power levels

iain_herts · 04-06-2005, 11:44

hi can any1 please check these out there is nothing wrong with BB but the levels seem to have droped a bit.

Downstream Receive Power Level : 2.29 dBmv
Downstream SNR : 34.20 dB
Upstream Transmit Power Level : 44.50 dBmv

The Upstream Transmit Power Level used to be somewhere in the 50's.

thanks for takeing a look at this.

iain

Paul K · 04-06-2005, 11:45

Seem within tolerance according to
http://www.cableforum.co.uk/board/sh...66&postcount=1

iain_herts · 04-06-2005, 11:51

thanks paul.

iain

penfolder · 15-06-2005, 21:27

Just checked my power levels and referenced previous from Ignition on this site. current reading are as below. seems outside of tolerances - whats the best course of action please?

thanks

M

Downstream Value Frequency 402750000 Hz Locked Signal to Noise Ratio 31 dB QAM 64 Network Access Control Object ON Power Level -13 dBmV The Downstream Power Level reading is a snapshot taken at the time this page was requested. Please Reload/Refresh this Page for a new reading Upstream Value Channel ID 4 Frequency 36800000 Hz Ranged Ranging Service ID 76 Symbol Rate 2.560 Msym/s Power Level 50 dBmV

Ignition · 15-06-2005, 21:29

If it's affecting your service call tech support, otherwise leave it be. So long as it works there's no problem at the moment

penfolder · 15-06-2005, 21:51

thanks Ignition - I often read but not post - and have come to respect your advice. no problems now - but just concerned that it might be going off - used to be 7 then 9 then 11 and now 13...

M

Ignition · 15-06-2005, 21:59

Quote:

Originally Posted by penfolder

thanks Ignition - I often read but not post - and have come to respect your advice. no problems now - but just concerned that it might be going off - used to be 7 then 9 then 11 and now 13...

M

Ok, sounds like the local network is drifting a bit on power levels. All things being well the local network crew will spot this before it becomes an issue and will 'line up' the network and sort it as part of their normal maintenance.

Power levels can also change due to the weather.

If you start seeing your connection getting unstable though, don't hesitate to call in, it's what the TSB are there for.

kibblerok · 06-07-2005, 23:24

just checked mine.....

Downstream Receive Power Level : -17.3 dBmV

according to the sticky, that doesnt look very good

BBKing · 07-07-2005, 08:15

Not too good - drop me your MAC address and I'll check the other four indicators and try and see if they give us a clue.

kibblerok · 07-07-2005, 16:36

now constantly hitting -18.0 and higher

2old4this · 10-07-2005, 20:07

Hi
Can Someone tell how to do a power level check

http://root:root@192.168.100.1/ comes up as page not displayed

Chris W · 10-07-2005, 21:24

Quote:

Originally Posted by 2old4this

Hi
Can Someone tell how to do a power level check

http://root:root@192.168.100.1/ comes up as page not displayed

what sort of modem do you have? is it an ntl badged ambit?

2old4this · 16-07-2005, 11:00

Quote:

Originally Posted by Chris W

what sort of modem do you have? is it an ntl badged ambit?

its a NTL Home 120 modem

Chris W · 17-07-2005, 20:45

Quote:

Originally Posted by 2old4this

its a NTL Home 120 modem

You are using the right login then, but you may have to reboot the modem to get to the page.

Also, make sure you do not have a proxy server specified in tools-> internet options-> connections-> lan settings

BenRyder · 16-08-2005, 13:30

I could do with a bit of help. Had problems recently with the connection dropping out and a few websites not working, or taking a long time to load.

My signal levels are:

Downstream Receive Power Level : -21.0 dBmV
Downstream SNR : 24.8 dB
Upstream transmit Power Level : 61.0 dBmV

Could that be why? I have a NTL 250 Badged Modem. Thought I'd ask you guys in here first rather than try on the phones!

Ben.