.61 37.64 37.64

[Synthetic]

Power levels look alright, could be just crap wifi, but you'd need to test wired to confirm

[DOT COTTON]

Wish my boy Nick was still here, he'd know what to do. Anyway coco and bed dears, church in the morning

[qasdfdsaq]

Many cheap wireless cards have a practical maximum speed of about 50Mbps.

http://www.cableforum.co.uk/board/12...l#post35722142

[jb66]

did cheesy feet technician not leave you an ethernet cable?

[General Maximus]

just to clarify the above: there is a highly likelihood that if you connected your laptop or pc directly to the router by wire that you will get max speed. The problem with wireless is that there are many types of network cards which perform at varying degrees, then there is the distance you are from the router and interference as well such as the signal going through walls. Some people can get full speed or close to it if they have bought the right equipment but like qas said, the average over wireless is 50mbits. This doesn't mean that there is a problem with your connection though and that you couldn't get full speed if you chose an optimum connection media.

[DOT COTTON]

Thanks everyone