Forum Articles
  Welcome back Join CF
You are here You are here: Home | Forum | cd-rw problems

You are currently viewing our boards as a guest which gives you limited access to view most of the discussions, articles and other free features. By joining our Virgin Media community you will have full access to all discussions, be able to view and post threads, communicate privately with other members (PM), respond to polls, upload your own images/photos, and access many other special features. Registration is fast, simple and absolutely free so please join our community today.


Welcome to Cable Forum
Go Back   Cable Forum > Computers & IT > General IT Discussion
Reload this Page Am i crippling my system?
Register FAQ Community Calendar

Am i crippling my system?
Reply
 
Thread Tools
Old 17-12-2004, 14:01   #1
jtwn
Inactive
 
Join Date: Nov 2003
Location: Grimsby
Posts: 2,004
jtwn has reached the bronze age
jtwn has reached the bronze agejtwn has reached the bronze agejtwn has reached the bronze agejtwn has reached the bronze agejtwn has reached the bronze agejtwn has reached the bronze agejtwn has reached the bronze age
Am i crippling my system?
OK, before i start, this is what i understand so...probably is wrong

Ive got two sticks of 256mb ram, one pc2100 and the other pc3200, one will be running at 133 and the other 166 respectively (my Athlon xp 2600 Thoroughbred B runs at 166x12.5).

Now as one of the sticks is running at less than the fsb, i'm losing out on a small bit of performance? If i was to oc, since i cut my mobo/cpu idle temps in half with the new case i got (yes, half ) would i still benefit in performance with the stick of ram that can support the increased fsb (i have got to (what would be) higher than a 2900+ without changing the vcore/temps good/a lockup).

One more question, are future amd pci-e boards going to have more than 2 slots for ram? Just had to spend 60 quid on customs charges so my ram money has dwindled (poor student )

Thanks
jtwn is offline   Reply With Quote
Advertisement
Old 17-12-2004, 14:02   #2
Dave Stones
Inactive
 
Join Date: Jun 2003
Location: Selly Oak, Birmingham
Age: 41
Services: BT Broadband Option 3, BT Landline, Freeview
Posts: 3,214
Dave Stones has reached the bronze age
Dave Stones has reached the bronze ageDave Stones has reached the bronze ageDave Stones has reached the bronze ageDave Stones has reached the bronze ageDave Stones has reached the bronze ageDave Stones has reached the bronze ageDave Stones has reached the bronze ageDave Stones has reached the bronze ageDave Stones has reached the bronze ageDave Stones has reached the bronze ageDave Stones has reached the bronze ageDave Stones has reached the bronze ageDave Stones has reached the bronze ageDave Stones has reached the bronze ageDave Stones has reached the bronze ageDave Stones has reached the bronze ageDave Stones has reached the bronze ageDave Stones has reached the bronze ageDave Stones has reached the bronze ageDave Stones has reached the bronze age
Send a message via MSN to Dave Stones
Re: Am i crippling my system?
i thought RAM always ran at the lowest frequency if there were mismatches?
Dave Stones is offline   Reply With Quote
Old 17-12-2004, 14:18   #3
Jon M
Inactive
 
Jon M's Avatar
 
Join Date: Oct 2003
Location: East Midlands
Age: 48
Services: Rural BB - Radio Link via Virgin Fibre
Posts: 2,947
Jon M has a bronze arrayJon M has a bronze arrayJon M has a bronze array
Jon M has a bronze arrayJon M has a bronze arrayJon M has a bronze arrayJon M has a bronze arrayJon M has a bronze arrayJon M has a bronze arrayJon M has a bronze arrayJon M has a bronze arrayJon M has a bronze arrayJon M has a bronze arrayJon M has a bronze arrayJon M has a bronze arrayJon M has a bronze arrayJon M has a bronze arrayJon M has a bronze arrayJon M has a bronze arrayJon M has a bronze array
Send a message via MSN to Jon M
Re: Am i crippling my system?
yes, dave is right.. you cannot run two freqencies... it will always revert to the lower of the two if set to SPD settings.

it is possible that you've managed to overclock the 2100 to 166mhz (2700 speeds) .. I very much doubt that you'll be able to go much higher though.

you will get the best performance when matching memory and FSB speeds, although your bios may not give you the choice

as far as memory slots go.. you'll most likely see 4 slots on standard ATX.. but it differs from manufacturer to manufacturer.
Jon M is offline   Reply With Quote
Old 17-12-2004, 18:14   #4
jtwn
Inactive
 
Join Date: Nov 2003
Location: Grimsby
Posts: 2,004
jtwn has reached the bronze age
jtwn has reached the bronze agejtwn has reached the bronze agejtwn has reached the bronze agejtwn has reached the bronze agejtwn has reached the bronze agejtwn has reached the bronze agejtwn has reached the bronze age
Re: Am i crippling my system?
Well that clears things up

I've actually had it on 'aggressive' settings in the bios, thats at 166mhz, but manually can get it up to 183mhz before crashes and whatnot. I would keep it permanently oc'ed but i cannot play Half-Life 2 singleplayer without 'memory could not be read' errors every 10 minutes or so. Every other intensive test i've tried it worked fine...Thanks anyway
jtwn is offline   Reply With Quote
Reply

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 18:40.

Contact Us - Service Status - Cable Forum - Archive - Privacy Statement - Terms of Service - Top

Server: lithium.zmnt.uk
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
All Posts and Content are © Cable Forum
Copyright © 2026 Cable Forum Hosted On Hetzner Cloud